Abstract:Guided mode resonances (GMR) can be made angle insensitive using conical mounting of the grating relative to the external illumination. Conical mounting has been previously utilized for linear optical applications, such as optical filtering, and sensing. Here we present Third Harmonic Generation (THG) enhancement from 10 nm amorphous silicon overlayer on silicon nitride-based one-dimensional sub-wavelength grating GMR structures under conical-mounting illumination. The designed structure comprising of 70 nm deep silicon dioxide gratings of 1054 nm pitch, 50% duty cycle over which 160 nm thick silicon nitride and 10 nm a-Si layers are deposited is resonant at 1580 nm for TE polarized excitation. With increased angular spread of the incident excitation, the GMR spectral width and contrast are known to degrade. The angular aperture of the GMR structures studied here, which is defined as the angular spread across which the resonance drops to 50% of its peak value is calculated as 0.46 and 5.2 for classical and full-conical illumination respectively, highlighting the angular insensitivity of the full-conical mounting condition. Rectangular aperture masks placed in the back focal plane of the objective lens are used to limit the illumination angle along the grating wave-vector direction when compared to the grating line direction, thus achieving conical mounting condition. Experimentally, we observe the THG enhancement, defined as the ratio of on- to off-grating THG, improves from 2860 to 4742 and 1.7x104 by utilizing 0.06 NA objective and illuminating in classical configuration (no aperture) with rectangular apertures of size 3x13 mm and 1.5x13 mm respectively.

Enhancement of 3rd-harmonics generation during ultrashort pulse diffraction in multi-layer volume-grating

Enhanced Second Harmonic Generation Efficiency Via Wavefront Shaping

Enhanced third harmonic generation in layered guided mode resonant structures using pupil engineered conical excitation

Enhanced Third Harmonic Generation by Introducing Quasi-Phase Mismatches Due to Electro-Optic Effect

Efficient Third-Harmonic Generation Based on Tamm Plasmon Polaritons

Third-Harmonic Generation in A Linbo3 Channel Waveguide with A Quasi-Periodic Grating

Quasi-Phase-Matched Third-Harmonic Generation In A Quasi-Periodic Optical Superlattice

Enhanced terahertz third-harmonic generation based on the graphene-assisted meta-grating structure

Cerenkov Third-Harmonic Generation Via Cascaded Χ^(2) Processes in a Periodic-Poled LiTaO_3 Waveguide

Enhanced Fourth Harmonic Generation Via Nonlinear Čerenkov Interaction in Periodically Poled Lithium Niobate Crystal.

Simultaneous High-Efficiency and Equal-Level Second- and Third-Harmonic Generation Achieved by Controllable Linear Gratings in A Quasiperiodic Optical Superlattice

Enhanced wide-angle third-harmonic generation in flat-band-engineered quasi-BIC metagratings

Tunable third harmonic generation based on high-Q polarization-controlled hybrid phase-change metasurface

Efficient Second Harmonic Generation in a Reverse‐Polarization Dual‐Layer Crystalline Thin Film Nanophotonic Waveguide

Cascaded Third-Harmonic Generation in Optically induced 3D Nonlinear Photonic Crystals

Experimental Demonstration of High-Efficiency Harmonic Generation in Photonic Moiré Superlattice Microcavities

Third-Harmonic Generation by Use of Focused Gaussian Beams in an Optical Superlattice

[Effects of Xuefu Zhuyu decoction on EPCs function].

Quadratic Cascading in Quasi-Phase-Matching: An Alternative Route to Efficient Third-Harmonic Generation

Third-Harmonic Generation in A General Two-Component Quasi-Periodic Optical Superlattice

Conical Third-Harmonic Generation in A Hexagonally Poled Litao3 Crystal