Sexual Dimorphism in Rana temporaria, as exhibited in rigor mortis.

F. Crew

Journal of Anatomy

Abstract:

What problem does this paper attempt to address?

Multi-objective Optimization of Urban Water Allocation Considering Recycled Water

Siwei Chen,Xu Yue-Ping,Yuxue Guo,Xinting Yu

DOI: https://doi.org/10.21203/rs.3.rs-2303660/v1

2022-01-01

Abstract:Abstract The use of recycled water is an essential means of resolving urban water scarcity. To realize the coordinated allocation of conventional and recycled water, a multi-objective water resources optimal allocation model with recycled water is established. The model takes into account the impact of the carbon footprint on the regional ecology during the total water allocation process, which has not been given enough attention before. Simultaneously, this study combined direct policy search, nonlinear approximation networks and multi-objective evolutionary algorithms to design Pareto approximation operating policies for joint conventional and recycled water allocation. The AHP-Entropy method based on combinatorial assignment of weights is then used to perform multi-attribute decision making on the optimized operating policies for scientific selection of solutions. The proposed model is demonstrated in Yiwu City, China, which suffers from the water shortage due to the rapid development of industry. Results show that radial basis functions can effectively design Pareto approximation operating policies for the water supply system of Yiwu City. The inclusion of recycled water can result in a 31.67% reduction in water shortage and an 8.45% increase in economic benefit, while carbon emissions only increase by 1.78%. This result illustrates the use of recycled water can alleviate urban water scarcity, increase economic benefits, and mitigate carbon emissions to some extent. Multi-attribute decision making based on the AHP-Entropy method provides a scientific basis for optimalurban multi-water allocation.
Landuse Optimizing Allocation Based on Extensible Multi-Objective Ant Colony Algorithm

MO Zhiliang,DU Zhenhong,ZHANG Feng,LIU Renyi

DOI: https://doi.org/10.3785/j.issn.1008-9497.2017.06.003

2017-01-01

Abstract:The traditional land use optimizing allocation model can't flexibly response to the changing optimizing requirements under the realities ,and can't achieve the optimization of land use in spatial layout .This paper abstracts modeling based on the common optimizing targets ,and establishes an extensible multi-objective system combining with the ant colony algorithm .Finally ,a land use optimizing allocation model based on extensible multi-objective ant colony algorithm is constructed ,making the land use optimizing allocation more flexible under the direction of different multi-objective systems ,realizing the unification of land use optimizing allocation in structure and spatial layout ,and providing a more practical reference for land use planning .The Xiaoshan district of Hangzhou is an area of good economic ,social and ecological environment ,which makes it a good choice of our study area to verify the model .The experimental results show that the model can reasonably allocate the land use layout of the study area under the guidance of multi-objective system ,promote the sustainable development of regional land use ,and give different optimization schemes for different multi-objective systems .
A Multi-Objective Optimization Model Using Improved NSGA-II for Optimizing Metal Mines Production Process

Xiaowei Gu,Xunhong Wang,Zaobao Liu,Wenhua Zha,Xiaochuan Xu,Minggui Zheng

DOI: https://doi.org/10.1109/access.2020.2972018

IF: 3.9

2020-01-01

IEEE Access

Abstract:Production process optimization is an indispensable step in industrial production. The optimization of the metal mines production process (MMPP) can increase production efficiency and thus promote the utilization rate of the metal mineral resources in the frame work of sustainable development. This study establishes a multi-objective optimization model for optimizing the MMPP by maximizing economic and resource benefits. To get better non-dominated Pareto optimal solutions, an improved non-dominated sorting genetic algorithm-II (NSGA-II) is proposed. The symmetric Latin hypercube design is adopted to generate the initial population with high diversity. The mutation and crossover of the differential evolution algorithms are introduced into the NSGA-II to replace the genetic algorithm for improving convergence. The control parameters of the mutation scale factor and crossover rate of the differential evolution algorithm are adaptively adjusted to improve the diversity of candidate solutions. To verify the performance of the improved NSGA-II, four test functions from the ZDT series functions are chosen for experimentation. The experimental results indicate that the improved NSGA-II outperforms the comparative algorithms in diversity and convergence. Moreover, the application of the proposed method to the Yinshan copper mines shows that the improved NSGA-II is effective in optimizing the MMPP and a reliable method in promoting utilization rate of metal mineral resources in the framework of sustainable development.

computer science, information systems,telecommunications,engineering, electrical & electronic
A multi-objective optimization model for medical waste recycling network design under uncertainties

Liang Shen,Xiang Xu,Feng Shao,Hu Shao,Yanxin Ge

DOI: https://doi.org/10.1016/j.tre.2024.103492

2024-04-01

Abstract:Transporting medical waste (MW) generated by medical institutions (MIs) is a process that poses potential threats to the environment and public safety. Therefore, it is vital to find a safe and efficient way to transport this type of waste to disposal centers (DCs). However, there are challenges in the transportation of MW due to random factors such as the generation of waste in an unpredictable manner and unforeseen travel times. In this paper, we propose a bi-level optimization model to minimize site selection costs, transportation costs, time-window penalties costs, and transportation risks under uncertainties. The concepts of “loading reliability”, “travel time reliability” and “transportation risk” are adopted in the proposed optimization model. The simulated annealing algorithm (SA) is employed to address the optimal location problem (Upper level), which involves minimizing the construction cost, transportation cost (DC-CP-DC), and transportation risk (estimated using Bayesian method). To tackle the capacity-constrained vehicle routing problem considering transportation risk and time window penalties (Lower level), we propose an improved genetic algorithm named harmony search algorithm (IHSGA). Subsequently, the results from the lower level are looped back to the upper level, fostering mutual influence between the two stages. We demonstrate the effectiveness and correctness of the proposed model and algorithm using S city in China as an illustrative example. Furthermore, a series of sensitivity analyses were conducted to examine the impact of various factors. The findings highlight the pivotal roles of both travel time reliability and loading reliability in designing the medical waste recycling network. In comparison to the general Genetic Algorithm (GA) and CPLEX solver, the modified IHSGA presented in this paper exhibits superior performance.

transportation,transportation science & technology,engineering, civil,operations research & management science,economics
A multi-objective decision model for investment in energy savings and emission reductions in coal mining

Shiwei Yu,Shuhong Zheng,Siwei Gao,Juan Yang

DOI: https://doi.org/10.1016/j.ejor.2016.12.023

IF: 6.4

2017-07-01

European Journal of Operational Research

Abstract:Coal-mining companies should clearly be investing in energy savings and treatment technologies aimed at reducing both their energy consumption and their pollution levels in order to meet the requirements of government regulations relating to environmental protection; however, when considering the types of technical equipment to use and the timing of their investment, these companies also need to consider their profits and the costs of such investment. We therefore propose a "multi-objective mixed integer non-linear programming" (MMINLP) model of investment in energy savings and emission reductions designed to handle this type of decision-making problem. Given three objectives (maximum profits, minimal energy consumption and minimal pollution), we develop a hybrid mixed-coding ``particle swarm optimization and multi-objective non-dominated sorting genetic algorithm-II" (PSO–NSGA-II) to optimize the continuous and discrete decision variables as a means of helping companies to reach the optimum decision. We also integrate the subtractive clustering-multi-criteria tournament decision-gain analysis method (SC–MTD–GAM) to select the best trade-off solutions on the optimal Pareto fronts. Finally, we carry out a case study of investment decisions on energy savings and emission reductions in the Zhenzhou Coal Industry (Group) Co., Ltd., China, with the results revealing that the proposed model can support decision making for energy savings and emission reductions in coal mining areas. As compared with the NSGA-II and ``non-dominated sorting particle swarm optimization" (NSPSO) algorithms, the proposed PSO–NSGA-II is found to have better convergence, coverage and uniformity.

operations research & management science
A novel model for sustainable production scheduling of an open-pit mining complex considering waste encapsulation

Jingsi Lin,Mohammad Waqar Ali Asad,Erkan Topal,Ping Chang,Jinxin Huang,Wei Lin

DOI: https://doi.org/10.1016/j.resourpol.2024.104949

IF: 8.222

2024-03-31

Resources Policy

Abstract:This work presents a novel mixed integer programming model for simultaneous optimisation of ore production and waste dumping schedule for an open-pit mining complex. The model maximises net present value and generates an optimal flow of materials from multiple sources (open pits, stockpiles) to destinations (processing streams, stockpiles, waste dumps) within the supply chain of a mining complex. In addition, the proposed model implements sustainable mining practices as it ensures the responsible disposal of potentially acid forming waste. An application of the new simultaneous and the traditional two-step (or sequential) methods confirms that the proposed method derives higher net present value and reflects a distinct advantage in addressing the acid mine drainage problem through encapsulation of potentially acid forming wastes. In addition, the results reveal that the new model requires less waste haulage work leading to a significant reduction in greenhouse gas emissions.

environmental studies
Location Optimization of Urban Mining Facilities with Maximal Covering Model in GIS: A Case of China

Yanyan Xue,Zongguo Wen,Xiaoli Ji,Hans Th. A. Bressers,Chenkai Zhang

DOI: https://doi.org/10.1111/jiec.12467

2016-01-01

Journal of Industrial Ecology

Abstract:SummaryUrban mining offers an efficient supply of resources because of rich mines and low environmental impacts. Location selection and optimization for urban mining facilities is more complicated than for natural mines, given that it may vary according to the urban population, consumption habits, and economic development. China initiated the National Urban Mining Pilot Bases program in 2010 that targeted 50 national urban mining pilot bases, but unfortunately neglected the location planning issue. Twenty‐eight bases have already been selected, which are concentrated in the central and eastern areas of China. This article combines the use of analytic hierarchy process, maximal covering location model, and geographical information systems (GIS) software to optimize locations for China's urban mining pilot bases. Primary findings show that, theoretically, 40 urban mining pilot bases can sufficiently provide maximum gross domestic product (GDP) and population coverage service for China. Taking the current 28 bases as a precondition and 50 bases as the remaining policy target, our second optimization results in a list of 22 cities for the location selection of future urban mining pilot bases. In total, the optimized 22 cities, together with the selected 28 bases, can provide a maximum 97.5% of GDP and 95.1% of population coverage in China. This study illustrates the optimization process for urban mining recycling facilities in general and provides policy advice for China in a specific case.
Optimizing the WEEE Recovery Network Associated with Environmental Protection Awareness and Government Subsidy by Nonlinear Mixed Integer Programming

Yanan Bo,Yanqi Wang,Zhong Wan

DOI: https://doi.org/10.1155/2019/9858670

IF: 2.249

2019-08-18

Journal of Advanced Transportation

Abstract:Recovery of waste electrical and electronic equipment (WEEE) plays an important role in protecting environment and conserving resources. Design of a more efficient WEEE recovery system is an imperative need for the relevant decision-makers, such as alleviation of overcapacity or insufficient recycling in many developing countries. In this paper, we optimize the WEEE recovery network which is associated with recycling prices and government subsidies by a nonlinear mixed integer programming approach. An integrated model is first proposed to formulate a design problem of WEEE recovery network, being involved with collection centers, two types of transfer stations, processing centers, incineration plants, landfill plants, secondhand product markets, and government subsides. The recycling prices and the transported quantities of WEEE (the number of batches) are endogenous variables of the model, being subject to a number of practical constraints. For solving this model, an algorithm is developed based on the branch and bound method. Scenario analysis and numerical experiments indicate that: ( 1 ) appropriate capacities of transfer stations can be provided by the proposed model for designing an environmentally and economically efficient WEEE recycling system, especially for alleviating the existing overcapacity or insufficient recycle. ( 2 ) An optimal governmental subsidy can be obtained in virtue of the proposed model and algorithm. ( 3 ) Diversity of transportation modes and permission of more than one mode in the same delivery route can greatly reduce the cost of recycling WEEE. ( 4 ) Preferred awareness of environmental protection can increase the profit and the recycled quantities, as well as reduction of the total recycling cost.

transportation science & technology,engineering, civil
A multi-objective and multi-period optimization model for urban healthcare waste’s reverse logistics network design

Zhiguo Wang,Lufei Huang,Cici Xiao He

DOI: https://doi.org/10.1007/s10878-019-00499-7

2019-12-05

Journal of Combinatorial Optimization

Abstract:Various types of healthcare waste (or medical waste) generated by urban healthcare activities have increased due to the expansion of urban population and medical needs. As healthcare wastes are harmful to both the environment and human health, managing medical waste is becoming progressively more important. Constructing an optimized medical waste recycling network is one of the key problems in the management of urban healthcare waste. This paper conducts a two-stage reverse logistics network design for urban healthcare waste. The first stage involves the prediction of the amount of medical waste. Based on the Grey GM(1,1) prediction model, the amount of medical waste in multi-period of the target hospitals is predicted. In the second stage, a multi-objective model aimed at minimizing operating costs and minimizing environmental impact is developed for facilities allocation decisions, which include the configuration of key facilities such as hospitals, collection centers, transshipment centers, processing centers, and disposal sites, as well as medical waste flow control among facilities. A dynamic approach for the healthcare waste reverse logistics network is constructed by combining the Grey GM(1,1) prediction method with multi-objective optimization model. Sensitivity analysis of key parameters has been performed to analyze their impact on network performance. Some insightful management practices have been revealed.

mathematics, applied,computer science, interdisciplinary applications
A bi-level multi-objective location-routing model for municipal waste management with obnoxious effects

Yanfang Ma,Wen Zhang,Cuiying Feng,Benjamin Lev,Zongmin Li

DOI: https://doi.org/10.1016/j.wasman.2021.08.034

IF: 8.816

2021-11-01

Waste Management

Abstract:Municipal waste management is a complex problem. This paper develops a bi-level multi-objective location-routing model for municipal waste management that considers the interests of both the government and the sanitation companies. The government as the leader decides on the location and scale of the waste recycling centers to reduce the obnoxious effects and ensure cost effectiveness, and the sanitation company as the follower decides on the waste collection routing plans based on the government-approved locations to minimize the logistics cost. An improved hybrid NSGA-II is then developed to solve the proposed model. Two initial solution methods are employed: clustering for the leader and a Clarke and Wright method for the follower. Non-dominated sorting and best-cost route crossover operator are used to improve the effectiveness of NSGA-II. Based on Prins (24 instances) and Barreto (13 instances) benchmarks, the experimental results indicated that the improved operator had strong competitiveness and a better performance than previous methods, with the improved algorithm achieving the best average gaps of 0.18% and 0.24% and improving the best-known solutions in some instances. The model and solution methodology are illustrated using a waste collection problem in Tianjin, from which practical insights are derived.

environmental sciences,engineering, environmental
Simultaneous stochastic optimisation of mining complexes: Integrating progressive reclamation and waste management with contextual bandits

Zachary LevinsonRoussos DimitrakopoulosCOSMO – Stochastic Mine Planning Laboratory,Department of Mining and Materials Engineering,McGill University,Montreal,Quebec,Canada

DOI: https://doi.org/10.1080/17480930.2024.2342687

IF: 3.022

2024-05-11

International Journal of Mining Reclamation and Environment

Abstract:Managing environmental performance of waste dump facilities in mining complexes is an integral part of long-term production planning. Sustainable long-term production scheduling solutions are desired to mitigate risk and return the environment to a productive post-mining state. A simultaneous stochastic optimisation framework for long-term production scheduling in mining complexes is developed that integrates waste management and progressive reclamation. The waste dump placement schedule is jointly optimised with the extraction sequence, destination policy, and stockpiling decisions in a single stochastic mathematical programming framework. This includes the timing of progressive reclamation activities in parallel with production to enhance waste dump rehabilitation. Uncertainty related to the production of acid rock drainage is quantified by simulating geochemical properties of waste and managing the blending of uncertain waste properties within the optimisation framework. With respect to the framework for simultaneous stochastic optimisation, contextual bandits are explored to improve the metaheuristic solution approach and solve the corresponding large-scale optimisation model. The framework is tested in a multi-mine copper-gold mining complex leading to improved environmental performance. Risk of acid rock drainage is decreased by 52.5% in the waste dump facilities. Reclamation planning activities for meeting environmental requirements are scheduled prior to closure. The solution approach more effectively improves the objective function with contextual bandits leading to a 24% improvement in the study presented.

environmental sciences,mining & mineral processing
Coal mine water management: optimization models and field application in North China

Qiang Wu,Bill X. Hu,Li Wan,Chunmiao Zheng

DOI: https://doi.org/10.1080/02626661003798310

2010-05-26

Hydrological Sciences Journal

Abstract:This paper considers the complexity in resolving the conflicts between mine drainage, water supply, and environmental protection for the coal basin of North China, and presents a management optimization framework that addresses these multiple conflicting issues simultaneously in the most cost effective manner. Due to the various unpredictable accidents which may occur in the coal mining process, such as water bursts, gas leaks, fire and collapse of coal beds, the beneficial use of drainage water from the coal mines is generally low. This case study attempts to address the problem of low beneficial usage for drainage water using the Jiaozuo coal mining district in Henan Province, China. By combining a finite-element groundwater simulation model with an optimization code, the economic benefits of using the drainage water as a stable water supply is maximized, while the adverse impact of mine drainage on the environment is controlled. The results indicate that the management model developed in this study achieves an excellent economic outcome and can serve as a potentially powerful tool for solving mining-related water management problems in the coal basin of North China. Citation Wu, Q., Hu, B. X., Wan, L. & Zheng, C. (2010) Coal mine water management: optimization models and field application in North China. Hydrol. Sci. J. 55(4), 609–623.
Multi-objective location-routing optimization based on machine learning for green municipal waste management

Yunyun Niu,Chang Xu,Shubing Liao,Shuai Zhang,Jianhua Xiao

DOI: https://doi.org/10.1016/j.wasman.2024.04.001

2024-05-30

Abstract:Most of the existing municipal waste management (MWM) systems focus on the optimization of the waste disposal center locations and waste collection paths, which can be modeled based on the location-routing problem (LRP). This study models a green MWM system by a three-objective location-routing problem to achieve equilibrium among the total cost, carbon emission, and residential satisfaction. The amount of waste demand for each customer is considered as an independent discrete random variable following a normal distribution. The multi-objectives and non-deterministic characteristics make this problem more intractable than the traditional LRP. A multi-objective optimization algorithm based on decision tree classifier is proposed for solving this problem. The decision tree classifier learns from previous searching experience, and then guides the following evolution process to avoid blind searching. The experimental results show that the proposed algorithm has high competitiveness compared with other state-of-art methods. A case study is also conducted for a real waste collection problem in a certain area of Beijing. The proposed method adopts efficient location-routing strategies to balance the total cost, carbon emissions, and distance between residential areas and waste disposal centers.
Dual-objective modeling and optimization of a low-carbon waste-classified collection problem

Xulong Lu,Xujin Pu,Hongfeng Wang,Yaping Fu

DOI: https://doi.org/10.1007/s11356-022-24547-8

IF: 5.8

2022-12-18

Environmental Science and Pollution Research

Abstract:With improved quality of life, types of waste have become increasingly complex, and waste classification has become a global issue. As a result, the world is facing a waste-classified collection problem. However, the existing research on waste collection has paid little attention to waste classification. In this paper, we consider the pretreatment and classification of waste transfer stations. In recent years, global warming caused by carbon emissions has become a serious problem. Therefore, this work proposes the first dual-objective multi-depot two-echelon green vehicle routing system with various pickups to optimize waste-classified collection based on a mixed-integer programming model. To ensure the efficiency of our developed model, we designed a multiobjective brainstorming optimization algorithm with a novel clustering strategy based on the rank-clustering method and differential mutation. Compared with two classical multiobjective optimization algorithms in various generated test instances and a real-world case, the experimental results showed that the proposed model can help sanitation departments improve the economic and environmental benefits of waste-classified collection, and the proposed algorithm is an excellent optimizer for solving associated problems.

environmental sciences
Urban Construction Waste Recycling Path: Robust Optimization

Fan Wu,Shue Mei,Haiying Xu,Wei-Ling Hsu

DOI: https://doi.org/10.3390/buildings13112802

IF: 3.324

2023-11-08

Buildings

Abstract:The world produces a huge amount of urban construction waste each year. Scientific planning of the construction waste recycling path is urgently needed to improve the recycling of construction waste. Existing construction waste recycling models do not pay sufficient attention to the uncertainty of the recycling quantity, which limits their ability to provide support for solving practical problems. The purpose of this paper is to solve the problem of uncertain recycling quantities in optimizing the urban construction waste recycling path. Thus, this paper first builds a recycling model for a deterministic environment with the economic objective as the decision criterion and the transportation flow, construction waste treatment capacity and capability, and environmental and social impact as the constraints. Then, a robust optimization method is adopted to optimize the deterministic model for the uncertainty of the recycling quantity. The data of this paper are from Nanjing, China. The validity of the model and the evolution of the recycling path are tested based on the data of Nanjing. The findings of this paper are as follows: Firstly, the robust model is cost-effective in the face of uncertainty in supply. Secondly, the robust model has greater total treatment capacity. Even in the worst-case scenario, it can guarantee a higher treatment capacity. Thirdly, both models follow the proximity principle which reduces the transportation costs and only slowly increases the total cost of the robust model. This paper provides a scientific and convenient tool to plan the recycling path of construction waste in large cities.

construction & building technology,engineering, civil
Optimization Model of Regional Mine Intensive Transportation System

Li Bao,Li Guoqing,Hu Nailian,Hou Jie,Huang Shuwei,Pan Tao

2017-01-01

Abstract:In view of the characteristics of regional mineral deposit mining,complex transportation system network and difficult to control transportation costs,a optimization model of regional mine transportation system based on complex network planning is constructed. Under the condition of regional exploitation,the comprehensive transportation system is integrated to realize the high efficiency,economy and scientific validity of regional mine transportation system. Based on analyzing the re-quirements of technical and economic index,the relationship between spatial location and establish the principle of system opti-mization,the system network diagram is established,the optimization model that considering the stope distribution,transporta-tion methods,transport links and other factors are proposed, which goal is minimum comprehensive transportation cost. The global optimal scheme of regional underground mine transportation system is obtained by using computer technology and net-work flow theory. Taking a metal mine in our country as the study example,the performance of the optimization model proposed in this paper is verified,the optimal regional transportation route is obtained and the lowest transportation cost is calculated. The study results show that the optimization model established in this paper can not only meet the requirements of comprehen-sive management and intensive operations,but also can ensure the safe,economic and efficient operation of the mine transporta-tion.
A Spatial Multi-Objective Optimization Model for Sustainable Urban Wastewater System Layout Planning.

X. Dong,S. Zeng,J. Chen

DOI: https://doi.org/10.2166/wst.2012.113

IF: 2.43

2012-01-01

Water Science & Technology

Abstract:Design of a sustainable city has changed the traditional centralized urban wastewater system towards a decentralized or clustering one. Note that there is considerable spatial variability of the factors that affect urban drainage performance including urban catchment characteristics. The potential options are numerous for planning the layout of an urban wastewater system, which are associated with different costs and local environmental impacts. There is thus a need to develop an approach to find the optimal spatial layout for collecting, treating, reusing and discharging the municipal wastewater of a city. In this study, a spatial multi-objective optimization model, called Urban wastewateR system Layout model (URL), was developed. It is solved by a genetic algorithm embedding Monte Carlo sampling and a series of graph algorithms. This model was illustrated by a case study in a newly developing urban area in Beijing, China. Five optimized system layouts were recommended to the local municipality for further detailed design.
A robust mixed integer linear programming framework for underground cut-and-fill mining production scheduling

Shuwei Huang,Guoqing Li,Eugene Ben-Awuah,Bright Oppong Afum,Nailian Hu

DOI: https://doi.org/10.1080/17480930.2019.1576576

2019-02-27

Abstract:A review of general optimization studies that have been proposed for underground mining shows that previous works lack flexibility, operability and practicality in relation to cut-and-fill mining production scheduling. This paper presents a robust mixed integer linear programming (MILP) formulation for underground cut-and-fill mining. The objective function of the model is to maximize the net present value (NPV) of the operation while meeting all mining and processing operational and technical constraints. The MILP model features stope development and extraction sequencing constraints, mining and processing tonnage fluctuation constraints, and extraction duration and active levels control constraints. These features make the model more practical and expandable. The MILP model is verified and validated with two case studies from an existing mine and the results are compared with the actual mining strategy. The comparison shows a 9% to 17% improved NPV in both case studies resulting from mining higher grades and processing less tonnes thereby generating a better cash flow.
Multi-Objective Optimization of a Mine Water Reuse System Based on Improved Particle Swarm Optimization

Yang Liu,Zihang Zhang,Lei Bo,Dongxu Zhu

DOI: https://doi.org/10.3390/s21124114

IF: 3.9

2021-06-15

Sensors

Abstract:This paper proposes a general hierarchical dispatching strategy of mine water, with the aim of addressing the problems of low reuse rate of coal mine water, and insufficient data analysis. First of all, water quality and quantity data of the Narim River No. 2 mine were used as the research object; the maximum reuse rate of mine water and the system operation rate comprised the objective function; and mine water quality information, mine water standard, and mine water treatment speed were the constraints. A multi-objective optimization scheduling mathematical model of water supply system was established. Then, to address the problems of premature convergence and ease of falling into a local optimum in the iterative process of particle swarm optimization, the basic particle swarm optimization was improved. Using detailed simulation research, the superiority of the improved algorithm was verified. Eventually, the mine water grading dispatching strategy proposed in this paper is compared with the traditional dispatching method. The results show that the hierarchical dispatching system can significantly improve the mine water reuse rate and system operating efficiency.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
A Multiobjective Approach For Integrated Environmental Economic Planning Under Uncertainty

Rui Zou,Huaicheng Guo,Bin Chen

DOI: https://doi.org/10.1080/02630250008970286

2000-01-01

Civil Engineering and Environmental Systems

Abstract:This paper proposes an inexact multi-objective mixed integer programming (IMOMIP) approach to deal with the uncertainty and complexity involved in decision making for regional sustainable development. The proposed model framework represents system uncertainty with interval numbers, and addresses complexity through a multi-objective optimization formulation. Inexact continuous and discrete decision variables are integrated, therefore enabling the optimal decision regarding sector activity and expansion of the sectors, WWTP, forests, etc., to be made within a holistic optimization framework. The proposed algorithm dissociates the control of each objective, thus allowing convenient interaction between the model and decision makers, as well as an efficient compromise between the competing objectives.The IMOMIP method is applied to the integrated economic environmental system planning for the Haichang Investment Zone (HIZ) in China, and solved under two scenarios. The difference between the two solutions indicates that decision makers' preference has significant influence on the model's behavior, However, both scenarios' solutions achieve reasonable compromise between all objectives, including economic benefit, water resources, and water and air quality, thus providing potential alternatives for sustainable development in the study area.

Sexual Dimorphism in Rana temporaria, as exhibited in rigor mortis.

Multi-objective Optimization of Urban Water Allocation Considering Recycled Water

Landuse Optimizing Allocation Based on Extensible Multi-Objective Ant Colony Algorithm

A Multi-Objective Optimization Model Using Improved NSGA-II for Optimizing Metal Mines Production Process

A multi-objective optimization model for medical waste recycling network design under uncertainties

A multi-objective decision model for investment in energy savings and emission reductions in coal mining

A novel model for sustainable production scheduling of an open-pit mining complex considering waste encapsulation

Location Optimization of Urban Mining Facilities with Maximal Covering Model in GIS: A Case of China

Optimizing the WEEE Recovery Network Associated with Environmental Protection Awareness and Government Subsidy by Nonlinear Mixed Integer Programming

A multi-objective and multi-period optimization model for urban healthcare waste’s reverse logistics network design

A bi-level multi-objective location-routing model for municipal waste management with obnoxious effects

Simultaneous stochastic optimisation of mining complexes: Integrating progressive reclamation and waste management with contextual bandits

Coal mine water management: optimization models and field application in North China

Multi-objective location-routing optimization based on machine learning for green municipal waste management

Dual-objective modeling and optimization of a low-carbon waste-classified collection problem

Urban Construction Waste Recycling Path: Robust Optimization

Optimization Model of Regional Mine Intensive Transportation System

A Spatial Multi-Objective Optimization Model for Sustainable Urban Wastewater System Layout Planning.

A robust mixed integer linear programming framework for underground cut-and-fill mining production scheduling

Multi-Objective Optimization of a Mine Water Reuse System Based on Improved Particle Swarm Optimization

A Multiobjective Approach For Integrated Environmental Economic Planning Under Uncertainty