Abstract:Disc insulators serve as the primary insulating and supporting components in transmission lines. Pollution flashover incidents pose challenges for power practitioners. The disc insulator's ribs can improve the flashover voltage. However, pollution flashover are more likely to occur when there are arc bridges between insulator ribs. This study aims to investigate the impact of insulator ribs on the development path of arcs and flashover performance. The experimental circuit for flashover is constructed to analyze the arc's behaviour and evaluate the insulation performance. Utilizing flashover voltage gradients and creepage distances to evaluate the effectiveness of insulator structures. The insulator forms an arch hinge when two adjacent ribs are close in length, and the uneven air pressure within the arch hinge creates a thrust that causes the arc to break away from the surface and form a bridge. Maintaining a rib spacing to rib length ratio between 0.83 and 1.5 is recommended to prevent arc bridging. Alternating ribs improve creepage distance utilization, enhancing insulation with a recommended rib spacing to rib length ratio between 0.67 and 1.5. Avoiding low or high coefficient values is crucial to prevent arc bridging or inefficient insulator space use. The spacing between the insulator connector and the nearest rib should be more than the length of the rib, otherwise there is an increased likelihood of direct arcing connector the upper and lower umbrella skirts The spacing between the insulator connector and the nearest rib should exceed the rib length and the nearest rib to minimize the risk of direct arcing between the upper and lower umbrella skirts. The research content can provide a theoretical and experimental basis for improving the insulator structure and increasing its flashover voltage.

Evaluation and optimisation of insulator structural effectiveness based on the dynamic behaviour of arc across ribs

The optimization of 750kV anti-ice-flashing composite insulator string

Statistical analysis on the DC discharge path of ice-covered insulators under natural conditions

Modeling of Dry Band Formation and Arcing Processes on the Polluted Composite Insulator Surface

Ice Flashover Performance and Its Characterization Parameter of Composite Insulator with Booster Sheds

Study on Dynamic Flashover Model of Ice-Covered Insulator String

Effect of Arcing on DC Flashover Performance of Contaminated Porcelain Insulators for Various Suspension Patterns at High Altitudes

Study of the effect of ice adhesion on electrical power transmission insulator

An experimental study of the flashover performances of outdoor high-voltage polymeric insulators under fan-shaped pollution and dry band location

Experimental Study on the Flashover Characteristics of 500 Kv AC Ice-covered Insulator String under Different Arrangement

Surface flashover in 50 years: II. Material modification, structure optimisation, and characteristics enhancement

Pollution Flashover Characteristics of Composite Crossarm Insulator with a Large Diameter

Performance analysis of high voltage disc insulators with different profiles in clean and polluted environments using flashover, withstand voltage tests and finite element analysis

Influence of Air-Gap Characteristics on the Icing Flashover Performance for the Plate Model of Composite Insulators

Icing flashover characteristics and discharge process of 500 kV AC transmission line suspension insulator strings

Pollution Flashover Performance of RTV Coatings with Partial Damage

Icing Flashover Characteristics of EHV AC Transmission Line Insulator Strings

DC Flashover Performance of Ice-Covered Composite Insulators with Parallel Air Gaps

Wet Snow Flashover Characteristics Of The Insulator Strings In " Lambda " Shape On 500 Kv Transmission Lines

Nonlinear Traits of Leakage Current and Dynamic Actions of Surface Discharges on Ice-Covered Insulators under DC Voltages

Wet Snow Flashover Characteristics of 500-Kv AC Insulator Strings with Different Arrangements