Abstract:In this paper, a theoretical analysis of how the excitation conditions affect the sapphire fiber Fabry-Perot interferometer (SFPI) visibility was performed. The conditions were considered, in which an SFPI was excited by a single-mode fiber (SMF), a multimode fiber (MMF), and a fiber collimator. The finite difference method (FDM) was used to realize the numerical solution of the modal electric fields, and then, the modal excited distributions in the sapphire fiber and the SFPI visibility were calculated. The results showed that different numbers of modes were excited in sapphire fibers under different excitation conditions and finally affected the fringe visibility of the SFPI. The fiber collimator excited the fewest modes and the visibility remained at the highest level. Finally, an experiment was performed, and the experimental results agreed well with the theoretical results.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to analyze how different excitation conditions affect the fringe visibility of sapphire fiber Fabry - Perot interferometers (SFPI). Specifically, it studies the changes in the interferometer fringe visibility when the SFPI is excited by single - mode fiber (SMF), multimode fiber (MMF) and fiber collimator. Through theoretical analysis and experimental verification, the influence of mode excitation distribution under different excitation conditions on the SFPI fringe visibility is explored, aiming to improve the performance of SFPI in high - temperature sensing applications.
### Research Background
Optical fiber sensors have received extensive attention in recent years because of their small size, light weight, anti - electromagnetic interference and easy embedding. However, conventional quartz fiber sensors will become soft and unusable in an environment exceeding 1000 °C. To meet the sensing needs in an ultra - high - temperature environment, researchers began to focus on sapphire fibers with a melting point as high as 2050 °C. Due to the birefringence effect of sapphire fibers, the commonly used sapphire fiber is c - axis sapphire fiber, whose cross - section is hexagonal, with a diameter usually between 50 μm and 200 μm and a non - cladding structure.
### Research Questions
1. **Mode Excitation Distribution**: How do different excitation conditions (single - mode fiber, multimode fiber and fiber collimator) affect the mode excitation distribution in sapphire fibers?
2. **Fringe Visibility**: How does the change in mode excitation distribution affect the fringe visibility of SFPI?
3. **Optimization Method**: How to improve the fringe visibility of SFPI by reducing the number of modes in sapphire fibers?
### Research Methods
1. **Theoretical Analysis**:
- Use the finite difference method (FDM) to calculate the electric field distribution in sapphire fibers under different excitation conditions.
- Calculate the coupling efficiency of different modes to obtain the mode excitation distribution.
- Based on the mode excitation distribution, calculate the fringe visibility of SFPI under different cavity lengths.
2. **Experimental Verification**:
- Build an experimental system, connect different types of transmission fibers (SMF, MMF and fiber collimator), and measure the fringe visibility under different excitation conditions.
- Adjust the micro - displacement stage to change the FP cavity length, record the spectral data, and calculate the fringe visibility.
### Main Findings
1. **Mode Excitation Distribution**:
- When excited by multimode fiber, the number of excited modes is the largest and mainly distributed in the first 200 modes.
- When excited by single - mode fiber, the number of excited modes is relatively small and scattered among all mode orders.
- When excited by fiber collimator, the number of excited modes is significantly reduced to 6, mainly concentrated in the 1st, 6th and 15th - order modes.
2. **Fringe Visibility**:
- When the cavity length increases, the fringe visibility of SFPI excited by multimode fiber drops rapidly and drops to 1.91% at 1300 μm.
- The fringe visibility of SFPI excited by single - mode fiber drops to 6.96% at 1300 μm, but is always higher than that in the case of multimode fiber excitation.
- The fringe visibility of SFPI excited by fiber collimator drops the slowest and still remains at 49.97% even at 1300 μm.
### Conclusion
Through theoretical analysis and experimental verification, the research finds that the fiber collimator is an effective method, which can significantly reduce the number of modes in sapphire fibers, thereby improving the fringe visibility of SFPI. This result provides important theoretical guidance and technical support for the design of SFPI in high - temperature sensing applications.