Abstract:BackgroundScreening in the fed-batch operation mode is essential for biological cultivations facing challenges as oxygen limitation, osmotic inhibition, catabolite repression, substrate inhibition or overflow metabolism. As a screening tool on shake flask level, the membrane-based fed-batch shake flask was developed. While a controlled supply of a substrate was realized with the in-built membrane tip, the possibilities for replenishing nutrients and stabilizing pH values was not yet exploited. High buffer concentrations were initially used, shifting the medium osmolality out of the biological optimum. As the growth rate is predefined by the glucose release kinetics from the reservoir, the resulting medium acidification can be compensated with a controlled continuous supply of an alkaline compound. The focus of this research is to establish a simultaneous multi-component release of glucose and an alkaline compound from the reservoir to enable cultivations within the optimal physiological range of Escherichia coli.ResultsIn combination with the Respiratory Activity MOnitoring System, the membrane-based fed-batch shake flask enabled the detection of an ammonium limitation. The multi-component release of ammonium carbonate along with glucose from the reservoir resulted not only in the replenishment of the nitrogen source but also in the stabilization of the pH value in the culture medium. A biomass concentration up to 25 g/L was achieved, which is one of the highest values obtained so far to the best of the author’s knowledge with the utilization of a shake flask and a defined synthetic medium. Going a step further, the pH stabilization allowed the decrease of the required buffer amount to one-fourth establishing an optimal osmolality range for cultivation. As optimal physiological conditions were implemented with the multi-component release fed-batch cultivation, the supply of 0.2 g glucose in a 10 mL initial culture medium volume with 50 mM MOPS buffer resulted in a twofold higher biomass concentration than in a comparable batch cultivation.ConclusionsThe newly introduced multi-component release with the membrane-based fed-batch shake flask serves a threefold purpose of replenishing depleted substrates in the culture medium, stabilizing the pH throughout the entire cultivation time and minimizing the necessary amount of buffer to maintain an optimal osmolality range. In comparison to a batch cultivation, these settings enable to achieve higher biomass and product concentrations.

Diffusion-driven fed-batch fermentation in perforated ring flasks

Mixing Intensification in a Horizontal Self-Cleaning Twin-Shaft Kneader with a Highly Viscous Newtonian Fluid

Reinventing shake flask fermentation: The breathable flask

Design and evaluation of a 3D‐printed, lab‐scale perfusion bioreactor for novel biotechnological applications

Defining mass transfer in a capillary wave micro-bioreactor

A protocol to transfer a fed‐batch platform process into semi‐perfusion mode: The benefit of automated small‐scale bioreactors compared to shake flasks as scale‐down model

Scaling Fed-Batch and Perfusion Antibody Production Processes in Geometrically Dissimilar Stirred Bioreactors

An Agar Gel Membrane-Pdms Hybrid Microfluidic Device for Long Term Single Cell Dynamic Study

Membrane-aerated microbioreactor for high-throughput bioprocessing

Microfluidic bubbler facilitates near complete mass transfer for sustainable multiphase and microbial processing

Integration of microbial kinetics and fluid dynamics toward model‐driven scale‐up of industrial bioprocesses

Parallel substrate supply and pH stabilization for optimal screening of E. coli with the membrane-based fed-batch shake flask

Pre-stage perfusion and ultra-high seeding cell density in CHO fed-batch culture: a case study for process intensification guided by systems biotechnology

Establishment of a Perfusion Process with Antibody-Producing CHO Cells Using a 3D-Printed Microfluidic Spiral Separator with Web-Based Flow Control

A low-cost, multiplexable, automated flow cytometry procedure for the characterization of microbial stress dynamics in bioreactors

Platform development for high‐throughput optimization of perfusion processes: Part I: Implementation of cell bleeds in microwell plates

Fermentation Strategies for PHB Production in a Novel Membrane Bioreactor: Investigating Batch and Fed-Batch Operations

Numerical Simulation for Distribution and Mass Transfer of Nutrient Substance Within Microbeads in Different Culture Systems

Validation of a high-throughput fermentation system based on online monitoring of biomass and fluorescence in continuously shaken microtiter plates

CFD Simulation of Mixing Process in Stirred Bioreactor and Its Application in Fermentation

Development of mL-scale Pseudo-Perfusion Methodologies for High-Throughput Early Phase Development Studies