An exploratory study of the effects of stormwater pipeline materials on transported stormwater quality

Matthias Borris,Heléne Österlund,Jiri Marsalek,Maria Viklander

DOI: https://doi.org/10.2166/wst.2017.195

Abstract:Implications of three sewer pipe materials (concrete, galvanized corrugated steel, and polyvinyl chloride (PVC)) for stormwater quality were explored in laboratory experiments, in which three types of stormwater, SW1-SW3, were circulated in 0.5 m long sewer pipe sections. SW1 and SW2 represented synthetic rainwater, without and with fine street sediment added (CTSS = 150 mg/L), respectively, and SW3 was actual stormwater with the same sediment addition as SW2. Following 20-min runs, with an equivalent distance of 500 m travelled by water particles, a number of statistically significant changes in the stormwater chemistry were observed: (i) pH of all the simulated stormwaters increased in the concrete pipe (from 7.0-7.3 to 8.1-9.3), (ii) turbidity decreased in two stormwaters with sediments (SW2 and SW3) in concrete and galvanized corrugated steel pipes (by 50 and 85%, respectively), (iii) the type of stormwater affected the observed copper (Cu) concentrations, with Cudiss concentrations as high as 25.3 μg/L noted in SW3 passing through the PVC pipe, and (iv) zinc (Zn) concentrations sharply increased (Zntot = 759-1,406 μg/L, Zndiss = 670-1,400 μg/L) due to Zn elution from the galvanized steel pipe by all three stormwaters. Such levels exceeded the applicable environmental guidelines.