Abstract:Excessive exposure to noises, which corresponds to unwanted and/or unpleasant sounds, poses as a threat to people's health and can cause irritability, insomnia and even hearing loss. To attenuate noises, sound absorbers usually composed of porous materials are widely used. These, which appear as large networks of interconnected pores, are capable of absorbing medium and high sound frequencies, specially, transforming into heat the majority of the sound energy that reaches them. Such dissipations occur due to viscous, thermal and inertial losses resulted from interactions between the solid and fluid phases from which the porous materials are composed of. With the growing demand for acoustic comfort, one of the most important topics in noise control engineering is currently the search for sound absorption materials that provide attenuations in wide frequency ranges with minimum cost, weight and thickness. Fiberglass wool and melamine foam are widely used, and a variety of new porous materials are being developed, such as polymer micro- and nanofiber mats obtained by electrospinning. It is here investigated the acoustic potential of the electrospun polycaprolactone (PCL) fiber mat, normally used as a biomaterial. The sound absorption capacity of a material is given by its sound absorption coefficient ( α ), while its sound insulation capacity is denoted by its transmission loss (TL), and these are normally conflicting. In an impedance tube, through the transfer function and the transfer matrix methods, α and TL curves are here determined for samples of fiberglass wool and melamine foam with 25 mm width, and later these combined with a layer of approximately 0.3 mm of PCL fiber mat. With the addition of a fine layer of those polymeric fibers to both base materials, it was observed expressive gains in the sound absorption and transmission loss potentials in almost all the totality of the frequency range analyzed, which extends from 400 to 2500 Hz. It was also analyzed the morphology of the study materials through Scanning Electron Microscopy (SEM), and their porosities were determined through an optical approach with the aid of X-ray microtomography.

Broadband Response Diaphragm Materials for Human Acoustics Engineering

Multi‐Level Bioinspired Microlattice with Broadband Sound‐Absorption Capabilities and Deformation‐Tolerant Compressive Response (adv. Funct. Mater. 2/2023)

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Multi‐Level Bioinspired Microlattice with Broadband Sound‐Absorption Capabilities and Deformation‐Tolerant Compressive Response

Multifunctional Acoustic and Mechanical Metamaterials Prepared from Continuous CFRP Composites.

Fabrication, sound absorption simulation and performance optimization of multi‐layer gradient fiber‐based composites

Highly efficient acoustic absorber designed by backing cavity-like and filled-microperforated plate-like structure

Preparation and Properties of Foamed Cellulose-Polymer Microsphere Hybrid Materials for Sound Absorption

Acoustic Metamaterial with Air-Backed Diaphragm for Broadband Absorption: A Preliminary Study

Ultra-broadband sound absorption of a multiple-cavity metastructure with gradient thickness

A mechanically adjustable acoustic metamaterial for low- frequency sound absorption with load-bearing and fire resistance

Low-frequency broadband sound absorption of the metastructure with extended tube resonators and porous materials

Biomimetic Coupling Structure Increases the Noise Friction and Sound Absorption Effect

A Composite and Deformable Honeycomb Acoustic Metamaterial

Excellent broadband sound absorption in composites manufactured by embedding piezoelectric polymer aerogels in porous ceramics

The Sound Absorption Performance of Laser-Sintered Composite Biomimetic Wood Porous Structures

Broadband Thin Sound Absorber Based on Hybrid Labyrinthine Metastructures with Optimally Designed Parameters

Hierarchical-porous Acoustic Metamaterials: A Synergic Approach to Enhance Broadband Sound Absorption

New Class of Multifunctional Bioinspired Microlattice with Excellent Sound Absorption, Damage Tolerance, and High Specific Strength.

Enhancing of broadband sound absorption through soft matter

Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool