Abstract:The joining process of seam bond is used in automobile construction because of the non-visible joints on mounted parts such as doors, hoods or luggage compartment doors. With these components, a structure-providing inner panel is joined with the outer panel, which is visible to the customer. Besides providing stability, particularly in the event of a crash, the joining level is also filled with adhesive to increase the stability and to prevent the ingress of moisture that causes corrosion. These mechanical connections must be tested to ensure that the requirements for proper bonding have been met. As the destructive test used today requires metallographic laboratory with special trained personnel, significant scrap cost and a time consuming process control loop, considerable efforts are being made to develop a capable non-destructive and as far as possible in-line test method. State of the art non-destructive inspection systems for seam bonds are insufficient regarding full part accessibility and reliability in terms of detectability and validation. This paper is focussed on new developed free configurable three-transducer ultrasonic phased array technology including algorithms for data validation and evaluation for an automated process control loop in the automotive car body shop. The paper end with an statistical classification based on an 5-month measurement campaign under industrial in-line conditions. In a first step, a list of possible defects was collected and the detectability in different seam areas was calculated by sound field simulation of the amplitude signals. Second, based on the results from simulation, a measurement setup as excitation sequence was defined. Based on the theoretical findings a inspection system was designed and realized. Within a measurement campaign the inspection system was evaluated in terms of detectability of minimal defect size under non-laboratory conditions. This includes a permanent proof of coupling conditions, monitoring of misalignments, e.g. tilting and surface defects of the car body. In the last step, the testing system is build up and tested within the assembly line. These measurement results show that the identification of common process defects is possible.

A study on rocker arm defect inspection based on vision system

A high-resolution detecting system based on machine vision for defects on large aperture and super-smooth surface

Panoramic Optical Annular Staring Inspection System for Evaluating the Inner Surface of a Pipe

Study on the Special Vision Sensor for Detecting Position Error in Robot Precise TIG Welding of Some Key Part of Rocket Engine

Technical Analysis to the Rupture of Rocker-Arm

Integration of Deep Learning Network and Robot Arm System for Rim Defect Inspection Application

Robot-Assisted Ultrasonic Testing Technology for Complex Revolved Workpiece

Robotic Defect Inspection with Visual and Tactile Perception for Large-scale Components

Utilizing Deep Learning for Defect Inspection in Hand Tool Assembly

An Automatic Surface Defect Inspection System for Automobiles Using Machine Vision Methods

Engine Fault Detection Using Vibration Signal Reconstruction in the Crank-Angle Domain

Planning of Robotic Inspection from Visual Tracking of Manual Surface Finishing Tool

A Novel Robotic-Vision-Based Defect Inspection System for Bracket Weldments in a Cloud–Edge Coordination Environment

Noncontact Defect Detection Method of Automobile Cylinder Block Based on SVM Algorithm

A Laser-Based Measuring System for Online Quality Control of Car Engine Block

Detecting Machining Defects inside Engine Piston Chamber with Computer Vision and Machine Learning

An automated non-destructive testing system for seam bondings in automotive serial production

On-Line Monitoring and Defects Detection of Robotic Arc Welding: A Review and Future Challenges

A robot for non-destructive testing weld inspection of offshore mooring chains

An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools

Computer Vision Application for Weld Defect Detection and Evaluation