Abstract:Preparation of woven fabric using cotton‐polyester composite yarn and evaluation of physico‐mechanical and comfort. Cotton is the most widely used natural cellulosic polymer and polyester is a synthetic polymer. The use of polyester fiber is increasing gradually day by day due to its strength and longevity, while the use of cotton fiber is decreasing due to its unavailability. At present, the use of cotton‐polyester composites is ubiquitous. This research work aims to assess the physical, mechanical and comfort properties of the woven fabric using cotton‐polyester composite yarns in a weft direction and coarser yarn count because of the use of these fabrics in the future for the denim manufacturing process. Four different samples were fabricated by using 100% cotton (10 Ne) yarn in the warp direction and 100% cotton, cotton‐polyester composite, and 100% polyester yarn in the weft direction of the fabric. Similar fabric and machine parameters were maintained for manufacturing all the samples. The samples were then tested for areal density, tensile strength, thickness, abrasion resistance and pilling, drape, flexural rigidity, and air permeability to find the optimum capability of the fabric. Physico‐mechanical properties with the proportion of increasing polyester components in fabrics improves areal density (184 to 199 g/m2), strength (almost 19 times in weft direction), drape (0.655% to 0.789%), and flexural rigidity (almost double). On the other hand, increasing comfortability properties with the proportion of cotton components in fabrics improve air permeability (139.85 to 159.58 cc/s/cm2), abrasion (only 3.036% mass loss), and pilling resistance (grading 4 after 2000 cycles). Highlights Composite yarns made of cotton and polyester provide a method of improving fabric properties for better performance. Higher proportions of cotton make clothes more breathable and less likely to pill and wear out. Polyester parts make fabrics stronger, more durable, and less likely to wear out. Cotton‐polyester composites are ideal and have potential for various textile applications. Blending natural and synthetic fibers composite allows for customized fabrics that meet specific performance needs without compromising comfort.

Decreasing the electrostatic discharge generated from friction of polyester and polyamide sing carbon fiberVerringerung der durch Reibung von Polyester und Polyamid erzeugten elektrostatischen Entladung mithilfe von Kohlefasern

Electrostatic manipulation for saturated charging and orientating of recycled short-chopped carbon fibers based on dielectric polarization

Modifying the Poly Ether Ester Antistatic Agent by Carbon Nanotubes, the Antistatic Effect on Polypropylene Fibers

Analysis of the influence of carbon fibers on the electrostatic properties of fabrics intended for the production of protective clothing

Effect of hyperbranched poly(ester amine) additive on electrospinning of low concentration poly(methyl methacrylate) solutions

Preparation of Antistatic Polyester Fiber via Layer-by-Layer Self-Assembly

Tribological behaviour of surface modified carbon-fibre-reinforced polyphenylene sulphide under dry condition

Improving the Antistatic Ability of Polypropylene Fibers by Inner Antistatic Agent Filled with Carbon Nanotubes

Experimental evaluation of the main parameters influencing friction between polyamide fibers and influence of friction on the abrasion resistance

THE STUDY OF CARBON-NANOTUBE/PP FIBER'S ANTISTATIC PROPERTY

Effect of cotton‐polyester composite yarn on the physico‐mechanical and comfort properties of woven fabric

Enhancing Antistatic Ability of Three Organic Antistatic Agent by Carbon Nanotubes

Biopolymer-containing formulations to render acrylic fabrics fire resistant and anti-static

The Influence of Substrate Functionalization for Enhancing the Interfacial Bonding between Graphene Oxide and Nonwoven Polyester

Antistatic effects of silver plated carbon nanotubes on polvmer fiber

Preparation and properties of conductive polypyrrole polyester fabric

Assessment of Impact of the Surface Modification Techniques on Structural, Biophysical, and Electrically Conductive Properties of Different Fabrics

Playing with Low Amounts of Expanded Graphite for Melt-Processed Polyamide and Copolyester Nanocomposites to Achieve Control of Mechanical, Tribological, Thermal and Dielectric Properties

Production and properties of electrically conductive polymer composites reinforced with cotton threads

Effect of Carbon Nanotube Loading on Electrical Properties of Electrospun Polyvinylidene Fluoride (PVDF) Fiber

Boost Up the Mechanical and Electrical Property of CNT Fibers by Governing Lyotropic Liquid Crystalline Mesophases with Aramid Polymers for Robust Lightweight Wiring Applications