Abstract:Abstract Funding Acknowledgements Type of funding sources: Private company. Main funding source(s): Research Support from Siemens Healthineers GmbH. Background In bSSFP sequences commonly used for cardiac MRI, signal modulation (e.g. banding artifacts) due to B0 inhomogeneity is often observed, especially at higher field strengths. The spatial position of these artifacts can be shifted by a frequency offset to reduce artifacts in a region of interest (ROI), e.g. the heart. To this end, frequency scout (FS) scans are acquired to visually select the optimal frequency offset [1,2]. In this work, we propose a fully automated image-based system for selecting the optimal frequency offset on FS images based on machine learning. Methods The proposed prototype system consists of four main steps (Fig.1). First, a pre-trained deep-learning-based whole heart segmentation network is applied on a four chamber-view FS image to localize the ROI where artifacts should be reduced. Second, high frequency components within the ROI (for each frequency offset in the FS series) are extracted by successive processing of Fourier transformation, high-pass filtering, inverse Fourier transformation and subtraction over series. and N images with the lowest high-frequency content are selected. Third, an adaptive weighting map for each FS image is generated which penalizes signal deviations from a pixel-wise median that is calculated based on the selected images [3]. By averaging the maps and selecting the frame with maximum percentage, the optimal frequency offset is selected. A total of 38 datasets, acquired on multiple clinical 3T MRI scanners (MAGNETOM Skyra, Vida, Prisma, Lumina; Siemens Healthcare, Erlangen, Germany), were used to evaluate the proposed system. All FS series were annotated manually and used to compare with the system output. The experts were allowed to select multiple possible optimal FS images within a FS series. In case of multiple annotations, the system output was labelled as correct when it selected one of the offsets chosen by the expert. Further, the generated weighting maps were visually evaluated. Results The proposed system achieved an accuracy of 92.1% compared to experts’ ground truth annotations. From the failed cases (n=3), the maximum difference was off by 2 frames. Based on the generated weighting maps, a reasonable decision on the selection of the optimal frequency offset is made. The algorithm successfully selects an FS image with minimized banding and flow artifacts within the ROI (Fig. 2a). Further, it reveals that the generated weighting map correctly suppress areas containing artifacts (Fig. 2b). Conclusions Initial results demonstrate the feasibility of the proposed system to automatically select the optimal frequency offset on FS scans. Therefore, it can improve the automation of a cardiac MRI workflow. An example of the result of each step

Adaptive step size LMS improves ECG detection during MRI at 1.5 and 3 T

Independent component analysis-based artefact reduction: application to the electrocardiogram for improved magnetic resonance imaging triggering

ECG Signal Preprocessing Based on Change Step Iteration of the LMS Adaptive Filtering Algorithm

A 1.5T MRI-conditional 12-lead electrocardiogram for MRI and intra-MR intervention

Reconstruction of the 12-lead ECG using a novel MR-compatible ECG sensor network

Real-time ballistocardiographic artifact reduction using the k-teager energy operator detector and multi-channel referenced adaptive noise cancelling.

Robust QRS Detection Using High-Resolution Wavelet Packet Decomposition and Time-Attention Convolutional Neural Network

An Adaptive QRS Detection Algorithm for Ultra-Long-Term ECG Recordings

Higher-Order Ambulatory Electrocardiogram Identification And Motion Artifact Suppression With Adaptive Second- And Third-Order Volterra Filters

Artifact Reduction for Simultaneous EEG/fMRI Recording: Adaptive FIR Reduction of Imaging Artifacts

Evaluation of 12-lead electrocardiogram at 0.55T for improved cardiac monitoring in magnetic resonance imaging

Adaptive Electrocardiogram Enhancement in Strong Noise Environment

An Impulsive Noise Rejection Filter for Wearable ECG Signal Processing

Application of an EMG interference filtering method to dynamic ECGs based on an adaptive wavelet-Wiener filter and adaptive moving average filter

A Generalisable Heartbeat Classifier Leveraging Self-Supervised Learning for ECG Analysis During Magnetic Resonance Imaging

Improving QRS detection for artifacts reduction

Kalman Filter Based Electromyographic Signal Suppression of Real-Time ECG Signal

Fully automated machine learning-based selection of optimal bSSFP frequency offset for artifact reduction in cardiac MRI

DeepFilter: An ECG baseline wander removal filter using deep learning techniques

An Efficient ECG Baseline Removal Filter Based on Frequency Response Masking Technique for Wearable Applications

Patient-independent, MHD-robust R-peak detection for retrospective gating in cardiac MRI imaging