Abstract:Fractures of the distal section of the radius (Colles' fractures) occur earlier in life than other osteoporotic fractures. Therefore, they can be interpreted as a warning signal for later, more deleterious fractures of vertebral bodies or the femoral neck. In the past decade, the advent of HR-pQCT allowed a detailed architectural analysis of the distal radius and an automated but time-consuming estimation of its strength with linear micro-finite element (μFE) analysis. Recently, a second generation of HR-pQCT scanner (XtremeCT II, SCANCO Medical, Switzerland) with a resolution beyond 61 μm became available for even more refined biomechanical investigations in vivo. This raises the question how biomechanical outcome variables compare between the original (LR) and the new (HR) scanner resolution. Accordingly, the aim of this work was to validate experimentally a patient-specific homogenized finite element (hFE) analysis of the distal section of the human radius for the fast prediction of Colles' fracture load based on the last generation HR-pQCT. Fourteen pairs of fresh frozen forearms (mean age = 77.5±9) were scanned intact using the high (61 μm) and the low (82 μm) resolution protocols that correspond to the new and original HR-pQCT systems. From each forearm, the 20mm most distal section of the radius were dissected out, scanned with μCT at 16.4 μm and tested experimentally under compression up to failure for assessment of stiffness and ultimate load. Linear and nonlinear hFE models together with linear micro finite element (μFE) models were then generated based on the μCT and HR-pQCT reconstructions to predict the aforementioned mechanical properties of 24 sections. Precision errors of the short term reproducibility of the FE analyses were measured based on the repeated scans of 12 sections. The calculated failure loads correlated strongly with those measured in the experiments: accounting for donor as a random factor, the nonlinear hFE provided a marginal coefficient of determination (Rm2) of 0.957 for the high resolution (HR) and 0.948 for the low resolution (LR) protocols, the linear hFE with Rm2 of 0.957 for the HR and 0.947 for the LR protocols. Linear μFE predictions of the ultimate load were similar with an Rm2 of 0.950 for the HR and 0.954 for the LR protocols, respectively. Nonlinear hFE strength computation led to precision errors of 2.2 and 2.3% which were higher than the ones calculated based on the linear hFE (1.6 and 1.9%) and linear μFE (1.2 and 1.6%) for the HR and LR protocols respectively. Computation of the fracture load with nonlinear hFE demanded in average 6h of CPU time which was 3 times faster than with linear μFE, while computation with linear hFE took only a few minutes. This study delivers an extensive experimental and numerical validation for the application of an accurate and fast hFE diagnostic tool to help in identifying individuals who may be at risk of an osteoporotic wrist fracture and to follow up pharmacological and other treatments in such patients.

Predicting fracture in the proximal humerus using phase field models

Fast estimation of Colles' fracture load of the distal section of the radius by homogenized finite element analysis based on HR-pQCT

Fracture prediction for the proximal femur using finite element models: Part I--Linear analysis

Phase-field approach for fracture prediction of brittle cracked components

Femoral fracture load and damage localisation pattern prediction based on a quasi-brittle law : linear and non-linear FE meshing

Fracture prediction for the proximal femur using finite element models: Part II--Nonlinear analysis

A Coupling Method Between Phase Field Model and Classical Linear Elastic Theory Model for Static and Dynamic Fracture

Analysis and Validation of a 3D Finite Element Model for Human Forearm Fracture

Morphology and novel classification of proximal humeral fractures

Mixed Displacement-Pressure-phase Field Framework for Finite Strain Fracture of Nearly Incompressible Hyperelastic Materials

Uncertainty quantification for personalized analyses of human proximal femurs

How accurately do finite element models predict the fall impact response of ex vivo specimens augmented by prophylactic intramedullary nailing?

A hybrid adaptive finite element phase‐field method for quasi‐static and dynamic brittle fracture

The Applications Of Finite Element Analysis In Proximal Humeral Fractures

Phase Field Modeling of Brittle Fracture Based on the Cell-Based Smooth FEM by Considering Spectral Decomposition

Rate-dependent phase field fracture simulation in polymers with adaptive mixed isogeometric approach

Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation

Higher-order Phase Field Fracture Simulation in Nearly Incompressible Viscoelasticity

Predicting experimentally-derived failure load at the distal radius using finite element modelling based on peripheral quantitative computed tomography cross-sections (pQCT-FE): A validation study

A smoothed particle hydrodynamics approach for phase field modeling of brittle fracture

A modified phase field model for predicting the fracture behavior of quasi‐brittle materials