Abstract:A hydrophilic membrane commonly performs better in resisting fouling. But most prevailing polymeric membrane materials are hydrophobic thus prone to be fouled in practical operations. The current study presents a facile strategy for the fabrication of superhydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes on the basis of a blending method and a dip-coating technique. A carboxyl-rich substance was firstly blended as an additive in the PVDF membrane matrix during fabrication. The incorporated carboxyl groups acted as anchor sites for the subsequent binding of amine-grafted silica nanoparticles (NPs). After a simple dip-coating operation, the PVDF membrane would be covalently functionalized to be superhydrophilic. Three types of carboxyl-rich additives including poly(methacrylic acid sodium salt), sodium alginate, and ethylenediaminetetraacetic acid (EDTA) were separately used to prepare different primary membranes for respective functionalization operations. The resultant membranes were systematically characterized in terms of hydrophilicity, morphology, permeability, and antifouling performance. Consequently, the simple dip-coating functionalization dramatically enhanced the surface hydrophilicity of all the additive-blended PVDF membranes. All the functionalized membranes obtained a significantly lower initial contact angle, which instantly reduced to < 5 degrees within several seconds. This could be attributed to the hydrophilic chains grafted on the NPs and the proper micro-/nano topography offered by the stack of NPs. Particularly, the EDTA-blended membranes achieved a higher and more stable hydrophilicity. Also, all the functionalized membranes obtained higher water permeabilities as compared with the pristine membrane. Moreover, all the superhydrophilic membranes restored over 80% flux (much higher than the similar to 53% for the pristine membrane) after cleaning in the fouling tests, demonstrating dramatically enhanced antifouling capacity.

Robust Fluorine-Free Superhydrophobic Amino-Silicone Oil/SiO2 Modification of Electrospun Polyacrylonitrile Membranes for Waterproof-Breathable Application

Synthesis of superamphiphobic breathable membranes utilizing SiO2 nanoparticles decorated fluorinated polyurethane nanofibers

In-situ grown SiO 2 on amino-silane modified polyacrylonitrile nanofibrous membranes and its waterproof-breathable and light-shielding properties

UV-assisted stabilization of superhydrophobic nanofibrous membranes for waterproof, breathable and thermal insulation applications

Fluorine-Free Hydrophobic Modification and Waterproof Breathable Properties of Electrospun Polyacrylonitrile Nanofibrous Membranes

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Biomimetic and Durably Superhydrophobic Nanofibrous Membranes for High‐Performance Waterproof and Breathable Textiles

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Fabrication of Waterborne Silicone-Modified Polyurethane Nanofibers for Nonfluorine Elastic Waterproof and Breathable Membranes

High-performance fluorine-free waterproof and breathable electrospun nanofibrous membranes by thermally induced coating-crosslinking

Superhydrophobic polyvinylidene fluoride nanofibrous membranes with stable hierarchical structures for protective textiles

Superhydrophobic and breathable SiO2/polyurethane porous membrane for durable water repellent application and oil-water separation

Fluorine-Free, Highly Durable Waterproof and Breathable Fibrous Membrane with Self-Clean Performance

Waterborne electrospinning of fluorine-free stretchable nanofiber membranes with waterproof and breathable capabilities for protective textiles

Superhydrophobized Polyacrylonitrile/Hierarchicall-FeOOH Nanofibrous Membrane for High-salinity Water Treatment in Membrane Distillation

A Facile Approach to Fabrication of Superhydrophilic Ultrafiltration Membranes with Surface-Tailored Nanoparticles

Nature-Inspired Fluorine-Free Robust Superhydrophobic Fabrics

Preparation of superhydrophobic coatings with excellent mechanical and chemical stability by one-step spraying method with selected fluorine-free modifiers

Robust superwetting polytetrafluoroethylene membranes with interlayer-bridged inorganic nanocoating for efficient oil/water separation

Wetting-induced superlyophobic polyacrylonitrile membranes: from reversible wettability to switchable on-demand emulsion separation