Controlling eutrophication by combined bloom precipitation and sediment phosphorus inactivation.

M. Lürling,Frank van Oosterhout

DOI: https://doi.org/10.1016/j.watres.2013.08.019

IF: 12.8

2013-11-01

Water Research

Abstract:

What problem does this paper attempt to address?

Production of Curdlan by Agrobacterium sp. DH-2 Using Sugarcane Molasses-Based Medium

Yanan Li,Jie Wan,Hongliang Gao,Xuexia Yang

DOI: https://doi.org/10.1007/s10924-023-02901-2

IF: 4.705

2023-05-10

Journal of Polymers and the Environment

Abstract:Curdlan is an extracellular polysaccharide produced by microorganisms with various applications in the food and biomedical fields. In order to reduce the cost of producing curdlan, the production of curdlan by Agrobacterium sp. DH-2 using sugarcane molasses as a carbon source was investigated. Pretreatment of sugarcane molasses reduced the metal content and resulted in an increase in curdlan production compared to untreated molasses. The composition of the medium based on pretreated molasses was optimized for curdlan production. The addition of (NH4)2HPO4 was found to be effective in increasing curdlan production, while the addition of corn steep liquor, CaCO3, KH2PO4, and MgSO4 did not have a significant effect. An orthogonal design was used to optimize the amount of (NH4)2HPO4 added and the sugar concentration of pretreated molasses. Maximum curdlan production of 13.0 g/L was obtained in the optimized medium, which contained a sugar concentration of 60 g/L of pretreated molasses and 1.0 g/L of (NH4)2HPO4. The curdlan produced in the molasses-based medium had an average molecular weight of 0.49 × 106 Da. FT-IR spectra and TGA thermal analysis showed that there were no significant differences between the curdlan produced and commercial curdlan. These results suggested that pretreated sugarcane molasses supplemented with (NH4)2HPO4 as a nitrogen resource could be used for economical production of curdlan.

engineering, environmental,polymer science
Optimizing Curdlan Synthesis: Engineering Agrobacterium tumefaciens ATCC31749 for Enhanced Production Using Dextrin as a Carbon Source

Tingting Yu,Yu Wang,Wei Wang,Yonggang Zhang,Yanmin Zhang,Hongyu Han,Yang Liu,Siduo Zhou,Xueqian Dong

DOI: https://doi.org/10.3390/fermentation10050240

2024-04-30

Fermentation

Abstract:A key goal in current research on industrial curdlan production is the expansion of carbon sources for fermentation. In this study, a recombinant bacterial strain, sp-AmyAXCC, capable of fermenting and synthesizing curdlan using dextrin as a carbon source, was produced via heterologous expression of IPTG-inducible α-amylase from Xanthomonas campestris NRRL B-1459 in Agrobacterium tumefaciens ATCC31749. External expression of the enzyme was confirmed by western blotting, and the expression levels of exogenous proteins during the fermentation process were monitored. Additionally, the properties of the curdlan product were characterized using attenuated total reflectance-Fourier transform infrared spectroscopy and X-ray diffraction. The recombinant strain produced curdlan at a titer of 30.40 ± 0.14 g/L, gel strength of 703.5 ± 34.2 g/cm2, and a molecular weight of 3.58 × 106 Da, which is 33% greater than the molecular weight of native curdlan (2.69 × 106 Da). In the batch fermentation of sp-AmyAXCC with 12% dextrin as a carbon source, the titer of curdlan was 66.7 g/L with a yield of 0.56 g/g, and a productivity rate of 0.62 g/L/h at 108 h. The results of this study expand the substrate spectrum for Agrobacterium fermentation in curdlan production and provides guidance for further industrialization of curdlan production.

biotechnology & applied microbiology
Curdlan production from cassava starch hydrolysates by Agrobacterium sp. DH-2

Jie Wan,Zhiyu Shao,Deming Jiang,Hongliang Gao,Xuexia Yang

DOI: https://doi.org/10.1007/s00449-022-02718-8

IF: 3.434

2022-03-21

Bioprocess and Biosystems Engineering

Abstract:Curdlan is an edible microbial polysaccharide and can be used in food, biomedical and biomaterial fields. To reduce the cost of curdlan production, this study investigated the suitability of cassava starch hydrolysates as carbon source for curdlan production. Cassava starch was hydrolyzed into maltose syrup using β-amylase and pullulanase at various enzyme dosages, temperature, time and addition order of two enzymes. The maltose yield of 53.17% was achieved at starch loading 30% by simultaneous addition β-amylase 210 U/g starch and pullulanase 3 U/g starch at 60 °C for 9 h. Cassava starch hydrolysates were used as carbon source for curdlan production by Agrobacterium sp. DH-2. The curdlan production reached 28.4 g/L with the yield of 0.79 g/g consumed sugar and molecular weight of 1.26 × 106 Da at 96 h with cassava starch hydrolysate at 90 g/L initial sugar concentration. Curdlan produced from cassava starch hydrolysates was characterized using FT-IR spectra and thermo gravimetric analysis. This work indicated that cassava starch was a potential renewable feedstock for curdlan production.

engineering, chemical,biotechnology & applied microbiology
Characterization and improvement of curdlan produced by a high-yield mutant of Agrobacterium sp. ATCC 31749 based on whole-genome analysis

Hongliang Gao,Fangrui Xie,Wei Zhang,Jiangtao Tian,Chunjing Zou,Caifeng Jia,Mingfei Jin,Jing Huang,Zhongyi Chang,Xuexia Yang,Deming Jiang

DOI: https://doi.org/10.1016/j.carbpol.2020.116486

2020-10-01

Abstract:Curdlan is a bacterial, water-insoluble, linear homopolysaccharide that has been widely used in the food industry. In this study, genome information of strain CGMCC 11546, a UV-induced high-yield mutant of the model curdlan-producing strain Agrobacterium sp. ATCC 31749, was used to investigate the molecular mechanism of curdlan biosynthesis. The maximum curdlan yield of 47.97 ± 0.57 g/L was obtained from strain CGMCC 11546 by using optimal media containing 60 g/L sucrose, 6 g/L yeast, 2 g/L KH2PO4, 0.4 g/L MgSO4·7H2O, 2 g/L CaCO3, 0.1 g/L FeSO4·7H2O, 0.04 g/L MnSO4, and 0.02 g/L ZnCl2 at 30 °C and 280 rpm after 96 h of fermentation. The gel strength of curdlan was improved by 41 % by knocking out the β-1,3-glucanase genes exoK and exsH of strain CGMCC 11546. Furthermore, the application of curdlan from the ΔexoK-exsH strain in noodles significantly improved the eating quality of both raw and cooked noodles.
Production of the Polysaccharide Curdlan by Agrobacterium species on Processing Coproducts and Plant Lignocellulosic Hydrolysates

Thomas P. West

DOI: https://doi.org/10.3390/fermentation6010016

2020-01-24

Fermentation

Abstract:This review examines the production of the biopolymer curdlan, synthesized by Agrobacterium species (sp.), on processing coproducts and plant lignocellulosic hydrolysates. Curdlan is a β-(1→3)-D-glucan that has various food, non-food and biomedical applications. A number of carbon sources support bacterial curdlan production upon depletion of nitrogen in the culture medium. The influence of culture medium pH is critical to the synthesis of curdlan. The biosynthesis of the β-(1→3)-D-glucan is likely controlled by a regulatory protein that controls the genes involved in the bacterial production of curdlan. Curdlan overproducer mutant strains have been isolated from Agrobacterium sp. ATCC 31749 and ATCC 31750 by chemical mutagenesis and different selection procedures. Several processing coproducts of crops have been utilized to support the production of curdlan. Of the processing coproducts investigated, cassava starch waste hydrolysate as a carbon source or wheat bran as a nitrogen source supported the highest curdlan production by ATCC 31749 grown at 30 °C. To a lesser extent, plant biomass hydrolysates have been explored as possible substrates for curdlan production by ATCC 31749. Prairie cordgrass hydrolysates have been shown to support curdlan production by ATCC 31749 although a curdlan overproducer mutant strain, derived from ATCC 31749, was shown to support nearly double the level of ATCC 31749 curdlan production under the same growth conditions.
Optimization of curdlan production and ultrasound assisted extraction processes from Priestia megaterium

Natasha Aquinas,Bhat M. Ramananda,Subbalaxmi Selvaraj

DOI: https://doi.org/10.1038/s41598-024-77880-y

IF: 4.6

2024-11-06

Scientific Reports

Abstract:In this study, the upstream and downstream production processes of curdlan from Priestia megaterium were optimized to enhance its yield. Additionally, a novel extraction method was developed for curdlan recovery. Optimization studies were conducted using Central composite design (CCD). Curdlan yield improved from 0.15 g/L (unoptimized) to 0.46 g/L (3-fold increase) when fermentation was carried out in CCD-optimized media of (w/v) sucrose 20%, urea 0.1%, KH 2 PO 4 0.02%, agitation speed 250 rpm. To further enhance curdlan yield during extraction, ultrasonication was incorporated as a novel step into the conventional method of acid/alkali-assisted curdlan recovery. A two-step optimization was chosen for extraction, namely, one-factor-at-a-time (OFAT) and CCD, wherein the optimized extraction parameters were determined to be 25 s sonication, 1 N NaOH, and 2 h solubilization time. The curdlan yield improved by 1.5-fold (0.70 g/L) post optimization, in comparison with unoptimized conventional extraction step. Finally, the biopolymer was validated through characterization by nuclear magnetic resonance (NMR) which showed characteristic curdlan spectra in the 13 C and 1 H NMR studies. To the best of our knowledge, this study represents the first documented report on curdlan extraction using this novel method of ultrasonication.

multidisciplinary sciences
Submerged Fermentation and Kinetics of Newly Isolated Priestia megaterium for the Production of Biopolymer Curdlan

Bhat, Ramananda M.,Selvaraj, Subbalaxmi

DOI: https://doi.org/10.1007/s10924-024-03224-6

IF: 4.705

2024-04-23

Journal of Polymers and the Environment

Abstract:In this study, a curdlan-producing bacterium was isolated from Cow pea soil and identified as Priestia megaterium based on 16 S rRNA sequencing. To identify the most suitable carbon and nitrogen sources for curdlan production, submerged fermentation studies with different sources was carried out. To enhance the curdlan yield, optimization by one-factor-at-a-time approach was conducted. The optimal fermentation media consisted of 15% (w/v) sucrose, 0.1% (w/v) urea, 0.1% (w/v) KH 2 PO 4 , 0.04% (w/v) MgSO 4 ·7H 2 O, trace elements, initial pH of 7.0 with 10% (v/v) inoculum size and agitation speed of 180 rpm. Kinetics of growth, curdlan yield, sucrose and ammonia depletion were studied for a period of 168 h. Maximum curdlan yield (0.31 g/L) was achieved at 96 h of fermentation. At this point, the fermentation media had an optical density of 9.68, biomass concentration of 4.26 mg/mL, and viable count of 2.4 × 10 4 CFU/mL. Additionally, the maximum percentage consumption of sucrose and ammonia over 168 h of fermentation were 75 and 62.5%, respectively. Finally, the identity of biopolymer curdlan was validated through characterization techniques such as Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and Thermogravimetric analysis (TGA). Some characteristic features of curdlan such as the β-1,3-linkage was depicted by the absorption band at 890 cm −1 in FTIR, flaky granules with irregularities as seen in SEM, and thermal degradation between 235 and 350 °C by TGA. To the best of our knowledge, this is the first report on curdlan production from Priestia megaterium.

engineering, environmental,polymer science
Correction To: Anthocyanin Extract from Lycium Ruthenicum Enhanced Production of Biomass and Polysaccharides During Submerged Fermentation of Agaricus Bitorquis (quél.) Sacc. Chaidam

Shan Wu,Hong-Yun Lu,Qi-He Chen,Hui-Chun Xie,Ying-Chun Jiao

DOI: https://doi.org/10.1007/s00449-021-02605-8

IF: 3.434

2021-01-01

Bioprocess and Biosystems Engineering

Abstract:Agaricus bitorquis (Quel.) Sacc. Chaidam (ABSC) is a wild edible fungus uniquely found in the Tibet Plateau. ABSC is rich in polysaccharides that are considered biologically active. This study aimed to determine the feasibility of enhancing exopolysaccharide (EPS) production by ABSC in shake flask culture by supplementing the fermentation medium with anthocyanin extract. Different concentrations of Lycium ruthenicum Murr. (LRM) anthocyanin crude extract were tested on ABSC fermentation. The activity of phosphoglucose isomerase (PGI), phosphoglucose mutase (PGM), and phosphomannose isomerase (PMI), enzymes presumably involved in EPS synthesis by ABSC, was determined. ABSC transcriptomic profile in response to the presence of anthocyanins during fermentation was also investigated. LRM anthocyanin crude extract (0.06 mg/mL) was most effective in increasing EPS content and mycelial biomass (by 208.10% and 105.30%, respectively, P < 0.01). The activity of PGI, PGM, and PMI was increased in a medium where LRM anthocyanin extract and its main components (proanthocyanidins and petunia anthocyanin) were added. RNA-Seq analysis showed that 349 genes of ABSC were differentially expressed during fermentation in the medium containing anthocyanin extract of LRM; 93 genes were up-regulated and 256 genes down-regulated. From gene ontology enrichment analysis, differentially expressed genes were mostly assigned to carbohydrate metabolism and signal transduction categories. Collectively, LRM anthocyanins extract positively affected EPS production and mycelial biomass during ABSC fermentation. Our study provides a novel strategy for improving EPS production and mycelial growth during ABSC liquid submerged fermentation.
Enhanced Citric Acid Production through Aspergillus niger: Insights from Fermentation Studies Using Sugarcane Molasses

Samina Khurshid,Hamad Ashraf,Tanveer Hussain,Muhammad Iqbal,Huma Qureshi,Tauseef Anwar,Saleh H. Salmen,Mohammad Javed Ansari

DOI: https://doi.org/10.3390/life14060756

2024-06-14

Life

Abstract:The production of citric acid, a vital agricultural commodity utilized across various industries such as food, beverages, pharmaceuticals, agriculture, detergents, and cosmetics, predominantly relies on microbial fermentation, with Aspergillus niger accounting for approximately 90% of global production. In this study, we aimed to optimize the key factors influencing citric acid production, with a focus on strains, fermentation techniques, and carbon sources, particularly sugarcane molasses. A. niger, sourced from the Botany department/Biotechnology laboratories at Govt. College of Science, Lahore, was employed for citric acid production. The process involved inoculum preparation through spore collection from 3 to 5 days of cultured PDA slants. The fermentation medium, comprising cane molasses with a 15% sugar concentration, was meticulously prepared and optimized for various factors, including magnesium sulfate, potassium ferrocyanide, time of addition of potassium ferrocyanide, ammonium oxalate, and calcium chloride. Our optimization results shed light on the significant impact of different factors on citric acid production. For instance, the addition of 0.4 g/L magnesium sulfate led to a maximum yield of 75%, while 2 g/L potassium ferrocyanide, added at 24 h, achieved a yield of 78%. Remarkably, ammonium oxalate, at a concentration of 10 g/L, resulted in a notable 77% yield. Conversely, the addition of calcium chloride exhibited negligible effects on citric acid production, with the control group yielding more at 78%. Our study underscores the potential for optimizing factors to enhance citric acid production by A. niger in submerged fermentation. These findings highlight the pivotal role of magnesium sulfate, potassium ferrocyanide, and ammonium oxalate in augmenting citric acid yields while emphasizing the minimal impact of calcium chloride. Ultimately, these insights contribute to advancing our understanding of microbial citric acid biosynthesis, providing valuable implications for industrial applications and future research endeavors.

biology
Effective production of biologically active water-soluble β-1,3-glucan by a coupled system of Agrobacterium sp. and Trichoderma harzianum

Ying Liang,Li Zhu,Minjie Gao,Jianrong Wu,Xiaobei Zhan

DOI: https://doi.org/10.1080/10826068.2018.1452259

2018-04-30

Abstract:Water-soluble β-1,3-glucan (w-glucan) prepared from curdlan is reported to possess various bioactive and medicinal properties. To develop an efficient and cost-effective microbial fermentation method for the direct production of w-glucan, a coupled fermentation system of Agrobacterium sp. and Trichoderma harzianum (CFS-AT) was established. The effects of Tween-80, glucose flow rate, and the use of a dissolved oxygen (DO) control strategy on w-glucan production were assessed. The addition of 10 g L-1 Tween-80 to the CFS-AT enhanced w-glucan production, presumably by loosening the curdlan ultrastructure and increasing the efficiency of curdlan hydrolysis. A two-stage glucose and DO control strategy was optimal for w-glucan production. At the T. harzianum cell growth stage, the optimal glucose flow rate and agitation speed were 2.0 g L-1 hr-1 and 600 rpm, respectively, and at the w-glucan production stage, they were 0.5 g L-1 hr-1 and 400 rpm, respectively. W-glucan production reached 17.31 g L-1, with a degree of polymerization of 19-25. Furthermore, w-glucan at high concentrations exhibited anti-tumor activity against MCF-7, HepG2, and Hela cancer cells in vitro. This study provides a novel, cost-effective, eco-friendly, and efficient microbial fermentation method for the direct production of biologically active w-glucan.

biotechnology & applied microbiology,biochemical research methods,biochemistry & molecular biology
Fine regulation of the starch liquefaction process and its application in the production of citric acid

Baoshi Wang,Bin Wang,Fengling Tan,Hua Li,Mingxia Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2020.08.085

IF: 8.2

2020-12-01

International Journal of Biological Macromolecules

Abstract:Citric acid (CA), generally fermented from the starchy material, has attracted intense attention because of its wide applications in many aspects. However, the traditional starchy-liquefaction process based on the dextrose equivalent value and iodine-testing method is inappropriate as it hinders the subsequent CA fermentations. Here, a novel method of evaluating the starch liquefaction in the CA production process was established. Firstly, dextrin samples with the molecular weight (Mw) narrow distribution were prepared by alcohol fractional precipitation. Glucoamylase (GM) from the culture of CA-producing strain Aspergillus niger was purified. Then, the structure-activity relationship between the dextrin and GM was analyzed. Results demonstrated that the Mw of liquefied components aggregated in the range of 1.4–1.9 kDa could improve the efficiency of simultaneous saccharification and fermentation process. CA production rate and total sugar uptake rate were evidently improved with residual total sugar decreasing by 10.8% and fermentation efficiency enhanced by 21.1% in 9 h shorter fermentation time. All these results confirmed that fine regulation of the starch liquefaction based on the Mw characteristics was feasible and effective to improve the CA fermentation. Our proposed strategy could also be useful for other fermentations and sugar industry involving the starchy material.

polymer science,biochemistry & molecular biology,chemistry, applied
Actual and Simulated Injury of Creontiades signatus (Heteroptera: Miridae) Feeding on Cotton Bolls

J. S. Armstrong,R. Coleman,B. Duggan

DOI: https://doi.org/10.18474/0749-8004-45.2.170

2010-04-01

Abstract:The actual feeding injury of Creontiades signatus Distant (Heteroptera: Miridae) was compared with a simulated technique during 2005, 2006 and 2008 by injecting varying dilutions of pectinase into cotton bolls at different boll sizes (ages) and into 2 or 4 locules to determine if such a technique could be used to reduce the time and labor involved with conducting economic injury level studies in the field. The most accurate simulation occurred in 2008 by injecting 1 μL of 10% pectinase into all 4 locules of a cotton boll. This improved the relationships of injury score to seed cotton, seed, and lint weights. The youngest boll age class of ≥ 2 cm diam. (2 d of age) was not significantly more damaged than the medium age ≥ 2.5 cm (8 d of age) bolls, and both sustained significantly more injury than the large boll classification of ≥ 3 cm (12 d of age). However, small bolls were at least 3 times more likely to abscise than medium-sized bolls, and large bolls did not abscise regardless of treatment. Some damage was observed for large bolls from the injected and actual feeding compared with the controls, but the lint and seed weights were not significantly different for any of the treatments including the controls. Our study characterizes the feeding injury caused by C. signatus and describes a simulated technique that may be used to further economic injury studies.
Agenesis of dorsal pancreas in a patient with weight loss and diabetes mellitus

Walter A. Klein,M. Dabezies,A. Friedman,D. Caroline,G. Boden,Sidney R. Cohen

DOI: https://doi.org/10.1007/BF02087781

1994-08-01

Digestive Diseases and Sciences

Abstract:
Microchannel cooling of traveling-wave-tube circuit for ultrawideband high-power submillimeter-wave generation

Yanbao Ma,A. Bhunia,M. Field,Chung-Lung Chen

DOI: https://doi.org/10.1109/NEMS.2010.5592436

2010-09-30

Abstract:High heat dissipation is generated in Traveling-wave-tube circuit for ultrawideband high-power submillimeter-wave generation due to e-beam power loss during transport. Active cooling is required to ensure the device can physically handle the high heat flux without damage. An efficient thermal management solution is provided for cooling the high-power vacuum device based on microchannel technology. A thermal conduction model is developed in Ansys Workbench® to calculate thermal resistance in the vacuum device while a conjugated thermal conduction and convection model is developed in Fluent for the design of microchannel heat sink. The performance of microchannel heat sink is investigated to ensure a safe operational condition (maximum temperatures 250 °C) for the high-power vacuum device with 95% e-beam transport efficiency.
The gain effect of microbial consortia induced by adaptive domestication for efficient conversion of Chinese cabbage waste by anaerobic fermentation

Dongbo Ma,Jiawei Li,Jingkai Liu,Ruixue Wang,Qingwei Meng,Jianping Li,Sujiang Zhang,Anshan Shan

DOI: https://doi.org/10.1016/j.scitotenv.2024.171313

IF: 9.8

2024-03-02

The Science of The Total Environment

Abstract:The resource-based treatment of Chinese cabbage waste by anaerobic fermentation can effectively mitigate air, soil, and groundwater pollution. However, the compatibility between fermentative microorganisms and the environment might be a crucial limiting factor for the resource recycling of Chinese cabbage waste. Therefore, the gain effect of microbial consortia (JMRS, JMRST, JMRSZ, JCCW, JCCWT and JCCWZ) induced by adaptive domestication for efficient conversion of Chinese cabbage waste by anaerobic fermentation were explored in this study. A total of 42 single subsamples with same weights were randomly divided into seven treatments: sterile deionized water (Control); anaerobic fermentation inoculated with JMRS (MRS); anaerobic fermentation inoculated with JMRST (MRST); anaerobic fermentation inoculated with JMRSZ (MRSZ); anaerobic fermentation inoculated with JCCW (CCW); anaerobic fermentation inoculated with JCCWT (CCWT); anaerobic fermentation inoculated with JCCWZ (CCWZ) and samples were taken on days 30 and 60 after anaerobic fermentation. The results exhibited that all the treatments contributed to high levels of lactic acid (178.77–201.79 g/kg dry matter) and low levels of ammonia-N (12.99–21.03 g/kg total nitrogen). Meanwhile, MRSZ enhanced ( p < 0.05) acetic acid levels (1.53 g/kg dry matter) and resulted in the lowest yeast counts. Microbiologically, the addition of microbial consortia decreased the linear discriminant analysis (LDA) scores of Massilia and Stenotrophomonas maltophilia . Moreover, MRSZ enriched ( p < 0.05) Lactobacillus hilgardii , and decreased ( p < 0.05) the abundance of bacteria containing mobile elements and potentially pathogenic bacteria. In conclusion, JMRSZ improved the efficient conversion of Chinese cabbage waste for resource utilization.

environmental sciences
Morphological regulation of Aspergillus niger to improve citric acid production by chsC gene silencing

Xiaowen Sun,Hefang Wu,Genhai Zhao,Zhemin Li,Xihua Wu,Hui Liu,Zhiming Zheng

DOI: https://doi.org/10.1007/s00449-018-1932-1

IF: 3.434

2018-04-02

Bioprocess and Biosystems Engineering

Abstract:The mycelial morphology of Aspergillus niger, a major filamentous fungus used for citric acid production, is important for citric acid synthesis during submerged fermentation. To investigate the involvement of the chitin synthase gene, chsC, in morphogenesis and citric acid production in A. niger, an RNAi system was constructed to silence chsC and the morphological mutants were screened after transformation. The compactness of the mycelial pellets was obviously reduced in the morphological mutants, with lower proportion of dispersed mycelia. These morphological changes have caused a decrease in viscosity and subsequent improvement in oxygen and mass transfer efficiency, which may be conducive for citric acid accumulation. All the transformants exhibited improvements in citric acid production; in particular, chsC-3 showed 42.6% higher production than the original strain in the shake flask. Moreover, the high-yield strain chsC-3 exhibited excellent citric acid production potential in the scale-up process.The citric acid yield and the conversion rate of glucose of chsC-3 were both improved by 3.6%, when compared with that of the original strain in the stirred tank bioreactor.

engineering, chemical,biotechnology & applied microbiology
Direct lactic acid production from raw jerusalem artichoke powder by Lacticaseibacillus paracasei NJ and the comparative transcriptomic profiling of inulin and monosaccharide utilization

Yuyuan Cai,Yaohao Dun,Weiwei Dong,Qitong Chen,Yutian Lei,Jinlong Hu,Nan Peng,Shumiao Zhao

DOI: https://doi.org/10.1016/j.fbio.2024.104736

IF: 5.318

2024-10-01

Food Bioscience

Abstract:A feasible fermentation process for the production of lactic acid (LA), one of the most important food additives, from non-crop feedstocks would help alleviate the challenges of food safety. In this study, 215 g/L inulin-rich Jerusalem artichoke powder (JAP) were directly converted into LA without exogenous nitrogen addition under non-sterile conditions via selected Lacticaseibacillus paracasei NJ. The LA concentration, yield, and average productivity reached 144.08 g/L, 0.67 g/g, and 4.37 g/L/h, respectively, which can be scalable from 5 L to 50 L bioreactors. The viable counts of Lacticaseibacillus reached to 142.30–301.50 × 108 CFU/mL, allowing the products a promising probiotic in food additives. Transcriptional analysis revealed that strain NJ utilized inulin mainly via extracellular β-fructosidase and fructose transporters encoded by the fosRABCDXE operon, and the gene expression within the phosphoenolpyruvate (PEP)-dependent phosphotransferase system (PTS), pyruvate metabolism, and fatty acid synthesis was significantly altered. For strain NJ grown on JAP, the expressions of genes related to amino acid biosynthesis and peptide/amino acid relevant ATP-binding cassette (ABC) transport system were upregulated to fit nitrogen limitation. We found the availability of L. paracasei NJ for high-yield lactic acid from raw JAP and explores the inner changes of gene expression by utilizing inulin, which provide both promising food additives and new perspectives on the understanding of inulin metabolism in Lacticaseibacillus.

food science & technology
Embedding Inulin Fructotransferase from Arthrobacter Aurescens into Novel Curdlan-Based Mesoporous Silica Microspheres for Efficient Production of Difructose Anhydride III.

Xia Liu,Xianghui Qi,Song Zhu,Bo Jiang,Song Gao,Yifeng Zhang,Hongling Wang,Shumin Xu,Yifei Liu,Yingfeng An

DOI: https://doi.org/10.1016/j.foodchem.2019.125128

IF: 8.8

2019-01-01

Food Chemistry

Abstract:A novel strategy was used to produce inulin fructotransferase from Arthrobacter aurescens (Aa-IFTase) embedded in curdlan-based mesoporous silica microspheres (CMSiM-Aa-IFTase). The CMSiM-Aa-IFTase was constructed by co-entrapping cross-linked Aa-IFTase aggregates and curdlan into biomemitic silica, and the curdlan was subsequently removed by digestion with endo-β-1,3-glucanase. During this process, the curdlan served as an agent to introduce pores in silica microspheres. The resulting CMSiM-Aa-IFTase showed higher stability and activity than free Aa-IFTase and mCLEAs-Aa-IFTase (modified cross-linked enzyme aggregates with Aa-IFTase). Furthermore, the CMSiM-Aa-IFTase displayed good reusability and excellent storage stability. The excellent catalytic performances were due to the combinational structure from the cross-linked enzyme aggregates and hard shell of mesoporous silica microspheres, which might decrease the negative interaction between support and enzyme, and improve the mechanical properties. The CMSiM-Aa-IFTase was applicable for efficient production of Difructose Anhydride III (DFA III), and this approach should be highly valuable for preparing various mesoporous composites for catalysis.
Combination of Aspergillus niger MJ1 with Pseudomonas stutzeri DSM4166 or mutant Pseudomonas fluorescens CHA0-nif improved crop quality, soil properties, and microbial communities in barrier soil

Haiping Ni,Yuxia Wu,Rui Zong,Shiai Ren,Deng Pan,Lei Yu,Jianwei Li,Zhuling Qu,Qiyao Wang,Gengxing Zhao,Jianzhong Zhao,Lumin Liu,Tao Li,Youming Zhang,Qiang Tu

DOI: https://doi.org/10.3389/fmicb.2023.1064358

IF: 5.2

2023-02-02

Frontiers in Microbiology

Abstract:Soil salinization and acidification seriously damage soil health and restricts the sustainable development of planting. Excessive application of chemical fertilizer and other reasons will lead to soil acidification and salinization. This study focus on acid and salinized soil, investigated the effect of phosphate-solubilizing bacteria, Aspergillus niger MJ1 combined with nitrogen-fixing bacteria Pseudomonas stutzeri DSM4166 or mutant Pseudomonas fluorescens CHA0- nif on crop quality, soil physicochemical properties, and microbial communities. A total of 5 treatments were set: regular fertilization (T1), regular fertilization with MJ1 and DSM4166 (T2), regular fertilization with MJ1 and CHA0- nif (T3), 30%-reducing fertilization with MJ1 and DSM4166 (T4), and 30%-reducing fertilization with MJ1 and CHA0- nif (T5). It was found that the soil properties (OM, HN, TN, AP, AK, and SS) and crop quality of cucumber (yield production, protein, and vitamin C) and lettuce (yield production, vitamin C, nitrate, soluble protein, and crude fiber) showed a significant response to the inoculated strains. The combination of MJ1 with DSM4166 or CHA0- nif influenced the diversity and richness of bacterial community in the lettuce-grown soil. The organismal system-, cellular process-, and metabolism-correlated bacteria and saprophytic fungi were enriched, which were speculated to mediate the response to inoculated strains. pH, OM, HN, and TN were identified to be the major factors correlated with the soil microbial community. The inoculation of MJ1 with DSM4166 and CHA0- nif could meet the requirement of lettuce and cucumber growth after reducing fertilization in acid and salinized soil, which provides a novel candidate for the eco-friendly technique to meet the carbon-neutral topic.

microbiology
High-level production of pullulan and its biosynthesis regulation in Aureobasidium pullulans BL06

Shuyu Chen,Hongchen Zheng,Jiaqi Gao,Hui Song,Wenqin Bai

DOI: https://doi.org/10.3389/fbioe.2023.1131875

IF: 5.7

2023-01-27

Frontiers in Bioengineering and Biotechnology

Abstract:Pullulan has many potential applications in the food, pharmaceutical, cosmetic and environmental industries. However, the yield and molecular properties of pullulan produced by various strains still need to be promoted to fit the application needs. A novel yeast-like strain Aureobasidium pullulans BL06 producing high molecular weight (Mw) pullulan (3.3 × 10 6 Da) was isolated and identified in this study. The remarkable Mw of pullulan produced by A. pullulans BL06 was the highest level ever reported thus far. To further regulate the biosynthesis of pullulan in A. pullulans BL06, three gene knockout strains A. pullulans BL06 ΔPMAs, A. pullulans BL06 Δmel, and A. pullulans BL06 ΔPMAsΔmel, were constructed. The results showed that A. pullulans BL06 ΔPMAs could produce 140.2 g/L of moderate Mw (1.3 × 10 5 Da) pullulan after 120 h of fermentation. The highest yield level of pullulan to date could vastly reduce its production cost and expand its application scope and potential. The application experiments in food preservation showed that the moderate-Mw pullulan obtained in this work could reduce the weight loss of celery cabbages and mangos by 12.5% and 22%, respectively. Thus, the novel strains A. pullulans BL06 and A. pullulans BL06 ΔPMAs possessed unlimited development prospects in pullulan production at various Mw ranges and pullulan applications in multiple fields.

multidisciplinary sciences

Controlling eutrophication by combined bloom precipitation and sediment phosphorus inactivation.

Production of Curdlan by Agrobacterium sp. DH-2 Using Sugarcane Molasses-Based Medium

Optimizing Curdlan Synthesis: Engineering Agrobacterium tumefaciens ATCC31749 for Enhanced Production Using Dextrin as a Carbon Source

Curdlan production from cassava starch hydrolysates by Agrobacterium sp. DH-2

Characterization and improvement of curdlan produced by a high-yield mutant of Agrobacterium sp. ATCC 31749 based on whole-genome analysis

Production of the Polysaccharide Curdlan by Agrobacterium species on Processing Coproducts and Plant Lignocellulosic Hydrolysates

Optimization of curdlan production and ultrasound assisted extraction processes from Priestia megaterium

Submerged Fermentation and Kinetics of Newly Isolated Priestia megaterium for the Production of Biopolymer Curdlan

Correction To: Anthocyanin Extract from Lycium Ruthenicum Enhanced Production of Biomass and Polysaccharides During Submerged Fermentation of Agaricus Bitorquis (quél.) Sacc. Chaidam

Enhanced Citric Acid Production through Aspergillus niger: Insights from Fermentation Studies Using Sugarcane Molasses

Effective production of biologically active water-soluble β-1,3-glucan by a coupled system of Agrobacterium sp. and Trichoderma harzianum

Fine regulation of the starch liquefaction process and its application in the production of citric acid

Actual and Simulated Injury of Creontiades signatus (Heteroptera: Miridae) Feeding on Cotton Bolls

Agenesis of dorsal pancreas in a patient with weight loss and diabetes mellitus

Microchannel cooling of traveling-wave-tube circuit for ultrawideband high-power submillimeter-wave generation

The gain effect of microbial consortia induced by adaptive domestication for efficient conversion of Chinese cabbage waste by anaerobic fermentation

Morphological regulation of Aspergillus niger to improve citric acid production by chsC gene silencing

Direct lactic acid production from raw jerusalem artichoke powder by Lacticaseibacillus paracasei NJ and the comparative transcriptomic profiling of inulin and monosaccharide utilization

Embedding Inulin Fructotransferase from Arthrobacter Aurescens into Novel Curdlan-Based Mesoporous Silica Microspheres for Efficient Production of Difructose Anhydride III.

Combination of Aspergillus niger MJ1 with Pseudomonas stutzeri DSM4166 or mutant Pseudomonas fluorescens CHA0-nif improved crop quality, soil properties, and microbial communities in barrier soil

High-level production of pullulan and its biosynthesis regulation in Aureobasidium pullulans BL06