Validation and relevance of Rheumatoid Arthritis Pain Scale (RAPS) in Indian (Asian) patients suffering from rheumatoid arthritis

T. Kianifard,Taghi Kianyfard,A. Chopra

DOI: https://doi.org/10.1007/s10067-015-3071-2

Clinical Rheumatology

Abstract:

What problem does this paper attempt to address?

Optimization of a Natural Medium for Cellulase by a Marine Aspergillus Niger Using Response Surface Methodology

Dong-Sheng Xue,Hui-Yin Chen,Dong-Qiang Lin,Yi-Xin Guan,Shan-Jing Yao

DOI: https://doi.org/10.1007/s12010-012-9734-4

2012-01-01

Applied Biochemistry and Biotechnology

Abstract:The components of a natural medium were optimized to produce cellulase from a marine Aspergillus niger under solid state fermentation conditions by response surface methodology. Eichhornia crassipes and natural seawater were used as a major substrate and a source of mineral salts, respectively. Mineral salts of natural seawater could increase cellulase production. Raw corn cob and raw rice straw showed a significant positive effect on cellulase production. The optimum natural medium consisted of 76.9 % E. crassipes (w/w), 8.9 % raw corn cob (w/w), 3.5 % raw rice straw (w/w), 10.7 % raw wheat bran (w/w), and natural seawater (2.33 times the weight of the dry substrates). Incubation for 96 h in the natural medium increased the biomass to the maximum. The cellulase production was 17.80 U/g the dry weight of substrates after incubation for 144 h. The natural medium avoided supplying chemicals and pretreating substrates. It is promising for future practical fermentation of environment-friendly producing cellulase.
Screening and Identification of New Isolate: Thermostable Escherichia coli with Novel Thermoalkalotolerant Cellulases

Xing-hua Li,Roy Bhaskar,Hua-jun Yang,Dan Wang,Yun-gen Miao

DOI: https://doi.org/10.1007/s00284-009-9450-7

IF: 2.343

2009-01-01

Current Microbiology

Abstract:A cellulase-producing bacterium strain was isolated from soil that produced novel thermoalkalotolerant cellulases after growth on CMC-Na agar screening plate at 37°C. It was identified as Escherichia coli using the method of 16S rRNA and intergenic spacer gene analysis combined with morphological, physiological, and biochemical tests. Three major components of the cellulases [carboxymethyl cellulase (CMCase), filter paper cellulase, and β-glucosidase] were produced with maximal activities (0.23, 0.08, and 0.15 U/ml) and maximum specific activities 4.13, 0.56, and 0.50 U/mg protein after 72, 96, and 120 h growth, respectively. Maximum CMCase activity was measured at 50°C and pH 6.0, respectively, and it also retained more than 60% of its maximal activity for at least 20 min at 50–70°C and 10 min at 80°C, respectively, and retained approximately 50% of its maximal activity after incubating at 90°C for 10 min. The enzyme could be applied in bioconversion of lignocellulosic agricultural wastes.
Optimization, gene cloning, expression, and molecular docking insights for enhanced cellulase enzyme production by Bacillus amyloliquefaciens strain elh1

Elham F El-Khamisi,Effat A M Soliman,Ghada M El-Sayed,Shaimaa A Nour,Mohamed O Abdel-Monem,Mervat G Hassan

DOI: https://doi.org/10.1186/s12934-024-02454-6

2024-07-02

Abstract:Background: In this study, we isolated a cellulase-producing bacterium, Bacillus amyloliquefaciens strain elh, from rice peel. We employed two optimization methods to enhance the yield of cellulase. Firstly, we utilized a one-variable-at-a-time (OVAT) approach to evaluate the impact of individual physical and chemical parameters. Subsequently, we employed response surface methodology (RSM) to investigate the interactions among these factors. We heterologously expressed the cellulase encoding gene using a cloning vectorin E. coli DH5α. Moreover, we conducted in silico molecular docking analysis to analyze the interaction between cellulase and carboxymethyl cellulose as a substrate. Results: The bacterial isolate eh1 exhibited an initial cellulase activity of 0.141 ± 0.077 U/ml when cultured in a specific medium, namely Basic Liquid Media (BLM), with rice peel as a substrate. This strain was identified as Bacillus amyloliquefaciens strain elh1 through 16S rRNA sequencing, assigned the accession number OR920278 in GenBank. The optimal incubation time was found to be 72 h of fermentation. Urea was identified as the most suitable nitrogen source, and dextrose as the optimal sugar, resulting in a production increase to 5.04 ± 0.120 U/ml. The peak activity of cellulase reached 14.04 ± 0.42 U/ml utilizing statistical optimization using Response Surface Methodology (RSM). This process comprised an initial screening utilizing the Plackett-Burman design and further refinement employing the BOX -Behnken Design. The gene responsible for cellulase production, egl, was effectively cloned and expressed in E. coli DH5α. The transformed cells exhibited a cellulase activity of 22.3 ± 0.24 U/ml. The egl gene sequence was deposited in GenBank with the accession number PP194445. In silico molecular docking revealed that the two hydroxyl groups of carboxymethyl cellulose bind to the residues of Glu169 inside the binding pocket of the CMCase. This interaction forms two hydrogen bonds, with an affinity score of -5.71. Conclusions: Optimization of cultural conditions significantly enhances the yield of cellulase enzyme when compared to unoptimized culturing conditions. Additionally, heterologous expression of egl gene showed that the recombinant form of the cellulase is active and that a valid expression system can contribute to a better yield of the enzyme.
Studies on cellulase production by bacillus sp.zu-04

沈雪亮,夏黎明

DOI: https://doi.org/10.3321/j.issn:0253-2417.2002.03.013

2002-01-01

Abstract:Cellulase production was studied using a bacterial strain (Bacillus sp. ZU-04) screened at our laboratory. Cellulase activity could be detected from pH value 6.5 to 10.5 Corn corb residue from xylose industry was the suitable carbon source, and bean cake was the suitable nitrogen source for the strain. NaCl and KH2PO4 were important to cellulase production, and their optimal mass parts were 0.5%-1.0% and 0.1%, respectively. Cellulase activity could be improved by addition of wheat bran. Optimal culture conditions in a 3 L fermenter were: stirring speed 300 r/min, aeration 0.3 L/(L• min), and culture temperature 37°C. Neutral and alkali cellulase activities detected from the fermentation broth were 257.6 U/mL and 125.6 U/mL, respectively. The enzyme had a good application potential.
Lactic acid production by coimmobilized cells using cellulosic hydrolysate

XueLiang Shen,XIA Li-ming

2007-01-01

Abstract:During the process of enzymatic hydrolysis of cellulose,the conversion of cellobiose to glucose is restricted due to the deficiency of cellobiase in the cellulase system.The accumulation of the hydrolysis product,cellobiose and glucose,caused severe feedback inhibition on the cellulase catalytic reaction.An effective solution was presented to resolve the problems.The spores containing cellobiase from Asperillus niger ZU-07 and the cells of Lactobacillus delbrium were entrapped together into calcium alginate gels to form a coimmobilized cell system,which was used to convert cellulosic hydrolysate to lactic acid.Analysis indicated that the cellobiose in the cellulosic hydrolysate could be hydrolyzed to glucose quickly by the cellobiase in the coimmobilized cells,and that the glucose could be converted to lactic acid effectively by the immobilized L.delbrueckii cells.The optimum reaction temperature of the coimmobilized cells was 48 ℃,and the produced lactic acid concentration by the coimmobilized cells reached 41.71 g/L after 48 h synergetic reaction in the cellulosic hydrolysate containing 49.40 g/L reducing sugar.The coimmobilized cells were quite stable and efficient,and could be repeatedly used for at least 12 batches.
Production and immobilization of cellobiase from Aspergillus niger ZU-07

Xueliang Shen,Liming Xia

DOI: https://doi.org/10.1016/S0032-9592(03)00264-4

IF: 4.885

2004-01-01

Process Biochemistry

Abstract:A high yield strain Aspergillus niger ZU-07 was used to produce cellobiase. It was found that the spores of A. niger ZU-07 were rich in cellobiase. By entrapping the spores into calcium alginate gels, the cellobiase was immobilized efficiently. The immobilized spores were quite stable, with a half-life 38 days. In repeated batch hydrolysis processes on 10gl−1 cellobiose by the immobilized spores, the yield of enzymic hydrolysis remained higher than 97% during 10 batches. In a continuous hydrolysis process, the yield reached 98% at 0.4h−1 dilution rate. The cellulosic residue of corncob pretreated with dilute acid was hydrolyzed with cellulase from Trichoderma reesei, the hydrolysis yield was only 69.5% and much cellobiose was accumulated in the hydrolysate. When the hydrolysate was further treated with immobilized spores of A. niger ZU-07, the hydrolysis yield of cellulose was improved to 84.2% because the feedback inhibition caused by cellobiose disappeared, the concentration of total reducing sugar increased from 48.50 to 58.78gl−1, and the ratio of glucose in the reducing sugar was increased from 53.6 to 89.5%. The research results are useful in the conversion and utilization of renewable biomass.
Enhancement of cellulase production by cellulolytic bacteria SB125 in submerged fermentation medium and biochemical characterization of the enzyme

Waseem Ayoub Malik,Saleem Javed

DOI: https://doi.org/10.1016/j.ijbiomac.2024.130415

IF: 8.2

2024-02-24

International Journal of Biological Macromolecules

Abstract:Microbial diversity from indigenous cultures has the potential to accelerate lignocellulose degradation through enzymes and make composting economically feasible. Therefore, this study is designed to boost cellulase output from a bacterial strain obtained from soil using a one-variable-at-a-time approach and response surface methodology. The bacteria recognized as Bacillus tequilensis (ON754229) produced the maximum cellulase at a temperature of 37 °C, pH -7.0, and incubation time of 72 h. A major contribution was anticipated by glucose (17 %) and ammonium sulfate (11 %) with cellulase activity of 0.56 U/mL in the optimized medium. The enzyme possessed activity of CMCase, FPase, and amylase of 0.589 μmol/min, 1.22 μmol/min, and 0.92 μmol/min respectively. SDS-PAGE showed a 65 kDa molecular weight of the enzyme capable of degrading cellulose, as confirmed by zymogram analysis. The enzyme showed relatively moderate thermo-stability towards neutral pH conditions possessing optimum conditions at pH 6.5 and temperature of 50 °C. The Km and Vmax values were 11.44 mM and 0.643 μmol/min respectively. The presence of MgSO 4 , ZnSO 4 , and Triton X- 100 increased the enzymatic reaction however AgNO 3 , EDTA, and HgCl 2 altered the activation process. These results showed cellulase from B. tequilensis SB125 would be suitable for conventional industrial processes that convert biomass into biofuels.

polymer science,biochemistry & molecular biology,chemistry, applied
Optimization Studies on Cellulase Production from Bacillus Anthracis and Ochrobactrum Anthropic (YZ1) Isolated from Soil

Mohammad Badrud Duza,S.A. Mastan

DOI: https://doi.org/10.3126/ijasbt.v3i2.12616

2015-06-25

International Journal of Applied Sciences and Biotechnology

Abstract:The present study was carried out to demonstrate the optimization of growth conditions of bacteria with high cellulase activity. Cellulose degrading bacteria were isolated from soil samples collected from different areas of Guntur district, A.P. The bacteria were isolated using serial dilution and pour plate methods. The isolated bacteria were identified by morphological, biochemical and molecular procedures. The isolated bacterial species were screened for cellulase production in sub-merged fermentation process. The two tested bacterial species showed maximum yield for cellulase production. These two bacteria were identified as Bacillus anthracis and Ochrobactrum anthropi (YZ1). Supplementation of glucose, peptone, tyrosine and EDTA to the fermentation medium is favoured enzyme secretion. The optimum pH and temperature for the activity of crude enzyme was 8 and 45°C, respectively for Ochrobactrum anthropi (YZ1) while for Bacillus anthracis, it was 8 and 4°C, respectively.14% of inoculum level and 96 h of incubation period showed the maximum yield by both the species bacteria for cellulase production. The results of present study indicated that favorable fermentation conditions and the selection of a suitable growth medium played a key role in the production of cellulase from newly isolated Bacillus anthracis and Ochrobactrum anthropi (YZ1).Int J Appl Sci Biotechnol, Vol 3(2): 272-284 DOI: http://dx.doi.org/10.3126/ijasbt.v3i2.12616
Screening of Cellulolytic Bacteria from Various Ecosystems and Their Cellulases Production under Multi-Stress Conditions

Balla,Silini,Cherif-Silini,Bouket,Boudechicha,Luptakova,Alenezi,Belbahri

DOI: https://doi.org/10.3390/catal12070769

IF: 3.9

2022-07-11

Catalysts

Abstract:Cellulose represents the most abundant component of plant biomass on earth; it is degraded by cellulases, specific enzymes produced by microorganisms. However, cellulases of bacterial origin attract more interest due to their natural diversity and ability to inhabit a variety of niches, allowing the selection of cellulolytic strains resistant to environmental stresses. The screening of the cellulolytic activity of 398 bacteria isolated from various ecosystems in Algeria (cave, ruins, chott, thermal station, and rhizosphere of arid and semi-arid regions) was performed by the appearance of a hydrolysis zone on carboxymethylcellulose (CMC) medium. The cellulase activity on CMC (1%) broth allowed to select 26 strains among which 12 had the best activity (0.3 U/mL to 2.2 U/mL). Optimization of physicochemical parameters (salinity: 0–1 M NaCl; pH: 3, 4, 7, 9, and 11; temperature: 30, 45, and 50 °C; PEG8000: 0 and 30%) involved in growth and cellulose production showed that the majority of strains were mesophilic, neutrophilic, or alkali- tolerant and tolerant to 30% of PEG8000. The cellulase activity and stability under different stress allowed to retain five strains, which the most efficient. Based on the 16S-rRNA sequencing results, they belonged to the genus Bacillus. The physicochemical properties of cellulases (crude extract) showed a CMCase active over a wide range of pH (4 to 11), optimal at 50 °C and 60 °C. The inhibiting salinity effect on the activity was not detected and was negligible on the enzymatic stability. The residual CMCase activity remained between 40 and 70% in a temperature range between 40 and 70 °C, was stable over a wide range of saline concentrations (0–2000 mM), and was weakly affected at 30% of PEG8000. The crude enzyme extract was able to hydrolyze both soluble and insoluble cellulosic substrates. The evaluation of the hydrolysis capacity of lignocellulosic waste revealed the ability of tested strains to degrade wheat bran, barley bran, and corncob. In addition, the enzyme showed significant multi-stress resistance on solid and liquid media. By these characteristics, these cellulolytic bacteria could be attractive to be used in various industrial and biotechnology applications.

chemistry, physical
Isolation, screening and optimization of alkaliphilic cellulolytic fungi for production of cellulase

Nor’Izzah Zainuddin,Muaz Mohd Zaini Makhtar,Ahmad Anas Nagoor Gunny,Subash Chandra Bose Gopinath,Abdul Aziz Ahmad,Kavita Pusphanathan,Masoom Raza Siddiqui,Mahboob Alam,Mohd Rafatullah

DOI: https://doi.org/10.1515/gps-2023-0153

2024-01-01

Green Processing and Synthesis

Abstract:Abstract This study concerns with the production and partial characterization of alkaline cellulase from alkaliphilic cellulolytic (AC) fungi isolated fromsoil in Perlis, Malaysia. The best fungi strain was selected on the basis of producing the highest cellulase at high pH conditions. Cellulase from the selected fungi strain was further characterized under saccharification but varies in operating parameters. Finally, the kinetic model describing the growth of the AC fungi strain was studied by employing the logistic model. Among the tested fungi strains, Basidiomycetes strain (BK1) showed high potentiality for the production of maximum alkaline cellulase production at pH 9 after 72 h of incubation at 30°C containing 6 g·L −1 carboxyl methyl cellulose. The saccharification process showed that the enzyme favour high alkaline condition and proves thermotolerant properties, while 15% (v/v) enzyme loading and 1% substrate concentration recorded the highest glucose production at about 1.2–1.3 mg·mL −1 . The novelty of the study is to identify and optimize a unique indigenous fungi that emit alkaliphilic cellulase as alternative usage in biotechnology industries due to its capacity to adapt to the extreme conditions of specific industrial processes. There are revolutionary options for use in biotechnological businesses that involve high pH and therefore have substantial biotechnological promise.

engineering, chemical,green & sustainable science & technology,chemistry, multidisciplinary
Optimization of fermentation condition for cellulase enzyme production from Bacillus sp.

Maidul Islam,Palash Kumar Sarkar,A.K.M. Mohiuddin,Md. Suzauddula

DOI: https://doi.org/10.2478/mjhr-2019-0009

2019-12-01

Malaysian Journal of Halal Research

Abstract:Abstract Cellulase is an important enzyme in present-day of industrial biotechnology. The current study is concerned with the production and partial characterization of cellulase enzyme from Bacillus sp. The effect of various fermentation conditions for cellulase production through shake-flask culture was investigated. Maximum enzyme production was obtained after 24 hours of incubation in fermentation medium with pH 3.5 at 35°C under having agitation at 150 rpm while inoculums volume 1% was applied. Enzyme production was 1.91 times higher after optimizing the production condition as compared to the basal media. Cellulase characterization revealed that optimum activity was at pH 5.5 and 50°C for 50 minutes. About 68% of the activity retained after heating the crude enzyme solution at 50°C for 30 minutes. This nature makes cellulase a suitable candidate for current mainstream biomass conversions for sustainable agriculture and industrial processes.
Synthesis, Optimization, and Characterization of Cellulase Enzyme Obtained from Thermotolerant Bacillus subtilis F3: An Insight into Cotton Fabric Polishing Activity

Amr Fouda,Khalid S Alshallash,Hossam M Atta,Mamdouh S El Gamal,Mohamed M Bakry,Abdullah S Alawam,Salem S Salem

DOI: https://doi.org/10.4014/jmb.2309.09023

2024-01-28

Abstract:The efficacy of 40 bacterial isolates obtained from hot spring water samples to produce cellulase enzymes was investigated. As a result, the strain Bacillus subtilis F3, which was identified using traditional and molecular methods, was selected as the most potent for cellulase production. Optimization was carried out using one-factor-at-a-time (OFAT) and BOX-Behnken Design to detect the best conditions for the highest cellulase activity. This was accomplished after an incubation period of 24 h at 45°C and pH 8, with an inoculum size of 1% (v/v), 5 g/l of peptone as nitrogen source, and 7.5 g/l of CMC. Moreover, the best concentration of ammonium sulfate for cellulase enzyme precipitation was 60% followed by purification using a dialysis bag and Sephadex G-100 column chromatography to collect the purified enzyme. The purified cellulase enzyme was characterized by 5.39-fold enrichment, with a specific activity of 54.20 U/mg and a molecular weight of 439 kDa. There were 15 amino acids involved in the purified cellulase, with high concentrations of 160 and 100 mg/l for glycine and proline respectively. The highest stability and activity of the purified cellulase was attained at pH 7 and 50°C in the presence of 150 ppm of CaCl2, NaCl, and ZnO metal ions. Finally, the biopolishing activity of the cellulase enzyme, as indicated by weight loss percentages of the cotton fabric, was dependent on concentration and treatment time. Overall, the thermotolerant B. subtilis F3 strain has the potential to provide highly stable and highly active cellulase enzyme for use in biopolishing of cotton fabrics.
Optimization of cellulase production for Bacillus sp. and Pseudomonas sp. soil isolates

Arusha P. Nandimath,Kiran R. Kharat,Shanti G. Gupta,Arun S. Kharat,P Nandimath Arusha,R Kharat Kiran,G Gupta Shanti,S Kharat Arun

DOI: https://doi.org/10.5897/ajmr2016.7954

2016-04-07

African Journal of Microbiology Research

Abstract:This investigation deals with optimizing the cellulase producing bacterial isolates for better enzyme yield. Cellulose degrading bacteria were isolated from garden soil (Aurangabad, MS, India). Amongst 40 different bacterial isolates, two of the bacterial isolates, 2b and 38b, were processed for preliminary identification with morphological, cultural and biochemical characterization. Based on these studies, strain 2b was qualified to belong to Pseudomonas sp. and strain 38b was qualified to belong to Bacillus sp. Optimization of the fermentation medium for maximum cellulase production was carried out for both strains of 2b and 38b. The culture conditions such as: pH, temperature, substrate concentration and incubation time were optimized. The optimum conditions found for cellulase production were 30°C at pH 5. Studies on partially purified cellulase, a high cellulolytic activity was observed in Pseudomonas sp. The Km 22.11 and 14.36 were obtained for cellulase from 2b and 38b, respectively. The Vmax was found to be 1 and 1.121 mmol (min mg)−1 for cellulase from 2b and 38b , respectively. Key words: Bacillus sp., cellulase production, pH, Pseudomonas sp.
A thermo-tolerant cellulase enzyme produced by Bacillus amyloliquefaciens M7, an insight into synthesis, optimization, characterization, and bio-polishing activity

Amr Fouda,Khalid Sulaiman Alshallash,Hossam Mohamed Atta,Mamdouh Salem El-Gamal,Mohamed Mostafa Bakry,Mohammed Ibrahim Alghonaim,Salem Salah Salem

DOI: https://doi.org/10.1515/gps-2023-0127

2023-01-01

Green Processing and Synthesis

Abstract:Abstract In the current study, among 36 isolates, the bacterial strain M7 was selected as the highest cellulase producer and underwent traditional and molecular identification as Bacillus amyloliquefaciens M7. The productivity of the cellulase enzyme was optimized using the one-factor-at-a-time method. The optimization analysis showed that the best pH value for cellulase production was 7, in the presence of 1% bacterial inoculum size, 5 g·L −1 of carboxymethyl cellulose, 5 g·L −1 of peptone as nitrogen source, and incubation period of 24 h at a temperature of 35°C. The highest cellulase activity (64.98 U·mL −1 ) was obtained after optimizing conditions using BOX-Behnken Design. The maximum cellulase yield (75.53%) was obtained after precipitation by 60% ammonium sulfate, followed by purification by dialysis bag and Sephadex G-100 column chromatography. The purified cellulase enzyme was characterized by 6.38-fold enrichment, with specific activity (60.54 U·mg −1 ), and molecular weight of approximately 439.0 Da. The constituent of purified cellulase was 18 amino acids with high concentrations of 200 and 160 mg·L −1 for glycine and arginine, respectively. The purified cellulase enzyme was more stable and active at pH 8 and an incubation temperature of 50°C. The metal ions CaCl 2 , NaCl, and ZnO enhanced the activity of purified cellulase enzyme. Finally, the B. amyloliquefaciens M7-cellulase exhibits high bio-polishing activity of cotton fabrics with low weight loss (4.3%) which was attained at a maximum concentration (1%, v/v) for 90 min.

engineering, chemical,green & sustainable science & technology,chemistry, multidisciplinary
Augmented cellulase production by Bacillus subtilis strain MU S1 using different statistical experimental designs

C.P. Sreena,Denoj Sebastian

DOI: https://doi.org/10.1016/j.jgeb.2017.12.005

2018-06-01

Journal of Genetic Engineering and Biotechnology

Abstract:The production of cellulase by Bacillus subtilis MU S1, a strain isolated from Eravikulam National Park, was optimized using one-factor-at-a-time (OFAT) and statistical methods. Physical parameters like incubation temperature and agitation speed were optimized using OFAT and found to be 40 °C and 150 rpm, respectively, whereas, medium was optimized by statistical tools. Plackett-Burman design (PBD) was employed to screen the significant variables that highly influence cellulase production. The design showed carboxymethyl cellulose (CMC), yeast extract, NaCl, pH, MgSO4 and NaNO3 as the most significant components that affect cellulase production. Among these CMC, yeast extract, NaCl and pH showed positive effect whereas MgSO4 and NaNO3 were found to be significant at their lower levels. The optimum levels of the components that positively affect enzyme production were determined using response surface methodology (RSM) based on central composite design (CCD). Three factors namely CMC, yeast extract and NaCl were studied at five levels whilst pH of the medium was kept constant at 7. The optimal levels of the components were CMC (13.46 g/l), yeast extract (8.38 g/l) and NaCl (6.31 g/l) at pH 7. The maximum cellulase activity in optimized medium was 566.66 U/ml which was close to the predicted activity of 541.05 U/ml. Optimization of physical parameters and medium components showed an overall 3.2-fold increase in activity compared to unoptimized condition (179.06 U/ml).
Characterization of Cellulose-Degrading Bacteria Isolated from Soil and the Optimization of Their Culture Conditions for Cellulase Production

Aristide Laurel Mokale Kognou,Chonlong Chio,Janak Raj Khatiwada,Sarita Shrestha,Xuantong Chen,Sihai Han,Hongwei Li,Zi-Hua Jiang,Chunbao Charles Xu,Wensheng Qin

DOI: https://doi.org/10.1007/s12010-022-04002-7

2022-06-12

Applied Biochemistry and Biotechnology

Abstract:The characterization of bacteria with hydrolytic potential significantly contributes to the industries. Six cellulose-degrading bacteria were isolated from mixture soil samples collected at Kingfisher Lake and the University of Manitoba campus by Congo red method using carboxymethyl cellulose agar medium and identified as Paenarthrobacter sp. MKAL1, Hymenobacter sp. MKAL2, Mycobacterium sp. MKAL3, Stenotrophomonas sp. MKAL4, Chryseobacterium sp. MKAL5, and Bacillus sp. MKAL6. Their cellulase production was optimized by controlling different environmental and nutritional factors such as pH, temperature, incubation period, substrate concentration, nitrogen, and carbon sources using the dinitrosalicylic acid and response surface methods. Except for Paenarthrobacter sp. MKAL1, all strains are motile. Only Bacillus sp. MKAL6 was non-salt-tolerant and showed gelatinase activity. Sucrose enhanced higher cellulase activity of 78.87 ± 4.71 to 190.30 ± 6.42 U/mL in these strains at their optimum pH (5–6) and temperature (35–40 °C). The molecular weights of these cellulases were about 25 kDa. These bacterial strains could be promising biocatalysts for converting cellulose into glucose for industrial purposes.

biotechnology & applied microbiology,biochemistry & molecular biology
Production and activity optimization of cellulase and xylanase from the compost isolated Paracoccus kondratievae strain GB in Egypt

Mahmoud N. Menshawy,Mo'men H. El-Katatny,Ahmed M. Abdel-Hamid,Hussam H. Arafat,Mahmoud Menshawy,Mo&#;men El-Katatny,Ahmed Abdel-Hamid,Hussam Arafat

DOI: https://doi.org/10.21608/jmr.2023.218173.1112

2023-09-19

Journal of Modern Research

Abstract:The production and activity of both cellulase and xylanase from Paracoccus kondratievae strain GB with accession number (MW532124) isolated from compost were determined. The effect of various parameters on enzymes production including pH, temperature, carbon source, nitrogen source, incubation time, and agitation speed was investigated. Enzyme activity was also assessed by estimating the impact of temperature, pH, and incubation period. The highest value of cellulase production was accomplished at an incubation temperature of 35 °C (25.9 pKat ml-1), pH 8.0 (46.96 pKat ml-1), agitation speed of 150 rpm (47.8 pKat ml-1), incubation period of 5-7 days (41.8 pKat ml-1), CMC as a carbon source (205.8 pKat ml-1) and ammonium sulphate as a nitrogen source (200.15 pKat ml-1). While, xylanase was produced maximally at 35 °C (4.9 nKat ml-1), pH 8.0 (6.45 nKat ml-1), agitation speed of 150 rpm (4.15 nKat ml-1), incubation period of 4 days (4.15 nKat ml-1), xylan as a carbon source (4.5 nKat ml-1) and ammonium nitrate as a nitrogen source (6.66 nKat ml-1). On the other hand, the highest xylanase activity was obtained at 45 °C and pH 6.0 after 50 minutes of incubation, whereas, the highest cellulase activity was obtained at 45-55 °C and pH 6.0 after 60-70 minutes. These results show the thermophilic nature of these two examined enzymes. Our findings suggest that the thermophilic glycosyl hydrolases produced Paracoccus kondratievae strain GB (MW532124) might be good candidates for the degradation of lignocellulosic waste for industrial applications.
Standard BiCMOS Implementation of a Two-Peak Negative Differential Resistance Circuit with High and Adjustable Peak-to-Valley Current Ratio

Dong-Shong Liang,K. Gan,C. Tai,Cher-Shiung Tsai

DOI: https://doi.org/10.1587/TRANSELE.E92.C.635

2009-05-01

IEICE Transactions on Electronics

Abstract:The paper demonstrates a novel two-peak negative differential resistance (NDR) circuit combining Si-based metal-oxide-semiconductor field-effect-transistor (MOS) and SiGe-based heterojunction bipolar transistor (HBT). Compared to the resonant-tunneling diode, MOS-HBT-NDR has two major advantages in our circuit design. One is that the fabrication of this MOS-HBT-NDR-based application can be fully implemented by the standard BiCMOS process. Another is that the peak current can be effectively adjusted by the controlled voltage. The peak-to-valley current ratio is about 4136 and 9.4 at the first and second peak respectively. It is very useful for circuit designers to consider the NDR-based applications.
Screening of cellulose-degrading bacteria and optimization of cellulase production from Bacillus cereus A49 through response surface methodology

Jinjun Wang,Fei Bao,Huixian Wei,Yang Zhang

DOI: https://doi.org/10.1038/s41598-024-58540-7

IF: 4.6

2024-04-03

Scientific Reports

Abstract:Cellulose-degrading microorganisms hold immense significance in utilizing cellulose resources efficiently. The screening of natural cellulase bacteria and the optimization of fermentation conditions are the hot spots of research. This study meticulously screened cellulose-degrading bacteria from mixed soil samples adopting a multi-step approach, encompassing preliminary culture medium screening, Congo red medium-based re-screening, and quantification of cellulase activity across various strains. Particularly, three robust cellulase-producing strains were identified: A24 (MT740356.1 Brevibacillus borstelensis ), A49 (MT740358.1 Bacillus cereus ), and A61 (MT740357.1 Paenibacillus sp.). For subsequent cultivation experiments, the growth curves of the three obtained isolates were monitored diligently. Additionally, optimal CMCase production conditions were determined, keeping CMCase activity as a key metric, through a series of single-factor experiments: agitation speed, cultivation temperature, unit medium concentration, and inoculum volume. Maximum CMCase production was observed at 150 rpm/37 °C, doubling the unit medium addition, and a 5 mL inoculation volume. Further optimization was conducted using the selected isolate A49 employing response surface methodology. The software model recommended a 2.21fold unit medium addition, 36.11 °C temperature, and 4.91 mL inoculant volume for optimal CMCase production. Consequently, three parallel experiments were conducted based on predicted conditions consistently yielding an average CMCase production activity of 15.63 U/mL, closely aligning with the predicted value of 16.41 U/mL. These findings validated the reliability of the model and demonstrated the effectiveness of optimized CMCase production conditions for isolate A49.

multidisciplinary sciences
Screening and Identification of a Facultative Anaerobic Cellulase-producing Strain and Characterization of Cellulase

ZHANG Li-ping,LI Ya-bing,CHENG Hui-cai,HUANG Ya-li,ZHANG Ning

2010-01-01

Abstract:Strain CR-14 producing extacellular cellulase was isolated from contents of cattal rumen.According to its morphological,the physiological and biochemical properties,16 S rDNA phylogenetic analysis,indicated that the strain belonged to Celloulonmonas sp.The main components of cellulase of strain CR-14 was CX,C1 and β-glucosidase.The activity of Cx was the highest,while activity of C1 and β-glucosidase was relatively low.The optimal enzyme reaction conditions was 50℃,pH 6.0.Under the conditions of 60℃ and pH 6.0-7.5 cellulase was stability.Mn2+,Fe2+ could significantly promote the vitality of the enzyme.Zn2+,Cu2+,Ca2+and K+ inhibit the vitality of the enzyme.

Validation and relevance of Rheumatoid Arthritis Pain Scale (RAPS) in Indian (Asian) patients suffering from rheumatoid arthritis

Optimization of a Natural Medium for Cellulase by a Marine Aspergillus Niger Using Response Surface Methodology

Screening and Identification of New Isolate: Thermostable Escherichia coli with Novel Thermoalkalotolerant Cellulases

Optimization, gene cloning, expression, and molecular docking insights for enhanced cellulase enzyme production by Bacillus amyloliquefaciens strain elh1

Studies on cellulase production by bacillus sp.zu-04

Lactic acid production by coimmobilized cells using cellulosic hydrolysate

Production and immobilization of cellobiase from Aspergillus niger ZU-07

Enhancement of cellulase production by cellulolytic bacteria SB125 in submerged fermentation medium and biochemical characterization of the enzyme

Optimization Studies on Cellulase Production from Bacillus Anthracis and Ochrobactrum Anthropic (YZ1) Isolated from Soil

Screening of Cellulolytic Bacteria from Various Ecosystems and Their Cellulases Production under Multi-Stress Conditions

Isolation, screening and optimization of alkaliphilic cellulolytic fungi for production of cellulase

Optimization of fermentation condition for cellulase enzyme production from Bacillus sp.

Synthesis, Optimization, and Characterization of Cellulase Enzyme Obtained from Thermotolerant Bacillus subtilis F3: An Insight into Cotton Fabric Polishing Activity

Optimization of cellulase production for Bacillus sp. and Pseudomonas sp. soil isolates

A thermo-tolerant cellulase enzyme produced by Bacillus amyloliquefaciens M7, an insight into synthesis, optimization, characterization, and bio-polishing activity

Augmented cellulase production by Bacillus subtilis strain MU S1 using different statistical experimental designs

Characterization of Cellulose-Degrading Bacteria Isolated from Soil and the Optimization of Their Culture Conditions for Cellulase Production

Production and activity optimization of cellulase and xylanase from the compost isolated Paracoccus kondratievae strain GB in Egypt

Standard BiCMOS Implementation of a Two-Peak Negative Differential Resistance Circuit with High and Adjustable Peak-to-Valley Current Ratio

Screening of cellulose-degrading bacteria and optimization of cellulase production from Bacillus cereus A49 through response surface methodology

Screening and Identification of a Facultative Anaerobic Cellulase-producing Strain and Characterization of Cellulase