Abstract:The poses of base station antennas play an important role in cellular network optimization. Existing methods of pose estimation are based on physical measurements performed either by tower climbers or using additional sensors attached to antennas. In this paper, we present a novel non-contact method of antenna pose measurement based on multi-view images of the antenna and inertial measurement unit (IMU) data captured by a mobile phone. Given a known 3D model of the antenna, we first estimate the antenna pose relative to the phone camera from the multi-view images and then employ the corresponding IMU data to transform the pose from the camera coordinate frame into the Earth coordinate frame. To enhance the resulting accuracy, we improve existing camera-IMU calibration models by introducing additional degrees of freedom between the IMU sensors and defining a new error metric based on both the downtilt and azimuth angles, instead of a unified rotational error metric, to refine the calibration. In comparison with existing camera-IMU calibration methods, our method achieves an improvement in azimuth accuracy of approximately 1.0 degree on average while maintaining the same level of downtilt accuracy. For the pose estimation in the camera coordinate frame, we propose an automatic method of initializing the optimization solver and generating bounding constraints on the resulting pose to achieve better accuracy. With this initialization, state-of-the-art visual pose estimation methods yield satisfactory results in more than 75% of cases when plugged into our pipeline, and our solution, which takes advantage of the constraints, achieves even lower estimation errors on the downtilt and azimuth angles, both on average (0.13 and 0.3 degrees lower, respectively) and in the worst case (0.15 and 7.3 degrees lower, respectively), according to an evaluation conducted on a dataset consisting of 65 groups of data. We show that both of our enhancements contribute to the performance improvement offered by the proposed estimation pipeline, which achieves downtilt and azimuth accuracies of respectively 0.47 and 5.6 degrees on average and 1.38 and 12.0 degrees in the worst case, thereby satisfying the accuracy requirements for network optimization in the telecommunication industry.

Study of IMU Installation Position for Posture Estimation of Excavators

A New Measurement Method of Real-time Pose Estimation for an Automatic Hydraulic Excavator

Vision-based Excavator Pose Estimation for Automatic Control

Full-body pose estimation for excavators based on data fusion of multiple onboard sensors

Calibration of Visual Measurement System for Excavator Manipulator Pose

Research of Self-Calibration of Position and Attitude Monitoring System for Large Front Shovel Excavator

Recognizing sitting activities of excavator operators using multi-sensor data fusion with machine learning and deep learning algorithms

Estimation of Antenna Pose in the Earth Frame Using Camera and Imu Data from Mobile Phones

Estimation of Ground Posture Angle for Quadruped Robots Based on IMU

Dynamic Hazardous Proximity Zone Design for Excavator Based on 3D Mechanical Arm Pose Estimation Via Computer Vision

Construction posture recognition with primitive joints extended planar normal vector quaternions

Detecting the Hazards of Lifting and Carrying in Construction Through a Coupled 3D Sensing and IMUs Sensing System

A Low-Cost Inertial Measurement Unit Motion Capture System for Operation Posture Collection and Recognition

A Low-Cost and Smart IMU Tool for Tracking Construction Activities

New Method for Posture Estimating of Non-Gyro Inertial Measurement Unit

Personal Dead Reckoning Using IMU Mounted on Upper Torso and Inverted Pendulum Model

Passive Robot Based Measuring Method for Intravehicular and Extravehicular Mobility Unit Spacesuit Arm

IMU-based Real-time Pose Measurement System for Anterior Pelvic Plane in Total Hip Replacement Surgeries.

Estimation of lower back muscle force in a lifting task using wearable IMUs

Validation of an Embedded Motion-Capture and EMG Setup for the Analysis of Musculoskeletal Disorder Risks during Manhole Cover Handling

Towards Automatic Operation Motion Tracking Algorithm Based on Inertial Sensors for Multi Joints Machinery