Abstract:Background: Percutaneous pulmonary valve implantation (PPVI) has emerged as a less invasive alternative for treating severe pulmonary regurgitation after tetralogy of Fallot (TOF) repair in patients with a native right ventricular outflow tract (RVOT). However, the success of PPVI depends on precise patient-specific valve sizing, the avoidance of oversizing complications, and optimal valve performance. In recent years, innovative adaptations of commercially available cardiovascular mock loops have been used to test conduits in the pulmonary position. These models are instrumental in facilitating accurate pulmonic valve sizing, mitigating the risk of oversizing, and providing insight into the valve performance before implantation. This study explored the utilization of custom-modified mock loops to implant patient-specific 3D-printed pulmonary artery geometries, thereby advancing PPVI planning and execution. Material and Methods: Patient-specific 3D-printed pulmonary artery geometries of five patients who underwent PPVI using Pulsta transcatheter heart valve (THV) ® were tested in a modified ViVitro pulse duplicator system®. Various valve sizes were subjected to 10 cycles of testing at different cardiac output levels. The transpulmonary systolic and regurgitation fractions of the valves were also recorded and compared. Results: A total of 39 experiments were conducted using five different patient geometries and several different valve sizes (26, 28, 30, and 32 mm) at 3, 4, and 5 L/min cardiac output at heart rates of 70 beats per minute (bpm) and 60/40 systolic/diastolic ratios. The pressure gradients and regurgitation fractions of the tested valve sizes in the models were found to be similar to the pressure gradients and regurgitation fractions of valves used in real procedures. However, in two patients, different valve sizes showed better hemodynamic values than the actual implanted valves. Discussion: The use of 3D printing technology, electromagnetic flow meters, and the custom-modified ViVitro pulse duplicator system® in conjunction with patient-specific pulmonary artery models has enabled a comprehensive assessment of percutaneous pulmonic valve implantation performance. This approach allows for accurate valve sizing, minimization of oversizing risks, and valuable insights into hemodynamic behavior before implantation. The data obtained from this experimental setup will contribute to advancing PPVI procedures and offer potential benefits in improving patient outcomes and safety.

First in human experience of a new self-expandable percutaneous pulmonary valve implantation using knitted nitinol-wire and tri-leaflet porcine pericardial valve in the native right ventricular outflow tract

Early Clinical Experience with a Novel Self‐expanding Percutaneous Stent‐valve in the Native Right Ventricular Outflow Tract

Extended application of percutaneous pulmonary valve implantation

The adaptability of the Pulsta valve to the diverse main pulmonary artery shape of native right ventricular outflow tract disease

Transcatheter Pulmonary Valve Replacement from Autologous Pericardium with a Self-Expandable Nitinol Stent in an Adult Sheep Model

New Self-Expanding Transcatheter Valve for Off-Pump Transatrial Mitral Valve-In-Ring Implantation

Rupture of a calcified right ventricle to pulmonary artery homograft by balloon dilation- emergency rescue by venus P-Valve

Midterm Experience with the Self‐Expandable Venus P‐ValveTM for Percutaneous Pulmonary Valve Replacement in Large Right Ventricular Outflow Tracts

Initial experience of percutaneous pulmonary valve implantation using self-expanding valve

Treatment of degenerated mitral bioprosthesis using inovare alpha rapid deployment balloon-expandable prosthesis-a minimally invasive approach

Single-Barrel, Double-Barrel, and Fenestrated Endografts to Facilitate Transcatheter Pulmonary Valve Replacement in Large RVOT

A Self-Expanding Percutaneous Valve for Patients with Pulmonary Regurgitation and an Enlarged Native Right Ventricular Outflow Tract: One-Year Results

Optimizing percutaneous pulmonary valve implantation with patient-specific 3D-printed pulmonary artery models and hemodynamic assessment

Long‐term function of a novel autologous transcatheter pulmonary heart valve implant in an adult animal model

Transcatheter pulmonary valve replacement in surgically‐created double‐barrel right ventricular outflow tracts: A single center case‐series

A case of a transcatheter valve-in-valve implantation using balloon expandable valve for failed SOLO SMART stentless bioprosthetic valve

Early Outcomes From a Multicenter Transcatheter Self-Expanding Pulmonary Valve Replacement Registry

Multicenter Comparison of Percutaneous and Surgical Pulmonary Valve Replacement in Large RVOT.

Finite element modeling with patient‐specific geometry to assess clinical risks of percutaneous pulmonary valve implantation

First reported long-term two- and three-dimensional echocardiographic follow-up with histopathological analysis of a transcatheter pulmonary valve implantation in a pet dog

Self-expanding Apical Closure Device for Full-Percutaneous Closed-Chest Transapical Valve Procedures with Large-Sized Introducer Sheaths: First Study in an Animal Model