Abstract:In this study, a series of laboratory experiments for the response of wave induced clay-sand seabed were carried out to clarify the mechanism of liquefaction of clayey seabed. The experiments were conducted in an 80 m long wave flume. In the tests, the sand-clay beds were mixed with various clay contents (CC) from 0.5% to 15% and were tested for given wave conditions. The pore water pressure and the water elevation were measured in each test. Soil properties tests and scanning electron microscope (SEM) experiments on different seabed samples were carried out to further explore the mechanism of liquefaction. The experimental results indicated that the amplitude and accumulation of the excess pore water pressure (EPP) varied with different CC in the sand-clay bed. With the introduction of CC, micro-structure and properties (such as permeability and compressibility) of bed soils changed. Sand-clay bed presented more susceptibility to liquefy compared with pure sand bed. CC promoted seabed liquefaction, even if the added amount was very small (CC is 0.5%), however when CC exceeded a certain value (10% in this study), the mixed bed will not be liquefied. This phenomenon can be well explained by the micro-structure of sand-clay bed. CC within a sandy seabed, does not only affect the permeability, but also change the compressibility of seabed soils. For example, the microfabric of seabed vulnerable to liquefaction is loose. Clay aggregations generally gathered at the sand particle contact points. This microfabric is easily compressed under wave loads and allowed pore water to flow, resulting in the accumulation of pore water pressure. On the other hand, the microfabric of seabed that was resistant to liquefaction appeared to be more compact. Due to clay-filled gaps between the sand particles, the pore water is more difficult to flow when seabed was compressed. Furthermore, the tendency of seabed liquefaction is closely related to CC.

Energy-based liquefaction assessment of partially and fully saturated clayey sands

Characterizing the Liquefaction Potential and Pore Pressure Generation of Silty Sands Through the Energy-Based Approach in the Framework of Critical State Soil Mechanics

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Energy-based Evaluation of Undrained Cyclic Behavior of Marine Soft Clay under Multidirectional Simple Shear Stress Paths

Investigating the cyclic behavior of Konarak carbonate sand–silt mixtures: An energy-based approach

A Numerical Model for Assessing the Effect of Low Clay Content on Wave-Induced Seabed Liquefaction

Experiment and Numerical Simulation of Repeated Liquefaction-Consolidation of Sand

Evaluation of the Liquefaction Potential of Sand under Random Loading Conditions: Equivalent Approach Versus Energy-Based Method

Numerical Modelling of Liquefaction in Loose Sand Deposits Subjected to Ocean Waves

Experimental Study of Liquefaction Characteristics of Saturated Silt Based on the Cumulative Dissipated Energy

Evaluation of the effects of initial deviatoric stress and cyclic stress amplitude on liquefaction potential of loose and medium-dense sands: An energy-based method

Flow Liquefaction Potential of Loose Sand: Stress Path Envelope and Energy-Based Evaluation

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

Energy-based method for the failure criterion and resistance evaluation of marine clay under cyclic loading

Experimental Study on Mechanism of Wave-Induced Liquefaction of Sand-Clay Seabed

Experimental Study on Liquefaction Characteristics of Saturated Marine Coral Sand Based on Dissipated Energy Evaluation

Evaluation of Liquefaction Potential in Saturated Sand under Different Drainage Boundary Conditions—An Energy Approach