Abstract:Single-phase white light phosphors for phosphor-converted white light-emitting diodes (pc-WLEDs) have become a hot spot and attracted considerable attention. However, the unsatisfactory luminous efficiency and colour rendering index of this kind of device hinder their large-scale applications in the field of lighting. Herein, a novel multi-centre activated single-phase white light phosphor, Gd 2 Sr 3 B 4 O 12 :Ce 3+ ,Tb 3+ ,Sm 3+ , has been designed and prepared. The crystal structures of the host and the doped samples are characterized with XRD and Rietveld refinements. The band gap of the host calculated with the density functional theory is consistent with the value obtained from the UV-Vis reflection spectrum. Benefiting from the energy transfer paths of Ce 3+ –Tb 3+ , Ce 3+ –Sm 3+ and Tb 3+ –Sm 3+ , which are quantitatively evaluated with photoluminescence spectra and decay curves, the intensities of the characteristic emission peaks of the three dopants are found to be closely interlocked and the emission colour of the phosphors can be precisely tuned by adjusting the relative ratio of the three ions. Under the excitation of near-UV light, the two phosphors of Gd 2 Sr 3 B 4 O 12 :0.03Ce 3+ ,0.18Tb 3+ ,0.05Sm 3+ and Gd 2 Sr 3 B 4 O 12 :0.03Ce 3+ ,0.22Tb 3+ ,0.07Sm 3+ emit white light with CIE coordinates of (0.32, 0.35) and (0.34, 0.34), and the quantum efficiencies are 46.8% and 34.9%, respectively. The temperature-dependent photoluminescence spectra of the phosphors show that the quenching temperature ( T 50% ) is as high as 450 K. Finally, WLED devices with maximal colour rendering index of 87.5 are obtained by fabricating the two single-phase white light phosphors with 365 nm LED chips. The balanced and preferable comprehensive performances of Gd 2 Sr 3 B 4 O 12 :Ce 3+ ,Tb 3+ ,Sm 3+ demonstrate that the as-prepared single-phase white light phosphor can be a promising candidate for fabricating near-UV chip-based WLEDs.

Preparation of balanced trichromatic white phosphors for solid-state white lighting

A Fluorescein-Centered Polymer As a Phosphor for Fabricating Pure White Light-Emitting Diodes

Design of Phosphor White Light Systems for High-Power Applications

Optimization Of The Single-Phased White Phosphor Of Li2srsio4:Eu2+, Ce3+ For Light-Emitting Diodes By Using The Combinatorial Approach Assisted With The Taguchi Method

Synthesis of Efficient and Stable Tetrabutylammonium Copper Halides with Dual Emissions for Warm White Light‐Emitting Diodes

Tunable cold/warm white light emission from Bi3+/Te4+ co-doped Cs2ZrCl6 perovskite phosphors

Tuning Color-Correlated Temperature and Color Rendering Index of Phosphorescent White Polymer Light-Emitting Diodes: Towards Healthy Solid-State Lighting

A single Eu2+-activated high-color-rendering oxychloride white-light phosphor for white-light-emitting diodes

Combinatorial Chemistry Approach To Searching Phosphors For White Light-Emitting Diodes In (Gd-Y-Bi-Eu)Vo4 Quaternary System

Realizing White LEDs with High Luminous Efficiency and High Color Rendering Index by Using Double Green Phosphors

Single phase white LED phosphor Ca3YAl3B4O15:Ce3+,Tb3+,Sm3+ with superior performance: Color-tunable and energy transfer study

A multi-centre activated single-phase white light phosphor with high efficiency for near-UV based WLEDs

Toward High‐Quality Laser‐Driven Lightings: Chromaticity‐Tunable Phosphor‐in‐Glass Film with “Phosphor Pattern” Design

Light Converting Inorganic Phosphors for White Light-Emitting Diodes

Full-visible-spectrum emission with high color rendering index and low correlated color temperature enabled by a single-phased phosphor of α-Sr2V1.98P0.02O7: 0.5% Eu3+

Optimization of the Single-Phased White Phosphor of Li<sub>2</sub>SrSiO<sub>4</sub>: Eu<sup>2+</sup>, Ce<sup>3+</sup> for Light-Emitting Diodes by Using the Combinatorial Approach Assisted with the Taguchi Method

Photonic Crystal Phosphors Integrated on a Blue LED Chip for Efficient White Light Generation

Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices

Preparation of CaAlSiN3:Eu2+ red-emitting phosphor by a two-step method for solid-state lighting applications

Silicon-based nanoparticles grafted lanthanide coordination polymer phosphor: Facile synthesis, formation process and white light-emitting diodes

Recent Advances in Preparing Transparent Phosphor Ceramics for High-Index Color Rendering and High-Power Lighting