Abstract:Abstract Thermally evaporated C 60 is a near-ubiquitous electron transport layer in state-of-the-art p–i–n perovskite-based solar cells. As perovskite photovoltaic technologies are moving toward industrialization, batch-to-batch reproducibility of device performances becomes crucial. Here, we show that commercial as-received (99.75% pure) C 60 source materials may coalesce during repeated thermal evaporation processes, jeopardizing such reproducibility. We find that the coalescence is due to oxygen present in the initial source powder and leads to the formation of deep states within the perovskite bandgap, resulting in a systematic decrease in solar cell performance. However, further purification (through sublimation) of the C 60 to 99.95% before evaporation is found to hinder coalescence, with the associated solar cell performances being fully reproducible after repeated processing. We verify the universality of this behavior on perovskite/silicon tandem solar cells by demonstrating their open-circuit voltages and fill factors to remain at 1950 mV and 81% respectively, over eight repeated processes using the same sublimed C 60 source material. Notably, one of these cells achieved a certified power conversion efficiency of 30.9%. These findings provide insights crucial for the advancement of perovskite photovoltaic technologies towards scaled production with high process yield.

What problem does this paper attempt to address?

### Problems the Paper Aims to Solve The paper aims to address the issue of performance instability during the thermal evaporation of C60 in the preparation of perovskite-based solar cells (PSCs). Specifically, the study found that commercial C60 source materials tend to aggregate during multiple thermal evaporations, leading to a decline in device performance. This aggregation is caused by oxygen in the initial powder, forming deep-level defect states that affect the performance of the solar cells. To overcome this issue, researchers improved the purity of C60 through further purification (via sublimation), achieving stability and reproducibility in device performance. ### Main Findings 1. **C60 Aggregation Issue**: - Commercial C60 source materials tend to aggregate during multiple thermal evaporations, leading to performance decline. - Aggregation is caused by oxygen in the initial powder, forming deep-level defect states that affect device performance. 2. **Purification Method**: - Further purification of C60 through vacuum thermal gradient sublimation increased its purity to 99.95%. - The purified C60 maintained stable performance during multiple depositions without aggregation. 3. **Performance Verification**: - Single-junction and tandem perovskite solar cells prepared with purified C60 maintained high open-circuit voltage and fill factor after multiple depositions. - One of the devices achieved a certified power conversion efficiency of 30.9%. ### Conclusion The study reveals the cause of performance instability of C60 during multiple thermal evaporations and proposes an effective solution by further purifying C60 through sublimation. These findings are significant for promoting the industrial production of perovskite photovoltaic technology, aiding in the realization of high-yield large-scale production.

Sublimed C60 for efficient and repeatable perovskite-based solar cells

Loading Precursors into Self‐Assembling Contacts for Improved Performance and Process Control in Evaporated Perovskite Solar Cells

Interface Engineering of C60/ Fluorine Doped Tin Oxide on the Photovoltaic Performance of Perovskite Solar Cells Using the Physical Vapor Deposition Technique

Combined Vacuum Evaporation and Solution Process for High‐Efficiency Large‐Area Perovskite Solar Cells with Exceptional Reproducibility

Precursor formula engineering enabling high quality solution processed C60 films for efficient and stable inverted perovskite solar cells

Comparative Study on TiO 2 and C 60 Electron Transport Layers for Efficient Perovskite Solar Cells

Highly Reproducible Fabrication of Perovskite Films with an Ultrawide Antisolvent Dripping Window for Large‐Scale Flexible Solar Cells

Tailoring Perovskite/C60 Interface by Reactive Passivators for Stable Tandem Solar Cells

A universal co-solvent dilution strategy enables facile and cost-effective fabrication of perovskite photovoltaics

C60 As an Efficient N-Type Compact Layer in Perovskite Solar Cells.

A Multilayered Electron Extracting System for Efficient Perovskite Solar Cells

Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain

Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility

Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

Understanding Performance Limiting Interfacial Recombination in pin Perovskite Solar Cells

Enhanced optoelectronic coupling for perovskite-silicon tandem solar cells

Molten Salt Strategy for Reproducible Evaporation of Efficient Perovskite Solar Cells

A Catalyst-Like System Enables Efficient Perovskite Solar Cells

Application of Cesium on the Restriction of Precursor Crystallization for Highly Reproducible Perovskite Solar Cells Exceeding 20% Efficiency

Efficient Micrometer Thick Bifacial Perovskite Solar Cells