Abstract:LiNi0.8Co0.15Al0.05O2 (LNCA) cathode materials have an extremely high energy density, which can greatly enhance the driving range of pure electric vehicles if they are used in on-board batteries. However, the development of the LNCA cathode material is restricted by the expensive transition metal cobalt (Co). Therefore, researchers are devoted to finding other metals to replace Co to synthesize nickel (Ni)-rich Co-free materials to reduce the cost. To investigate the feasibility of replacing Co with manganese (Mn) as a transition metal, this paper reports the synthesis and compares the properties of four Ni-rich materials with different Co–Mn contents by gradually adding Mn to LNCA materials and reducing the Co content in equal amounts using an oxalic acid coprecipitation method. The results show that Mn can compensate the effect of Co deficiency to a certain extent; it is feasible to use Mn to completely replace Co in the synthesis of Ni-rich ternary Co-free materials under the premise of sacrificing a certain initial specific capacity. The tetrameric material LiNi0.8Co0.1Mn0.05Al0.05O2 substituted with trace amounts of Mn exhibited the most excellent electrochemical properties among the four synthesized materials. Therefore, to synthesize satisfactory Ni-rich Co-free materials, it is suggested to develop and synthesize quaternary Co-free materials on the basis of LiNi0.8Co0.1Mn0.05Al0.05O2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c01292?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c01292</a>.Corresponding EDS images of LiNi0.8Co0.15–xMnxAl0.05O2 (x = 0/0.05/0.1/0.15) cathode materials, XPS patterns of LiNi0.8Co0.15–xMnxAl0.05O2 (x = 0/0.05/0.1/0.15) cathode materials, differential curves for first to third cycles of LiNi0.8Co0.15–xMnxAl0.05O2 (x = 0/0.05/0.1/0.15) cathode materials, the dQ/dV plot extracted from the charge/discharge curve at 0.1C of LiNi0.8Co0.15–xMnxAl0.05O2 (x = 0/0.05/0.1/0.15) half-cells in the range of 2.8–4.4 V, and XPS data of Mn 2p and Co 2p for LiNi0.8Co0.15–xMnxAl0.05O2 (x = 0/0.05/0.1/0.15) cathode materials (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c01292/suppl_file/ae1c01292_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Influence of M/A substitution on material properties of intermetallic compounds MSn$_2$ (M = Fe, Co; A = Li, Na): A first-principles study

First-principles calculations of SnCo as potential anode materials for high-performance lithium-ion batteries and beyond

A study on the structure and electrochemical properties of La 2Mg(Ni0.95M0.05)9 (M = Co, Mn, Fe, Al, Cu, Sn) hydrogen storage electrode alloys

A lithiation/delithiation mechanism of monodispersed MSn5 (M = Fe, Co and FeCo) nanospheres

Unraveling the Evolution of Transition Metals during Li Alloying–Dealloying by In-Operando Magnetometry

Different Effects of Al Substitution for Mn or Fe on the Structure and Electrochemical Properties of Na0.67Mn0.5Fe0.5O2 as a Sodium Ion Battery Cathode Material.

In Operando magnetometry study on the charge storage mechanism of SnCo alloy lithium ion batteries

Understanding the Feasibility of Manganese Substitution for Cobalt in the Synthesis of Nickel-Rich and Cobalt-Free Cathode Materials

Unraveling the Role of Li and Mg Substitution in Layered Sodium Oxide Cathodes for Sodium-Ion Batteries

Understanding the mechanism of performance difference when substituting Al for different transition metal ions in Li-rich Mn-based cathode materials

Study on electrochemical performance of Al-substitution for different cations in Li-rich Mn-based materials

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

First‐principles study of high‐entropy sulfides and their alkali metal‐doped modification as cathode material for sodium‐ion batteries

Abinitio Study of the Structural and Electronic Properties of Al/Mg-doped NaMO2 (M = V, Cr and Ni) for Sodium-Ion Batteries Application

Alkali and Alkaline Ions Co-Substitution of P2 Sodium Layered Oxides for Sodium Ion Batteries

Mixed eldfellite compounds \ce{Na(Fe_{1/2}M_{1/2})(SO4)2} (M = Mn, Co, Ni): A new family of high electrode potential cathodes for the sodium-ion battery

Nanospheres of a New Intermetallic FeSn5 Phase: Synthesis, Magnetic Properties and Anode Performance in Li-ion Batteries

Crystalline structure and electrical conductivity of nickel substituted spinel lithium manganese oxide

Comment on "Structure Prediction of Li-Sn and Li-Sb Intermetallics for Lithium-Ion Batteries Anodes''

Alkali Metal Substitution Effects in Mg1−xAxB2 (a=li and Na)

In-situ Synchrotron X-ray Absorption Studies of LiMn0.25Fe0.75PO4 As a Cathode Material for Lithium Ion Batteries