Abstract:Li-ion batteries (LIBs) have demonstrated great promise in electric vehicles and hybrid electric vehicles. However, commercial graphite materials, the current predominant anodes in LIBs, have a low theoretical capacity of only 372 mAh·g-1, which cannot meet the ever-increasing demand of LIBs for high energy density. Nanoscale Si is considered an ideal form of Si for the fabrication of LIB anodes as Si-C composites. Synthesis of nanoscale Si in a facile, cost-effective way, however, still poses a great challenge. In this work, nanoscale Si was prepared by a controlled magnesiothermic reaction using diatomite as the Si source. It was found that the nanoscale Si prepared under optimized conditions (800°C, 10 h) can deliver a high initial specific capacity (3053 mAh·g-1 on discharge, 2519 mAh·g-1 on charge) with a high first coulombic efficiency (82.5%). When using sand-milled diatomite as a precursor, the obtained nanoscale Si exhibited a well-dispersed morphology and had a higher first coulombic efficiency (85.6%). The Si-C (Si: graphite = 1:7 in weight) composite using Si from the sand-milled diatomite demonstrated a high specific capacity (over 700 mAhg"1 at 100 mAg"1), good rate capability (587mAh·g-1 at 500 mA·g-1), and a long cycle life (480 mAh·g-1 after 200 cycles at 500 mA·g-1). This work gives a facile method to synthesize nanoscale Si with both high capacity and high first coulombic efficiency.

Spontaneous formation of the conformal carbon nanolayer coated Si nanostructures as the stable anode for lithium-ion batteries from silica nanomaterials

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

Spontaneous nanominiaturization of silicon microparticles with structural stability as flexible anodes for lithium ion batteries

Designed Formation of Yolk–Shell-Like N-Doped Carbon-Coated Si Nanoparticles by a Facile Method for Lithium-Ion Battery Anodes

Carbon-Coated Si Nanosheets as Anode Materials for High-Performance Lithium-Ion Batteries

Carbon-coated mesoporous silicon shell-encapsulated silicon nano-grains for high performance lithium-ion batteries anode

Carbon-Coated, Diatomite-Derived Nanosilicon as a High Rate Capable Li-ion Battery Anode

Si/C Composite Embedded Nano-Si in 3D Porous Carbon Matrix and Enwound by Conductive CNTs As Anode of Lithium-Ion Batteries

Controlled synthesis of nanosized Si by magnesiothermic reduction from diatomite as anode material for Li-ion batteries

The preparation of carbon-coated Si nanofiber deposited on carbon nanofiber/natural microcrystalline graphite as the anode for lithium-ion batteries

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Highly Stable Carbon Coated Mg2Si Intermetallic Nanoparticles for Lithium-Ion Battery Anode

Building sandwich-like carbon coated Si@CNTs composites as high-performance anode materials for lithium-ion batteries

A submicron Si@C core-shell intertwined with carbon nanowires and graphene nanosheet as a high-performance anode material for lithium ion battery

Constructing three-dimensional N-doped carbon coating silicon/iron silicide nanoparticles cross-linked by carbon nanotubes as advanced anode materials for lithium-ion batteries

Silicon particles confined in carbon nanotubes anode materials by green utilization of carbon dioxide in lithium-ion battery

Self-sacrificial-reaction guided formation of hierarchical electronic/ionic conductive shell enabling high-performance nano-silicon anode

High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

Carbon-Coated Sio(2) Nanoparticles As Anode Material for Lithium Ion Batteries