Abstract:The development of perovskite solar cells (PSCs) has progressed rapidly because of their high efficiency and low cost. The performance of PSCs is predominantly determined by the quality of the perovskite films, which is controlled by the fabrication process. The comprehensive and in-depth understanding of the nucleation, crystallization, and growth process are imperative for the further advancement of large-scale manufacturing of high-quality perovskite films. In this work, the simple process parameters of perovskite thin films were systematically optimized at ambient air, such as containing the thickness of the perovskite thin film, the anti-solvent bath, and the thermal annealing time. Through these simple processes, the wet film, solvent volatilization, and crystallization of perovskite films can be controlled and optimized. After optimizing the spraying conditions, the champion power conversion efficiency (PCE) of the PSCs achieved 20.6% (reverse scan) and had little hysteresis in the current density–voltage (J–V). In addition, the unsealed device retained 85% of its original PCE and showed excellent long-term stability after 650 h of storage in the drying tower.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01129?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01129</a>.VTFL equation for SCLC, SCLC curves of spray-coated perovskite films with different thicknesses, microscopic pictures of perovskite films prepared based on different solvent ratios of DMF to NMP and different anti-solvents, optical photos of perovskite films prepared based on different solvent ratios of DMF to NMP and different anti-solvents, top view of AFM images for the spray-coated perovskite film of different anti-solvent processing times, J–V curves of 1 cm2 PSC on the rigid substrate prepared by the ultrasonic spraying method, and the PCE distribution histogram of rigid PSCs based on 18 devices (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01129/suppl_file/ae0c01129_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Scalable Post-Treatment for Improved Self-Assembled Monolayer Coverage in Perovskite Solar Cells

Enhancing Efficiency of Industrially‐Compatible Monolithic Perovskite/Silicon Tandem Solar Cells with Dually‐Mixed Self‐Assembled Monolayers

Compact Hole‐selective Self‐assembled Monolayers Enabled by Disassembling Micelles in Solution for Efficient Perovskite Solar Cells

Co-adsorbed self-assembled monolayer enables high-performance perovskite and organic solar cells

Reconfiguration toward Self‐Assembled Monolayer Passivation for High‐Performance Perovskite Solar Cells

Facile post‐treatment of self‐assembled monolayers for efficient inverted perovskite solar cells

Stereo‐Hindrance Induced Conformal Self‐Assembled Monolayer for High Efficiency Inverted Perovskite Solar Cells

Superior Textured Film and Process Tolerance Enabled by Intermediate-State Engineering for High-Efficiency Perovskite Solar Cells

Interface Engineering for Efficient ETL-free Perovskite Solar Cells Via Self-Assembled Bifunctional Monolayer

Modification of Energy Levels by Cetyltrimethylammonium Bromide at the Perovskite/Carbon Interface for Highly Efficient and Stable Perovskite Solar Cells

Applications of Self‐Assembled Monolayers for Perovskite Solar Cells Interface Engineering to Address Efficiency and Stability

Surface treatment of the perovskite via self-assembled dipole layer enabling enhanced efficiency and stability for perovskite solar cells

High Efficiency over 20% of Perovskite Solar Cells by Spray Coating via a Simple Process

Efficient Planar Perovskite Solar Cells with Low-Temperature Atomic Layer Deposited TiO2 Electron Transport Layer and Interfacial Modifier

Reconstruction of the Indium Tin Oxide Surface Enhances the Adsorption of High‐Density Self‐Assembled Monolayer for Perovskite/Silicon Tandem Solar Cells

Enhancing Surface Modification and Carrier Extraction in Inverted Perovskite Solar Cells via Self-Assembled Monolayers

Efficient and Stable CuSCN-based Perovskite Solar Cells Achieved by Interfacial Engineering with Amidinothiourea

Post‐Assembled Alkylphosphonic Acids for Efficient and Stable Inverted Perovskite Solar Cells

Repairing Interfacial Defects in Self-Assembled Monolayers for High-Efficiency Perovskite Solar Cells and Organic Photovoltaics through the SAM@Pseudo-Planar Monolayer Strategy

Mixed self‐assembled hole‐transport monolayer enables simultaneous improvement of efficiency and stability of perovskite solar cells

Interfacial Post-Treatment for Enhancing the Performance of Printable Carbon-Based Perovskite Solar Cells