Abstract:The lightweight lattice structures with excellent mechanical properties have great potential for application in aerospace. It is very effective to maximize the energy-absorption (EA) of Dual-Phase Lattice (DPL) structures by controlling the specified shear-banding path. Thus, the controlling of shear-banding path and strengthening mechanisms in DPL with hybrid outer- and inner-Reinforcement Phase (RP) are revealed. Several typical DPLs with different RP (i.e., Octet with larger diameter and hybridization of Octet+BccZ+SC) are designed. Comparisons of DPL with Outer-RP 1 , Inner-RP 1 and their hybridization are also studied. With the efficient numerical model validated by available experiments, compressive behaviors of the proposed DPL are predicted and analyzed. The specific energy absorption of the Octet-D-1-1' and Octet-D-2-2' is 8.3% and 9.2% higher than that of the Octet-D-1 and Octet-D-2. In terms of strength value, Octet-D-2-2' is twice as high as Octet-D-2, and the strengthening effect is obvious. Compared with Octet-D-3, the relative density of Octet-D-2-2' is 0.6% lower, the SEA value is 8% higher, the strength is 34% higher, and the stiffness value is almost the same. It is indicated that the configuration and spatial position of RP have a significant effect on compressive properties of DPL, and hybridization of Outer- and Inner-RP 1 presents the highest strength and SEA. The contributions to EA of DPL are attributed to longer spatial shear-banding path, which produces a hybridization effect on EA of matrix-phase induced by RP. Inspired by dislocation theory, the dislocation detour mechanism and the formation of enhanced interface are revealed to explain the strengthening mechanisms based on shear-banding controlling. It is demonstrated that it is effective to control the shear-banding path to achieve controllable mechanical properties. The novel concept and structural design greatly contribute to controllable mechanical design of lattice.

Energy Absorption Capability of Graded Hybrid Triply Periodic Minimal Surface Structures Based on Fracture Zone Controlling

Controllable Three-Dimension Auxetic Structure Design Strategies Based on Triply Periodic Minimal Surfaces and Dual Period Deformation Function

Mechanical and energy absorption properties of functionally graded lattice structures based on minimal curved surfaces

Energy absorption of gradient triply periodic minimal surface structure manufactured by stereolithography

A Novel Auxetic 3D Lattice Structure for Enhancing Energy Absorption

Compression and resilient behavior of graded triply periodic minimal surface structures with soft materials fabricated by fused filament fabrication

Enhancement in the mechanical behaviour of a Schwarz Primitive periodic minimal surface lattice structure design

Design of New Energy-Absorbing Lattice Cell Configuration by Dynamic Topology Optimization

Multi-dimensional hybridized TPMS with high energy absorption capacity

Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading

Dynamic compressive behavior of functionally graded triply periodic minimal surface cellular structures

Design and additive manufacturing of a modified face-centered cubic lattice with enhanced energy absorption capability

Influence Mechanism of Cell-arrangement Strategy on Energy Absorption of Dual-phase Hybrid Lattice Structure

Study on the Energy Absorption Performance of Triply Periodic Minimal Surface (TPMS) Structures at Different Load-Bearing Angles

Design and Strengthening Mechanisms of Dual-Phase Lattice Energy-Absorbing Structure Based On Shear-Banding Controlling

Mechanisms of Low-Frequency Bandgap Formation and Energy Absorption of Three-Dimensional Nested Hybrid Lattice Structures

Energy absorption and impact resistance of hybrid triply periodic minimal surface (TPMS) sheet-based structures

Additive-manufactured hierarchical multi-circular lattice structures for energy absorption application

Mechanical responses of sheet-based gyroid-type triply periodic minimal surface lattice structures fabricated using selective laser melting

Double-Level Energy Absorption of 3D Printed TPMS Cellular Structures Via Wall Thickness Gradient Design

Introducing a new hybrid surface strut-based lattice structure with enhanced energy absorption capacity