Effect of biochar chemical modification (acid, base and hydrogen peroxide) on contaminants content depending on feedstock and pyrolysis conditions
Monika Hawryluk-Sidoruk,Monika Raczkiewicz,Patrycja Krasucka,Wenyan Duan,Ondřej Mašek,Robert Zarzycki,Rafał Kobyłecki,Bo Pan,Patryk Oleszczuk
DOI: https://doi.org/10.1016/j.cej.2023.148329
IF: 15.1
2024-01-13
Chemical Engineering Journal
Abstract:The effect of biochars (BCs) chemical modifications on the content of various contaminants is poorly studied and understood, despite the fact that such results would be important in terms of estimating the safety of BCs application. The aim of this study was to evaluate the content of different types of contaminants - heavy metals (HMs), polycyclic aromatic hydrocarbons (solvent extractable - C tot and freely dissolved - C free PAHs) and environmentally persistent free radicals (EPFRs) in post-pyrolytic chemically modified (HNO 3 , KOH and H 2 O 2 ) BCs produced under diverse conditions (temperature and carrier gas) and from various feedstocks (willow, rice husk, sewage sludge, oil seed rape straw, wheat straw). The physio-chemical properties of BCs were determined (such as morphology, elemental composition and chemical state, and crystalline structure) and correlated with contaminants content. Regardless of the BCs type, acid modification reduced HMs and C tot PAHs the most effectively but simultaneously increased C free PAHs and EPFRs content (compared to pristine BCs). Changes in contaminant content after H 2 O 2 and alkali treatment were more varied and strictly related to the physio-chemical properties of BCs (such as porosity, DOC, and polarity). H 2 O 2 treatment reduced C tot and C free PAHs content but was less effective than acid modification. In contrast, KOH treatment significantly increased the C tot in most BCs, which depends mainly on porosity and DOC changes. Also, the reduction in HMs content and increase in EPFR after alkali and H 2 O 2 treatment were less substantial and more differentiated by BC origin than after acid modification.
engineering, chemical, environmental