Abstract:In the decommissioning of nuclear facilities, it is necessary to assess the radioactivity inventory for waste classification and management. For nuclear fusion experiments or accelerator-driven neutron sources, the main contribution to the radiological inventory comes from activation products and tritium. When water is used as coolant of components, it may be activated by neutrons with the consequent production of tritium, and short-lived oxygen and nitrogen isotopes. In most cases several chemical elements may be in solution or suspension in water, because of metallic pipes corrosion when occurring, or functional reasons, e.g. chemical conditioning, addition of antifreeze agent, etc. In this case other activation products could be present and need to be characterized. In this case study, a sample of the coolant of the ENEA Frascati Neutron Generator (FNG) has been radiologically, chemically and physically characterized. In such a facility, during the operation, a beam of deuterons is accelerated up to 300 keV and impacts on a tritiated target for producing 14 MeV neutrons exploiting the fusion reaction T(d,n)α. To avoid overheating in the area around the target, a water-cooling loop is used. After several years of operation, a sample of the fluid has been extracted to undergo a qualitative and quantitative analysis of the radionuclides inventory. Gamma spectrometry has not shown any presence of gamma emitters. On the other hand, Liquid Scintillation Counting (LSC) has provided evidence of the presence of beta emitters. It is known that tritium is expected to occur in the sample because of releases from the tritiated titanium target. This work concerns the development of a method to discriminate the tritium contribution with respect to the total beta activity within the FNG coolant. Since it is known that an unspecified percentage of an unknown anticorrosive agent was added to the water coolant, vacuum distillation has been used to extract purified water (containing only tritium) from the coolant sample leaving any (activated) non-volatile compound in the undistilled fraction. After distillation, any fraction has been investigated by Raman spectroscopy, to determine: a) the chemical composition of the colored anticorrosive agent, b) the efficiency of the separation. Afterwards, both fractions have been analysed by means of LSC, and results showed that the main contribution to sample activity is due to tritium and the activity values are consistent with the theoretical H atomic concentration in both fractions.

Isotopic signature of selected lanthanides for nuclear activities profiling using cloud point extraction and ICP-MS/MS

Simultaneous determination of femtogram levels of 237Np, 239Pu, and 240Pu in environmental solid samples using extraction chromatography and ICP-MS/MS

Mass spectrometry for the determination of fission products 135Cs, 137Cs and 90Sr: A review of methodology and applications

Determination of the 243 Cm/244 Cm ratio alpha spectrometry and spectral deconvolution in environmental samples exposed to discharges from the nuclear fuel cycle

Improvements in low-level radionuclide measurement capability through use of the Apex Q sample introduction system combined with ICP-MS/MS

Improved radiocesium purification in low-level radioactive soil and sediment samples prior to 135Cs/137Cs ratio measurement by ICP-MS/MS

Sensitive redox speciation of iron, neptunium, and plutonium by capillary electrophoresis hyphenated to inductively coupled plasma sector field mass spectrometry

A simple method for Ce–Nd separation using nano-NaBiO3: Application in the isotopic analysis of U, Sr, Pb, Nd, and Hf in uranium ores

Simultaneous determination of radiocesium ((135)Cs, (137)Cs) and plutonium ((239)Pu, (240)Pu) isotopes in river suspended particles by ICP-MS/MS and SF-ICP-MS.

Determination of uranium isotopes in marine sediments and seawaters by SF ICP-MS after rapid chemical separation using TK200 resin

Direct method for the quantitative analysis of surface contamination on ultra-low background materials from exposure to dust

Characterization of typical transuranic nuclides in a reference fallout material using SF-ICP-MS

Rapid Method to Determine 137cs, 237np, and Pu Isotopes in Seawater by SF-ICP-MS.

Optimization of analytical conditions for precise and accurate isotope analyses of Li, Mg, Fe, Cu, and Zn by MC-ICPMS

A simplified instrumental protocol for trace Nd and Hf isotope measurements (<10 ng) using a MC-ICP-MS and an Apex Omega de-solvating system

Rapid Method for Sequential Determination of Pu and Am in Soil and Sediment Samples by Sector-Field Inductively Coupled Plasma Mass Spectrometry

Rapid determination of plutonium isotopes in small samples using single anion exchange separation and ICP-MS/MS measurement in NH3–He mode for sediment dating

Determination of Pu isotope concentrations and isotope ratio by inductively coupled plasma mass spectrometry: a review of analytical methodology

Pure Beta Emitters in Water Samples from Neutron Irradiation Facilities: Activity Determination Via Vacuum Distillation and Liquid Scintillation Counting

A chemical separation procedure using ionic liquid extraction for 59 Fe and 55 Fe quantification

Evaluation of SNOLAB background mitigation procedures through the use of an ICP-MS based dust monitoring methodology