Abstract:Purpose This paper aims to introduce a new design concept for robotic manipulator driven by the special two degrees of freedom (DOF) joints. Joint as a basic but essential component of the robotic manipulator is analysed emphatically. Design/methodology/approach The proposed robotic manipulator consists of several two-DOF joints and a rotary joint. Each of the two-DOF joints consists of a cylinder pairs driven by two DC motors and a universal joint (U-joint). Both kinematics of the robotic manipulator and the two-DOF joint are analysed. The influence to output ability of the joint in terms of the scale effect of the inclined plane is analysed in ADAMS simulation software. The contrast between the general and the proposed two-DOF joint is also studied. Finally, a physical prototype of the two-DOF joint is developed for experiments. Findings The kinematic analysis indicates that the joint can achieve omnidirectional deflection motion at a range of ±50° and the robotic manipulator can reach a similar workspace in comparison to the general robotic manipulator. Based on the kinematic analysis, two special motion modes are proposed to endow the two-DOF joint with better motion capabilities. The contrast simulation results between the general and the proposed two-DOF joints suggest that the proposed joint can perform better in the output ability. The experimental results verify the kinematic analysis and motion ability of the proposed two-DOF joint. Originality/value A new design concept of a robotic manipulator has been presented and verified. The complete kinematic analysis of a special two-DOF joint and a seven-DOF robotic manipulator have been resolved and verified. Compared with the general two-DOF joint, the proposed two-DOF joint can perform better in output ability.

Design of a 2-DOF spatial linkage mechanism

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Design and Accuracy for POGO Stick with Three-Axis

Design And Kinematic Analysis Of A 2-Dof Spatial Parallel Mechanism With Flexible Orientation Capability

Design and Kinematic Analysis of a 3-Translational-dof Spatial Parallel Mechanism Based on Polyhedra

Design of a Spatial Translation Mechanism by Optimizing Spatial Ground Structures and Its Kinematic Analysis

Design and Kinematic Analysis of a New 3-DOF Hybrid Mechanism

Optimal Design of a Novel High Speed and High Precision 3-DOF Manipulator

Analysis and design of spatial compliant mechanisms using a 3-D dynamic stiffness model

Design principles and kinematic analysis of a novel spherical 2-degree-of-freedom (DOF) parallel mechanism

Mechanism Design and Kinematic Analysis of a Robotic Manipulator Driven by Joints with Two Degrees of Freedom (DOF).

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

Analysis and Application of a 2-DOF Planar Parallel Mechanism

Kinematic Optimization of a Five Degrees-of-Freedom Spatial Parallel Mechanism With Large Orientational Workspace

Optimal Design of Dynamic and Control Performance for Planar Manipulator

Design of a novel 3-DoF parallel kinematic mechanism: type synthesis and kinematic optimization.

Design and Analysis of a Planar 3-DOF Large Range Compliant Mechanism with Leaf-Type Flexure.

Kinematic design and analysis of a 6-DOF spatial five-Bar linkage

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

Motion paths finding for multi-degree-of-freedom mechanisms