Abstract:Choose your path: Two strategies are explored for the upgrading of 5‐hydroxymethylfurfural (HMF) by hydrogenation/hydrogenolysis in batch multiphase and continuous‐flow systems. To the best of our knowledge, the present work constitutes the first example on the synthesis of 1‐hydroxyhexane‐2,5‐dione employing an ionic liquid‐assisted multiphase system, not only reaching high conversion and selectivity but also allowing catalyst/product separation. The hydrogenation/hydrogenolysis of 5‐hydroxymethylfurfural (HMF) has been carried out either under single (aqueous) phase or batch multiphase (MP) conditions using mutually immiscible aqueous/hydrocarbon phases, 5 % Ru/C as a catalyst, and both with and without the use of trioctylmethyl phosphonium bis‐(trifluoro methane) sulfonimide ([P8881][NTf2]) as an ionic liquid (IL). Alternatively, the hydrogenation of HMF was explored in the continuous‐flow (CF) mode with the same catalyst. By changing reaction parameters, experiments were optimized towards the formation of three products: 2,5‐bis(hydroxy methyl)furan (BHMF), 2,5‐bis(hydroxymethyl)tetrahydrofuran (BHMTHF), and 1‐hydroxyhexane‐2,5‐dione (HHD), which were obtained in up to 92, 90, and 99 % selectivity, respectively, at quantitative conversion. In particular, the single (aqueous) phase reaction of HMF (0.2 m) carried out for 18 h at 60 °C under 30 bar of H2, allowed the exclusive synthesis of BHMF from the partial (carbonyl) hydrogenation of HMF, while the MP reaction run at a higher T and p (100 °C and 50 bar) proved excellent to achieve only HHD derived from a sequence of hydrogenation/hydrogenolysis. It is worth noting that under MP conditions, the catalyst was perfectly segregated in the IL, where it could be recycled without any leaching in the aqueous/hydrocarbon phases. Finally, the hydrogenation of HMF was explored in a H‐Cube® flow reactor in the presence of different solvents, such as ethyl acetate, tetrahydrofuran, and ethanol. At 100 °C, 50 bar H2, and a flow rate of 0.1 mL min−1, the process was optimized towards the formation of the full hydrogenation product BHMTHF. Ethyl acetate proved the best solvent.

Catalytic Hydrotreatment of Humins in Mixtures of Formic Acid/2-Propanol with Supported Ruthenium Catalysts

Valorization of Humins into Furanyl Functionalized Biochar for Selective Hydrogenation of Five-Member Rings of Furan Compounds

Catalytic Hydrotreatment of Humins to Bio-Oil in Methanol over Supported Metal Catalysts

Hydrogenation of Furfural over Ruthenium Catalysts Supported on Porous Aromatic Frameworks

Selective Hydrogenation of 5-Hydroxymethylfurfural to 1-Hydroxy-2,5-hexanedione by Biochar-Supported Ru Catalysts

Defect engineering of single-walled carbon nanohorns for stable electrochemical synthesis of hydrogen peroxide with high selectivity in neutral electrolytes

Valorization of humin as a glucose derivative to fabricate a porous carbon catalyst for esterification and hydroxyalkylation/alkylation

Optimization and reaction kinetics of catalytic transfer hydrogenation of 5‐hydroxymethylfurfural to 2, 5‐dimethylfuran over CuCoOx catalysts

Ultra‐Dense Supported Ruthenium Oxide Clusters Via Directed Ion Exchange for Efficient Valorization of 5‐Hydroxymethylfurfural

Mechanistic Investigations on the Catalytic Transfer Hydrogenation of Lignin-Derived Monomers over Ru Catalysts: Theoretical and Kinetic Studies

Nitrogen-doped ordered mesoporous carbon supported ruthenium metallic nanoparticles: Opportunity for efficient hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran by catalytic transfer hydrogenation

Selective hydrogenolysis of 5-hydroxymethylfurfural to 2,5-dimethylfuran with high yield over bimetallic Ru-Co/AC catalysts

Valorization of humin-based byproducts from biomass processing-a route to sustainable hydrogen

Tuning the Selectivity of the Hydrogenation/Hydrogenolysis of 5‐Hydroxymethylfurfural under Batch Multiphase and Continuous‐Flow Conditions

Conversion of Penta‐Acetyl‐Xylitol to 3‐Acetoxymethylene‐Tetrahydrofuran by a Combined Hetero‐/Homogeneous Tandem Catalyst System

Support Effect of Ru Catalysts for Efficient Conversion of Biomass-Derived 2,5-Hexanedione to Different Products

Enhanced ruthenium selectivity for the conversion of FAMEs to diesel-range alkanes by surface decoration of FeO x species

Cs-substituted Tungstophosphate-Supported Ruthenium Nanoparticles: an Effective Catalyst for the Aerobic Oxidation of 5-Hydroxymethylfurfural into 5-Hydroxymethyl-2-furancarboxylic Acid

Immobilised Ruthenium Complexes for the Electrooxidation of 5‐Hydroxymethylfurfural

Temperature-Controlled Selectivity of Hydrogenation and Hydrodeoxygenation in the Conversion of Biomass Molecule by the Ru1/mpg-C3N4 Catalyst

Catalytic Oxidation of Biomass Derived 5-Hydroxymethylfurfural (HMF) over Ru III -Incorporated Zirconium Phosphate Catalyst