Abstract:Abstract The presence of non-biodegradable dyes, such as Remazol Brilliant Blue R (Reactive Blue 19), in wastewater poses a significant environmental challenge. This study investigates the application of electrocoagulation using iron-aluminum (Fe-Al) electrodes to efficiently remove Reactive Blue 19 dye from simulated textile dye wastewater. It considers various parameters such as electrode material, current, stirring speed, as well as the influence of sodium chloride acting as a supporting electrolyte to enhance conductivity. Additionally, it evaluates the economic feasibility through electrode consumption analysis. The experimental setup involved a designed reactor with aluminum and iron electrodes arranged at bipolar parallel connection, along with a 30-minute electrocoagulation process conducted at ambient temperature and subsequent filtration of the treated wastewater for UV-VIS analysis. The optimal parameter combination obtained consists of Fe-Al electrode material, a 3 A current, and a 200-rpm stirring speed, achieving 96.87% dye removal. Furthermore, extending the operating time to 60 minutes improved the removal by 99.15%. Under these optimal conditions, the energy consumption measured was 36 kWh/m 3 . The high dye removal rate obtained shows the effectiveness of this electrocoagulation process in treating Reactive Blue 19 simulated wastewater. A t-test, employed as a hypothesis testing technique with a significance level of 0.05, confirmed the optimal levels of the factors and interactions within the treatment process. A remarkable coefficient of determination of 0.9794 in the dye removal sensitivity analysis signifies a strong goodness of fit, indicating that these three (3) parameters collectively explain how they affect the outcome while accounting for dye removal efficiency variation. These results showed that electrocoagulation is a promising technology for treatment of Reactive Blue 19 dye wastewater.

Removal of Acid Black 194 dye from water by electrocoagulation with aluminum anode

Electrocoagulation treatment for Remazol Brilliant Blue R (Reactive Blue 19) removal of textile dye simulated wastewater using iron-aluminum electrodes

Electrocoagulation using Ti/Ti for the remediation and reuse of aqueous Dispersive Blue-79

Treatment and reprocessing of textile dyeing wastewater by using the electrocoagulation treatment process

Investigating the removal efficiency of different textile dye classes from wastewater by electrocoagulation using aluminum electrodes

Removal of textile pollutants by electrocoagulation using all bipolar and monopolar connection mode of iron and aluminum composite electrodes

Efficiency assessment of Cu and Al electrodes in the removal of anthraquinone based disperse dye aqueous solution in electrocoagulation–an analytical approach

Removal Efficiency of Acid Red 18 Dye from Aqueous Solution Using Different Aluminium-Based Electrode Materials by Electrocoagulation Process

Environmental Sustainability of the Removal of Alpaca Fiber Dye Using a Thermally Modified Sludge from a Drinking Water Treatment Facility

Treatment of dyeing wastewater with ACF electrodes1Financially supported by The State Key Laboratory of Environmental Aquatic Chemistry, Chinese Academic of Sciences.1

Electrocoagulation process for the decolorization of wastewater containing Reactive Red 195 and CFD simulation of the hydrodynamic in a continuous-flow single-channel reactor

Efficient electrochemical advanced degradation of Red CL and Red WB dyes from the tanning industry using a boron-doped diamond anode

Chemical or electrochemical techniques, followed by ion exchange, for recycle of textile dye wastewater

Electrokinetic removal of aluminum and chromium from industrial wastewater electrocoagulation treatment sludge

Use of a Dual Arrangement of Flow Cells for Electrochemical Decontamination of Aqueous Solutions Containing Synthetic Dyes

Degradation of azo dye Acid Red 14 in aqueous solution by electrokinetic and electrooxidation process.

Investigating the efficiency of electrocoagulation using similar/dissimilar electrodes for the detoxification of Coralene Rubine dye: a cost effective approach

Azo dye removal in a membrane-free up-flow biocatalyzed electrolysis reactor coupled with an aerobic bio-contact oxidation reactor.

Electrocoagulation-Adsorption to Remove Anionic and Cationic Dyes from Aqueous Solution by PV-Energy

Sequential electro-coagulation and electro-Fenton processes for the treatment of textile wastewater

Removal of direct dyes by coagulation: Adaptability and mechanism related to the molecular structure