Abstract:In order to derive the burnup of spent nuclear fuel from the concentration of selected fission products (typically the Nd isotopes and 137Cs), their irradiation-averaged fission yields need to be known with sufficient accuracy, as they evolve with the changes in the actinide vector over the irradiation history. To obtain irradiation-averaged values, radiochemists often resort to robust generic methods – i.e., based on simple mathematical relations – that weight the fission yields according to the actinides contributing to fission, without performing core physics calculations. In order to assess the performance of those generic methods, a database of about 30 000 spent nuclear fuel inventories has been constructed from neutron transport and depletion simulations, covering a representative range of fuel enrichment, burnup, assembly designs and reactor types. When testing several existing methods for effective fission yield calculation, some inaccuracies were identified, originating from improper one-group cross-section parameters that do not accurately reflect resonance and self-shielding effects, and too crude approximations in the estimation of the actinide concentration evolution. Revised effective fission and absorption cross-section parameters are then proposed here, as a first improvement to the earlier burnup determination methods. As a second step, a novel method is proposed that reduces the error on their radiation-averaged fission yield values, and hence on burnup, while retaining a straightforward calculation scheme.

Determination of IRT-2M fuel burnup by gamma spectrometry

Comparison of the neutron energy spectrum and neutron fluence rate in the LVR-15 research reactor with fuel with different enrichment

A Comparison Study on the Burnup of HTR-10 Fuels Using Radiometric and Mass Spectrometric Methods

Spent fuel nondestructive assay integrated characterization from active neutron, passive neutron, and passive gamma

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

Study of the burnup measurement for 10 MW high temperature

Monte Carlo based absolute efficiency calibration of power reactor spent fuel NDA measurements

Neutron cross section measurements for BUC approaches

Burn-up Determination and Accident Testing of HTR-PM Fuel Elements Irradiated in the HFR Petten

Design Consideration of On-line Burnup Measurement System for High Temperature Gas-cooling Reactor: Influence of Cooling Time for Fuel Sphere on Burnup Measurement

Experimental burn-up analysis of ITU Triga Mark II reactor fuel elements

Measurement of the heat power generated by decay of fission products in fuel assemblies of the IEA-R1 research reactor

Evaluation of the irradiation-averaged fission yield for burnup determination in spent fuel assays

Radiochemical Analysis of Spent Nuclear Fuel of VVER-440 Reactor

Isotopic Measurement of HTR-10 Irradiated Fuels Based on Anti-Compton Gamma Spectroscopic Method

Feasibility Studies on the Burnup Measurement of Fuel Pebbles with Hpge Gamma Spectrometer

Evaluation of neutronic parameters for RITM-200 reactor unit considering (238U+235U)O2, (232Th+235U)O2 and (232Th+233U)O2 dispersed fuel using MCU-PTR

Feedback on neutron capture cross-section of 234U from analysis of measured inventories of UO2 fuel irradiated in TMI unit 1

Release of Cs, Sr and Rb from two high–burnup spent nuclear fuels: Effect of the dishing and the internal grain boundaries

Feasibility of Neutron Coincidence Counting for Spent Fuel