Abstract:The CO 2 →CO+1⁄2O 2 conversion experiment [F~A~D'Isa et al. 2020 Plasma Sources Sci. Technol. 29 105009] has been compared with thermo-chemical calculations. The experiment is a 2.45 GHz plasma torch with straight channel in the effluent. The 1.5D model of the CO 2 /CO/O 2 /O/C mixture without turbulent transport has been applied with plasma acting only as prescribed heat source. The parameter range covered is specific energy input (SEI) 0.3-5 eV/molecule at pressure p=0.9 bar, and SEI=0.6-2 eV/molecule at p=0.5, 0.2 bar. The calculated conversion χ is always close to experimental values. At the same time, the calculated temperatures T deviate significantly from the experiment, especially for p=0.2 bar. The calculated T were also found to be sensitive with respect to the uncertain model parameters, but χ is not sensitive. According to the model the net conversion is driven mainly by the radial diffusion of CO and O from the hot core toward the wall and steep radial temperature gradients. The main factor which reduces the energy efficiency is re-oxidation of CO at the edge of the hot plasma region and downstream. The net conversion in the model is driven to large extent by the radial diffusion of CO and O from the hot core toward the wall and steep radial temperature gradients. The main factor which reduces the energy efficiency is re-oxidation of CO at the edge of the hot plasma region and downstream. The 1.5D approximation applied has the principle limitation that the impact of the realistic bulk flow field on the chemical process could not be studied. Hence the results must be considered as preliminary and have to be confirmed with a more elaborate and accurate model of the vortex stabilized flows inside the reactor.

Effects of Mass Flow Rate on the Thermal-Flow Characteristics of Microwave CO2 Plasma

Influences of Sputtering Gas Pressure and Gas Flow Rate on Microwave Characteristics of Fecoalo Thin Films

Performance analysis of a 2.45 GHz microwave plasma torch for CO$_2$ decomposition in gas swirl configuration

Investigation of Flow Boiling Heat Transfer Characteristics of CO2in Horizontal Mini-Tube

Validation of the thermo-chemical approach to modelling of the CO 2 conversion in sub-atmospheric pressure microwave gas discharges

Simulation and Experimental Research Based on Carrier Gas Flow Rate on the Influence of Four-Channel Coaxial Nozzle Flow Field

Characteristics of Heat Transfer for CO2 Flow Boiling at Low Temperature in Mini-Channel

Validation of the thermo-chemical approach to modelling of the CO$_2$ conversion in atmospheric pressure microwave gas discharges

Mechanisms of Gas Temperature Variation of the Atmospheric Microwave Plasma Torch

Influence of energy transfer processes on the rovibrational characteristics of CO2 in low-temperature conversion plasma with Ar and He admixture

Imaging Diagnostics and Gas Temperature Measurements of Atmospheric-Microwave- Induced Air Plasma Torch

Experimental studies and COMSOL 1-D simulation in Ar capacitively coupled plasmas

Optical diagnostics of a low power—low gas flow rates atmospheric-pressure argon plasma created by a microwave plasma torch

Modelling forward vortex flow in a microwave plasma

Effect of Gas Composition on Temperature and CO2 Conversion in a Gliding Arc Plasmatron reactor: Insights for Post‐plasma Catalysis from Experiments and Computation

Effects of Swirling Flow on the Heat Transfer and Flow in a Thermal Plasma Reactor

Quasi-direct numerical simulations of the flow characteristics of a thermal plasma reactor with counterflow jet

Modeling of the Heat Transfer and Flow Features of the Thermal Plasma Reactor with Counter-Flow Gas Injection

Experimental Study on Microwave-Induced Plasma-Assisted Premixed Methane-Air Combustion

Thermodynamic Properties and Transport Coefficients of High-Temperature CO2thermal Plasmas Mixed with C2F4

Experimental and Computational Investigation of Heat Transfer in a Microwave-Assisted Flow System