Regional blood flow after intra-aortic balloon pumping before and after cardiogenic shock.

H. Oster,T. Stanley,D. Olsen,M. Nielsen,W. Kolff

Abstract:

What problem does this paper attempt to address?

Resonance light scattering as a powerful tool for sensitive detection of β-amyloid peptide by gold nanoparticle probes.

Chengke Wang,Dianjun Liu,Zhenxin Wang

DOI: https://doi.org/10.1039/c1cc12939b

IF: 4.9

2011-08-09

Chemical Communications

Abstract:A novel biosensing strategy has been developed for sensitive detection of β-amyloid 1-42 (Aβ(1-42)) down to the ng mL(-1) level in both aqueous solution and diluted human plasma, which is based on measuring changes in resonance light scattering of streptavidin functionalized gold nanoparticles as a function of the concentration of Aβ(1-42) with a conventional spectrofluorometer.
A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Peng Qing,Jue Gong,Xing Lin,Ni Yao,Weidong Shen,Arash Rahimi-Iman,Wei Fang,Limin Tong

DOI: https://doi.org/10.1063/1.5083011

IF: 4

2019-01-01

Applied Physics Letters

Abstract:We report a simple technique for the realization of fiber-based Fabry-Pérot microcavities with large Q/V values as well as high cavity-to-fiber coupling efficiencies. The open microcavity we demonstrate consists of a flat mirror and a concave mirror on the tip of a single mode optical fiber. Combining hydrofluoric acid chemical wet etching with CO2 laser reflow, we obtain a fiber-tip atomically smooth concave surface with a diameter of 4.7 μm determined by the fiber core size. The concave surface with a spherical profile is automatically aligned with the fiber core, which enables high cavity-to-fiber power coupling efficiency (higher than 90%) with an optimal fiber-tip mirror's radius of curvature based on numerical simulation results. After distributed-Bragg-reflector coating, we have realized a wavelength-tunable open microcavity with a quality factor Q exceeding 1000 and a mode volume V of 13.6 μm3, and laser emission is demonstrated from this microcavity.
Fabrication of Optical Cavities with Femtosecond Laser Pulses

Jintian Lin,Jiangxin Song,Jialei Tang,Wei Fang,Koji Sugioka,Ya Cheng

DOI: https://doi.org/10.1117/12.2041353

2014-01-01

Abstract:We report on fabrication of three-dimensional (3D) high-quality (Q) whispering-gallery-mode microcavities by femtosecond laser micromachining. The main fabrication procedures include the formation of on-chip freestanding microdisk through selective material removal by femtosecond laser pulses, followed by surface smoothing processes (CO2 laser reflow for amorphous glass and focused ion beam (FIB) sidewall milling for crystalline materials) to improve the Q factors. Fused silica microcavities with 3D geometries are demonstrated with Q factors exceeding 106. A microcavity laser based on Nd:glass has been fabricated, showing a threshold as low as 69μW via free space continuous-wave optical excitation at the room temperature. CaF2 crystalline microcavities with Q factor of ~4.2×104 have also been demonstrated. This technique allows us to fabricate 3D high-Q microcavities in various transparent materials such as glass and crystals, which will benefit a broad spectrum of applications such as nonlinear optics, quantum optics, and bio-sensing.
Internalization of the Human Nicotinic Acid Receptor GPR109A Is Regulated by Gi, GRK2, and Arrestin3*

Guo Li,Ying Shi,Haishan Huang,Yaping Zhang,Kuangpei Wu,Jiansong Luo,Yi Sun,Jianxin Lu,J. Benovic,N. Zhou

DOI: https://doi.org/10.1074/jbc.M109.087213

IF: 5.485

2010-05-11

Journal of Biological Chemistry

Abstract:Nicotinic acid (niacin) has been widely used as a favorable lipid-lowering drug for several decades, and the orphan G protein-coupled receptor GPR109A has been identified to be a receptor for niacin. Mechanistic investigations have shown that as a Gi-coupled receptor, GPR109A inhibits adenylate cyclase activity upon niacin activation, thereby inhibiting free fatty acid liberation. However, the underlying molecular mechanisms that regulate signaling and internalization of GPR109A remain largely unknown. To further characterize GPR109A internalization, we made a construct to express GPR109A fused with enhanced green fluorescent protein (EGFP) at its carboxyl-terminal end. In stable GPR109A-EGFP-expressing HEK-293 cells, GPR109A-EGFP was mainly localized at the plasma membrane and was rapidly internalized in a dose- and time-dependent manner upon agonist stimulation. GPR109A internalization was completely blocked by hypertonic sucrose, indicating that GPR109A internalizes via the clathrin-coated pit pathway. Further investigation demonstrated that internalized GPR109A was recycled to the cell surface after the removal of agonist, and recycling of the internalized receptors was not blocked by treatment with acidotropic agents, NH4Cl and monensin. Pertussis toxin pretreatment not only inhibited forskolin-induced cAMP accumulation and intracellular Ca2+ mobilization; it also significantly attenuated agonist-promoted GPR109A internalization. Moreover, RNA interference experiments showed that knockdown of GRK2 (G protein-coupled receptor kinase 2) and arrestin3 expression significantly impaired receptor internalization. Taken together, these results indicate that the agonist-induced internalization of GPR109A receptors is regulated by GRK2 and arrestin3 in a pertussis toxin-sensitive manner and that internalized receptor recycling is independent of endosomal acidification.
The relationship of hospital process variables to patient outcome post-myocardial infarction.

Teresita F. Proctor,A. Yarcheski,Ralph G. Oriscello

DOI: https://doi.org/10.1016/0020-7489(95)00056-9

IF: 8.1

1996-04-01

International Journal of Nursing Studies

Abstract:
Universal coupler for bulk whispering gallery mode resonators based on silicon subwavelength grating waveguides

D. Farnesi,S. Pelli,S. Soria,G. Nunzi Conti,X. Le Roux,M. Montesinos Ballester,L. Vivien,P. Cheben,C. Alonso-Ramos

DOI: https://doi.org/10.48550/arXiv.2105.04626

2021-05-11

Abstract:Optical microresonators are of paramount importance in photonic circuits requiring fine spectral filtering or resonant light recirculation. Key performance metrics improve with increasing resonance quality factor (Q) across all applications. The performance of silicon photonic circuits is often hampered by the low-quality factor of planar silicon microresonators, typically of Q~10^4-10^5. On the other hand, bulk whispering gallery mode resonators provide a wide range of materials with intriguing optical properties and exceptionally high resonant quality factors Q>10^7. However, the efficient coupling between bulk resonators and planar Si photonic waveguides is considered challenging, if not impossible, due to remarkably large mismatch in size and refractive index. Here, we show an efficient method to couple bulk resonators and Si waveguides based on subwavelength metamaterial engineering of silicon. Based on this approach, we experimentally demonstrate coupling between 220-nm-thick Si waveguides and bulk microresonators made of silica, lithium niobate and calcium fluoride with diameters in the 0.3-3.5 mm range, achieving high coupling efficiency of 75-99% and exceptional Q of 10^6-10^7. These results open a new route for the heterogeneous integration of bulk resonators and silicon photonic circuits, with great potential for applications in sensing, microwave-photonics, and quantum photonics, to name a few.

Optics
Single-Polarization Fiber-Pigtailed High-Finesse Silica Waveguide Ring Resonator for A Resonant Micro-Optic Gyroscope

Jianjie Zhang,Huilian Ma,Hanzhao Li,Zhonghe Jin

DOI: https://doi.org/10.1364/ol.42.003658

IF: 3.6

2017-01-01

Optics Letters

Abstract:A new record for high-finesse silica waveguide ring resonators (WRRs), to the best of our knowledge, is demonstrated experimentally. The achieved finesse and resonant depths of the silica WRR with a length of 7.9 cm and a diameter of 2.5 cm are 196.7% and 98%, respectively. In addition, the silica WRR chip is coupled with single-polarization fiber to improve the polarization extinction ratio (PER) and, thus, to reduce the polarization error. With the application of this high-finesse and high-PER WRR to the resonant microoptic gyroscope (RMOG), a bias stability of 0.004 degrees/s is observed over a 1 h timeframe. To the best of our knowledge, this is the first RMOG reported in the open literature that can sense the earth's rotation rate (15 degrees/h). (C) 2017 Optical Society of America
Rapid 3D Micro-Printing of Optical Whispering-Gallery Mode Resonators

Jushuai Wu,Xin Guo,A. Ping Zhang,Hwa-yaw Tam

DOI: https://doi.org/10.1364/oe.23.029708

2015-01-01

Abstract:In this paper, we present a novel method for rapidly fabricating polymeric optical whispering-gallery mode (WGM) resonators. A 3D micro-printing technology based on high-power UV light source and high-speed optical spatial modulator (SLM) is developed, and the fabrication and testing of suspended-toroid WGM resonator array are demonstrated in the experiments. The experimental results reveal that the demonstrated method is very flexible and time-saving to quickly fabricate complex WGM resonators.
Efficient optical coupling to gallium arsenide nano-waveguides and resonators with etched conical fibers

Samuel Pautrel,Florent Malabat,Louis Waquier,Martin Colombano,Martina Morassi,Aristide Lemaître,Ivan Favero

2023-10-19

Abstract:We explore new methods for coupling light to on-chip gallium arsenide nanophotonic structures using etched conical optical fibers. With a single-sided conical fiber taper, we demonstrate efficient coupling to an on-chip photonic bus waveguide in a liquid environment. We then show that it is possible to replace such on-chip bus waveguide by two joined conical fibers in order to directly couple light into a target whispering gallery disk resonator. This latter approach proves compliant with demanding environments, such as a vibrating pulse tube cryostat operating at low temperature, and it is demonstrated both in the telecom band and in the near infrared close to 900 nm of wavelength. The versatility, stability, and high coupling efficiency of this method are promising for quantum optics and sensing experiments in constrained environments, where obtaining high signal-to-noise ratio remains a challenge.

Optics
A Whispering-Gallery-Mode Microsphere Resonator on a No-Core Fiber Tip

Jing Liu,W. P. Chen,D. N. Wang,Ben Xu,Z. W. Wang

DOI: https://doi.org/10.1109/lpt.2018.2803060

2018-01-01

Abstract:Here we propose and demonstrate a new type of microsphere whispering gallery mode (WGM) resonator with microsphere-microsphere coupling. The coupler consists of a microsphere attached to a single mode fiber (SMF) tip by use of UV adhesive. The microsphere-microsphere coupling system is robust, compact in size, easy in fabrication and stable in operation and has good Q-factor of 4.72×10 3 . The WGM resonator developed in this work is also explored for vibration measurement.
Recent progress of in-fiber WGM microsphere resonator

Yong Yang,Zijie Wang,Xiaobei Zhang,Qi Zhang,Tingyun Wang

DOI: https://doi.org/10.1007/s12200-023-00066-3

2023-05-25

Abstract:In-fiber whispering gallery mode (WGM) microsphere resonators have received remarkable attention due to the superiorities of compact structure, high stability and self-alignment. As an in-fiber structure, WGM microsphere resonators have been demonstrated in various applications, such as sensors, filters and lasers, which have significant impacts on modern optics. Herein, we review recent progress of in-fiber WGM microsphere resonators, which involve fibers of diverse structures and microspheres of different materials. First, a brief introduction is given to in-fiber WGM microsphere resonators, from structures to applications. Then, we focus on recent progresses in this field, including in-fiber couplers based on conventional fibers, capillaries and micro-structure hollow fibers, and passive/active microspheres. Finally, future developments of the in-fiber WGM microsphere resonators are envisioned.
High-Q Whispering-Gallery-Modes Microresonators in the Near-Ultraviolet Spectral Range

Georges Perin,Yannick Dumeige,Patrice Féron,Stéphane Trebaol

DOI: https://doi.org/10.48550/arXiv.2211.03391

2022-11-07

Abstract:High-$Q$ whispering gallery mode microresonators are cornerstones to develop compact coherent sources like single frequency lasers or frequency combs. This work reports a detailed characterization of a whispering gallery mode microsphere in the near ultraviolet. Light coupling in the resonator is obtain thanks to a robust angle-polished fiber allowing to investigate the different coupling regimes. An intrinsic $Q_0$-factor of $2.2 \times 10^8$ and a finesse of $7.3 \times 10^4$ are reported at a wavelength of 420 nm. Physical mechanisms contributing to the $Q_0$-factor are discussed and routes to improve the performances are drawn. Such high-$Q$ factor and high finesse are key ingredients to ease the study of photonic devices based on WGM microresonators.

Optics
Waveguide-loaded silica fibers for coupling to high-index micro-resonators

P. Latawiec,M. J. Burek,V. Venkataraman,M. Lončar

DOI: https://doi.org/10.1063/1.4940021

IF: 4

2016-01-18

Applied Physics Letters

Abstract:Tapered silica fibers are often used to rapidly probe the optical properties of micro-resonators. However, their low refractive index precludes phase-matching when coupling to high-index micro-resonators, reducing efficiency. Here, we demonstrate efficient optical coupling from tapered fibers to high-index micro-resonators by loading the fibers with an ancillary adiabatic waveguide-coupler fabricated via angled-etching. We demonstrate greatly enhanced coupling to a silicon multimode micro-resonator when compared to coupling via the bare fiber only. Signatures of resonator optical bistability are observed at high powers. This scheme can be applied to resonators of any size and material, increasing the functional scope of fiber coupling.

physics, applied
Whispering gallery mode microlasers and refractive index sensing based on single polymer fiber

DOI: https://doi.org/10.1002/lpor.201370014

2013-01-01

Abstract:The realization of whispering gallery mode (WGM) lasing in polymer fibers is hindered by an appropriate method to dissolve the polymer and the gain material. In this work by Van Duong Ta et al. 10.1002/lpor.201200074 , (pp. 133–139), microfibers fabricated by directly drawing from a dye doped polymer solution are exhibited as high quality microlasers and microsensors. Multimode and even single‐mode lasing is observed from the fiber under optical pumping at room temperature. The linewidth of lasing mode is narrower than 0.09 nm. The lasing mechanism is unambiguously verified by comprehensive spectroscopic analysis and ascribed to WGMs. Diameter‐ and polarization‐dependent lasing characteristics are systematically investigated, showing good agreement with the theoretical calculation. Particularly, application of the fiber laser for refractive index sensing based on resonant shift of lasing mode is demonstrated and the sensitivity up to about 300 nm/RIU is achieved. The promising potential of high quality polymer microfibers as optical sensors and multi‐function components for flexible photonic integrated systems is highly expected. Picture: Whispering gallery mode (WGM) lasing emission (bright ring) is realized from a dye‐doped polymer microfiber. This microlaser can serve as refractive index sensing of tetrahydrofuran (THF) solution based on the interaction of the THF molecules (solid spheres) with evanescent wave of WGM modes. The simulated field distribution of WGMs is inserted inside the fiber.

physics, condensed matter,optics, applied
High‐Q Polymer Microcavities Integrated on a Multicore Fiber Facet for Vapor Sensing

Siyao Zhang,Shui-Jing Tang,Shengfei Feng,Yun-Feng Xiao,Wanyin Cui,Xinke Wang,Wenfeng Sun,Jiasheng Ye,Peng Han,Xinping Zhang,Yan Zhang

DOI: https://doi.org/10.1002/adom.201900602

IF: 9

2019-01-01

Advanced Optical Materials

Abstract:The further development of "lab on fiber" technology demands more powerful optical microsystems and optical fibers with special functions to create sensors with better performance. Whispering gallery microcavities (WGMs) made of different materials with high quality factors show very good sensitivity to gases, nanoparticles, and biocomponents. However, realizing the excitation and detection of the resonant modes of WGMs on the facets of optical fibers is still a great challenge. This work employs the advanced 3D manufacturing technology of two-photon lithography to fabricate an optical microsystem on the end facet of a multicore optical fiber, which enables excitation and detection of whispering gallery modes on the end facet of an optical fiber. Whispering gallery modes with high quality factors are observed, and the sensing characterization of this device for vapors of three types of volatile organic compounds is investigated. Such optical fiber vapor sensors can be applied in the fields of medical care, environmental monitoring and chemical manufacturing. Additionally, the out-of-plane light coupling strategy may be useful for the design of integrated optical circuits on chips.
Down-regulation of autoreactive T-cells by HMG CoA reductase inhibitors.

T. Brumeanu,R. Goldstein,S. Casares

DOI: https://doi.org/10.1016/J.CLIM.2005.11.007

IF: 10.19

2006-04-01

Clinical Immunology

Abstract:
Scatterer assisted whispering gallery mode microprobe

Fangjie Shu,Xuefeng Jiang,Guangming Zhao,Lan Yang

DOI: https://doi.org/10.1515/nanoph-2018-0063

2018-02-28

Abstract:Fiber based whispering-gallery-mode (WGM) microprobe, combining both the high optical field enhancement of the WGMs and the practicability of the fiber probe, is highly demanded in sensing and imaging. Here in this paper, we experimentally report the efficient far-field coupling of WGMs by scattering the focused laser beam through a nanotip. With the help of Purcell effect as well as the two-step focusing technique, a WGM excitation efficiency as high as 16.8% has been achieved. Both the input and output of the probe light propagate along the same fiber, which makes the whole coupling system a fiber based WGM microprobe for sensing/imaging applications.

Optics
Perpendicular Coupler for Standing Wave Excitation and Wavelength Selection in High-Q Silicon Microresonators

Shuai Wan,Fang-Jie Shu,Rui Niu,Guang-Can Guo,Chang-Ling Zou,Chun-Hua Dong

DOI: https://doi.org/10.1364/oe.392989

IF: 3.8

2020-01-01

Optics Express

Abstract:High quality factor (Q) whispering gallery mode (WGM) resonators have been widely applied in photonics, while the excitation and collection of WGMs are mostly restricted to traveling wave coupler. Here, we experimentally demonstrate a novel on-chip perpendicular coupler (PC) for high-Q (∼1.1 × 105) silicon whispering gallery microresonators. The PC is compact and allows efficiently tunneling coupling between the waveguide and the microresonator, hence it holds great potential for fan-out photonic devices. Drastically different from the traveling wave couplers, standing wave mode can be excited through the PC. In addition, a PC working as an output coupler can also selectively collect the resonance of different wavelengths by locating on different azimuth angles. Our results show the feasibility of such novel coupler for WGM resonators and its potential use in future applications of integrated high Q microresonators.
Raman lasing and Fano lineshapes in a packaged fiber-coupled whispering-gallerymode microresonator

Guangming Zhao,Şahin Kaya Özdemir,Tao Wang,Linhua Xu,Gui-lu Long,Lan Yang

DOI: https://doi.org/10.48550/arXiv.1609.02618

2016-09-09

Abstract:We report Raman lasing and the optical analog of electromagnetically-induced-transparency (EIT) in a whispering-gallerymode (WGM) microtoroid resonator embedded in a low refractive index polymer matrix together with a tapered fiber coupler. The Raman laser supports both single and multimode operation with low power thresholds. Observations of Fano and EIT-like pheonomena in a packaged microresonator will enable high resolution sensors and can be used in networks where slow light process is needed. These results open the way for portable, robust, and stable WGM microlasers and laserbased sensors for applications in various environments.

Optics
Integrated table-top facility for the study of Whispering Gallery Modes in dynamic liquid micro-cavities coupled to sub-micron tapered fibers

Meenakshi Gaira,C. S. Unnikrishnan,C.S. Unnikrishnan

DOI: https://doi.org/10.48550/arXiv.1911.01187

2019-11-04

Instrumentation and Detectors

Abstract:A complete integrated table-top facility for the study of high-$Q$ Whispering Gallery Modes in solid and liquid micro-cavities is described, with emphasis on the in situ fabrication of reliable tapered fibers of sub-micron waist sizes for coupling light into time-dependent liquid micro-cavities. The experimental parameters have been chosen to get nearly adiabatic tapers, with their waist size consistent with the theoretical model. The oscillations in the transmitted power during fiber tapering are monitored to check the coupling of higher order modes and identify the point when the fiber is suitable for pure single mode coupling. The fabricated tapered fibers have greater than 85% transmission on the average and very good polarization fidelity. The tapered fibers have been used for efficiently exciting and detecting WGMs of $Q\sim10^7$ in silica microspheres and of $Q$ up to $7\times10^7$ in microdrops of silicone oils.

Regional blood flow after intra-aortic balloon pumping before and after cardiogenic shock.

Resonance light scattering as a powerful tool for sensitive detection of β-amyloid peptide by gold nanoparticle probes.

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Internalization of the Human Nicotinic Acid Receptor GPR109A Is Regulated by Gi, GRK2, and Arrestin3*

The relationship of hospital process variables to patient outcome post-myocardial infarction.

Universal coupler for bulk whispering gallery mode resonators based on silicon subwavelength grating waveguides

Single-Polarization Fiber-Pigtailed High-Finesse Silica Waveguide Ring Resonator for A Resonant Micro-Optic Gyroscope

Rapid 3D Micro-Printing of Optical Whispering-Gallery Mode Resonators

Efficient optical coupling to gallium arsenide nano-waveguides and resonators with etched conical fibers

A Whispering-Gallery-Mode Microsphere Resonator on a No-Core Fiber Tip

Recent progress of in-fiber WGM microsphere resonator

High-Q Whispering-Gallery-Modes Microresonators in the Near-Ultraviolet Spectral Range

Waveguide-loaded silica fibers for coupling to high-index micro-resonators

Whispering gallery mode microlasers and refractive index sensing based on single polymer fiber

High‐Q Polymer Microcavities Integrated on a Multicore Fiber Facet for Vapor Sensing

Down-regulation of autoreactive T-cells by HMG CoA reductase inhibitors.

Scatterer assisted whispering gallery mode microprobe

Perpendicular Coupler for Standing Wave Excitation and Wavelength Selection in High-Q Silicon Microresonators

Raman lasing and Fano lineshapes in a packaged fiber-coupled whispering-gallerymode microresonator

Integrated table-top facility for the study of Whispering Gallery Modes in dynamic liquid micro-cavities coupled to sub-micron tapered fibers