Exploring breadfruit peel waste as a potential source for bio-ethanol production
M. Chithra,K. Rama Krishna,Suchitra Rakesh,A. Ramesh Kumar,M. Manoprabha
DOI: https://doi.org/10.1007/s13399-024-06043-w
IF: 4.05
2024-08-19
Biomass Conversion and Biorefinery
Abstract:Global warming and other environmental hazards are escalating due to the continued reliance on fossil fuels, prompting the investigation of renewable energy sources like bio-ethanol. Bio-ethanol, derived from various agricultural and food industry residues, presents a promising solution to mitigate these environmental threats. The research focuses on producing bio-ethanol from pre-treated breadfruit peel waste utilizing 2% NaOH followed by hydrolysis with 7% H 2 SO 4 and fermentation with Saccharomyces cerevisiae (NCIM 3052). Moreover, this study optimizes the combined impact of temperature (ranging from 25, 30, 35, to 40 °C) and fermentation duration (spanning from 12, 24, 36, 48, 60, to 72 h) on the bio-ethanol production process. Ethanol production was quantitatively measured following the spectrometric method using a UV-Spectrophotometer at 525 nm. A change in structural composition and lignocellulose degradation was determined by scanning electron microscopy-energy dispersive X-ray analysis (SEM–EDX), Fourier-transform infrared spectroscopy (FTIR), and ultra high-performance liquid chromatography (UHPLC) for both treated and untreated biomass. The treated breadfruit peel waste showed the highest levels of reducing sugar content. The most significant ethanol yield (1.0 mg/ml) was observed under conditions of 30 °C (T 2 ) temperature and 60 h (D 5 ) of fermentation, followed closely by 35 °C temperature (T 3 ) with a duration of 72 h (D 6 ), yielding approximately 0.89 mg/ml. In summary, this study suggests employing breadfruit peel waste (BPW) for bio-ethanol production, offering an alternative energy source derived from biomass waste. This approach not only addresses environmental waste disposal issues but also contributes to mitigating bio-fuel energy requirements.
energy & fuels,engineering, chemical