[Carcinogenic working materials exemplified by fibers].

K. Rödelsperger,H. Woitowitz

Abstract:

What problem does this paper attempt to address?

Synthetic silica fibers of different length, diameter and shape: synthesis and interaction with rat (NR8383) and human (THP-1) macrophages in vitro, including chemotaxis and gene expression profile

Nataniel Białas,Nina Rosenkranz,Daniel Gilbert Weber,Kathrin Kostka,Georg Johnen,Aileen Winter,Alexander Brik,Kateryna Loza,Katja Szafranski,Thomas Brüning,Jürgen Bünger,Götz Westphal,Matthias Epple

DOI: https://doi.org/10.1186/s12989-024-00586-6

2024-05-12

Particle and Fibre Toxicology

Abstract:Inhalation of biopersistent fibers like asbestos can cause strong chronic inflammatory effects, often resulting in fibrosis or even cancer. The interplay between fiber shape, fiber size and the resulting biological effects is still poorly understood due to the lack of reference materials.

toxicology
Occupational exposure to carcinogens: Benzene, pesticides and fibers

Luca Falzone,Andrea Marconi,Carla Loreto,Sabrina Franco,Demetrios A. Spandidos,Massimo Libra

DOI: https://doi.org/10.3892/mmr.2016.5791

IF: 3.423

2016-10-03

Molecular Medicine Reports

Abstract:It is well known that the occupational exposure to contaminants and carcinogens leads to the development of cancer in exposed workers. In the 18th century, Percivall Pott was the first to hypothesize that chronic exposure to dust in the London chimney sweeps was associated with an increased risk of developing cancer. Subsequently a growing body of evidence indicated that other physical factors were also responsible for oncogenic mutations. Over the past decades, many carcinogens have been found in the occupational environment and their presence is often associated with an increased incidence of cancer. Occupational exposure involves several factors and the association between carcinogens, occupational exposure and cancer is still unclear. Only a fraction of factors is recognized as occupational carcinogens and for each factor, there is an increased risk of cancer development associated with a specific work activity. According to the International Agency for Research on Cancer (IARC), the majority of carcinogens are classified as 'probable' and 'possible' human carcinogens, while, direct evidence of carcinogenicity is provided in epidemiological and experimental studies. In the present review, exposures to benzene, pesticides and mineral fibers are discussed as the most important cancer risk factors during work activities.

oncology,medicine, research & experimental
Carcinogenic Food Contaminants

Christian C. Abnet

DOI: https://doi.org/10.1080/07357900701208733

2007-01-01

Cancer Investigation

Abstract:A large number of scientific studies and reviews have addressed the potential for dietary components to influence the risk of developing cancer. One topic of particular interest has been the impact of food contaminants. Two complementary programs, among others, have reviewed and synthesized information on the carcinogenic potential of food contaminants and judged the degree of evidence linking different food contaminants to the risk of cancer in humans. These programs, the International Agency for Research on Cancer's IARC Monographs on the Evaluation of Carcinogenic Risks to Humans and the US National Toxicology Program's Report of Carcinogens have reviewed hundreds of chemicals, mixtures, and natural products and then graded the cancer risk posed to humans. Contaminants with the highest level of evidence include aflatoxin, alcoholic beverages, 2,3,7,8-tetracholordibenzo-p-dioxin. Agents with a moderate level of evidence include acetaldehyde, polycyclic aromatic hydrocarbons, some nitrosamines, and yerba mate. Agents with a low level of evidence include bracken fern, fumonsin B(1), ochratoxin, and others. This review presents a summary of the evidence for the carcinogenicity of these and other agents and the ranks provided by two important assessment programs.

oncology
Investigation of the Tendency of Carbon Fibers to Disintegrate into Respirable Fiber-Shaped Fragments

Asmus Meyer-Plath,Dominic Kehren,Anna Große,Romy Naumann,Marcel Hofmann,Tanja Schneck,Antje Ota,Frank Hermanutz,Nico Dziurowitz,Carmen Thim,Sabine Plitzko,Daphne Bäger

DOI: https://doi.org/10.3390/fib11060050

2023-06-07

Fibers

Abstract:Recent reports of the release of large numbers of respirable and critically long fiber-shaped fragments from mesophase pitch-based carbon fiber polymer composites during machining and tensile testing have raised inhalation toxicological concerns. As carbon fibers and their fragments are to be considered as inherently biodurable, the fiber pathogenicity paradigm motivated the development of a laboratory test method to assess the propensity of different types of carbon fibers to form such fragments. It uses spallation testing of carbon fibers by impact grinding in an oscillating ball mill. The resulting fragments were dispersed on track-etched membrane filters and morphologically analyzed by scanning electron microscopy. The method was applied to nine different carbon fiber types synthesized from polyacrylonitrile, mesophase or isotropic pitch, covering a broad range of material properties. Significant differences in the morphology of formed fragments were observed between the materials studied. These were statistically analyzed to relate disintegration characteristics to material properties and to rank the carbon fiber types according to their propensity to form respirable fiber fragments. This tendency was found to be lower for polyacrylonitrile-based and isotropic pitch-based carbon fibers than for mesophase pitch-based carbon fibers, but still significant. Although there are currently only few reports in the literature of increased respirable fiber dust concentrations during the machining of polyacrylonitrile-based carbon fiber composites, we conclude that such materials have the potential to form critical fiber morphologies of WHO dimensions. For safe-and-sustainable carbon fiber-reinforced composites, a better understanding of the material properties that control the carbon fiber fragmentation is imperative.
[A Meta-Analysis of Cohort Studies on Cancer Mortality among Workers Exposure to Chrysotile Fiber Alone].

Lu Li,Tong-da Sun,Xing Zhang,Xiu-yang Li,Xue-jin Fan,Morinaga Kenji

DOI: https://doi.org/10.3760/j:issn:0253-9624.2004.01.012

2004-01-01

Abstract:OBJECTIVE:To determine there was excessive risk of malignant tumors or not among workers exposure to chrysotile fiber alone by applying a meta-analysis technique.METHODS:All data meeting the criteria of cohort studies on cancer mortality among workers exposed only to chrysotile would incorporate into the meta-analysis. The pooled standardized mortality ratios (SMR) and their corresponding 95% confidence intervals (95% CI) for main cancer sites were calculated using two approaches of unweighted ratio and random effects model. The heterogeneity and its sources of the results were examined with a Q-statistic and Z-score test.RESULTS:26 chrysotile-exposed alone cohorts were summarized. The significantly elevated meta-SMRs for all deaths (1.28), all cancers (1.26), cancers of respiratory organs (2.24), cancer of lung (2.29) and cancer of stomach (1.27) were observed. The significantly elevated meta-SMRs for lung cancer within occupational strata were observed among textile workers (3.64), asbestos products manufacturers (3.07), miners and millers (2.24), cement products workers (1.22), and for stomach cancer among asbestos products manufacturers (1.48). Meta-SMRs for cancers at other sites were not significant.CONCLUSION:There were excessive risks of lung cancer and mesothelioma among workers exposure to chrysotile fiber alone, and likely no convincing indication of an etiological association between chrysotile exposure and cancers at other sites.
Review of refractory ceramic fiber (RCF) toxicity, epidemiology and occupational exposure

L. Daniel Maxim,Mark J. Utell

DOI: https://doi.org/10.1080/08958378.2018.1448019

2018-01-28

Inhalation Toxicology

Abstract:This literature review on refractory ceramic fibers (RCF) summarizes relevant information on manufacturing, processing, applications, occupational exposure, toxicology and epidemiology studies. Rodent toxicology studies conducted in the 1980s showed that RCF caused fibrosis, lung cancer and mesothelioma. Interpretation of these studies was difficult for various reasons (e.g. overload in chronic inhalation bioassays), but spurred the development of a comprehensive product stewardship program under EPA and later OSHA oversight. Epidemiology studies (both morbidity and mortality) were undertaken to learn more about possible health effects resulting from occupational exposure. No chronic animal bioassay studies on RCF have been conducted since the 1980s. The results of the ongoing epidemiology studies confirm that occupational exposure to RCF is associated with the development of pleural plaques and minor decrements in lung function, but no interstitial fibrosis or incremental lung cancer. Evidence supporting a finding that urinary tumors are associated with RCF exposure remains, but is weaker. One reported, but unconfirmed, mesothelioma was found in an individual with prior occupational asbestos exposure. An elevated SMR for leukemia was found, but was absent in the highly exposed group and has not been observed in studies of other mineral fibers. The industry will continue the product stewardship program including the mortality study.

toxicology
An alternative in vitro model considering cell-cell interactions in fiber-induced pulmonary fibrosis

Jana Pantzke,Svenja Offer,Elias J Zimmermann,Evelyn Kuhn,Thorsten Streibel,Sebastian Oeder,Sebastiano Di Bucchianico,Ralf Zimmermann

DOI: https://doi.org/10.1080/15376516.2022.2156008

Abstract:Particularly since the wide-ranging health effects of asbestos exposure became known, great emphasis has been placed on detailed toxicity testing of known but also newly developed fiber materials. Exposure to respirable pollutants like fibers can lead to tissue injury causing lung diseases such as pulmonary fibrosis or cancer. In order to detect the toxic potential of such aerosols at an early stage, the development of suitable test systems is essential. In this study, we illustrate the development of an advanced in vitro cell model closely resembling the physiological structure of the alveoli, and we highlight its advantages over simpler models to predict pro-fibrotic changes. For this reason, we analyzed the cytotoxic effects of fiber-like multi-walled carbon nanotubes after 24 and 48 h exposure, and we investigated inflammatory, genotoxic and pro-fibrotic changes occurring in the developed triple culture consisting of lung epithelial cells, macrophages and fibroblasts compared to a co-culture of epithelial cells and fibroblasts or a mono culture of epithelial cells. In summary, the triple culture system is more precisely able to detect a pro-fibrotic phenotype including epithelial-mesenchymal transition as well as secondary genotoxicity, even if exhibiting lower cytotoxicity in contrast to the less advanced systems. These effects might be traced back to the complex interplay between the different cell types, all of which play an important role in the inflammatory response, which precedes wound healing, or even fibrosis or cancer development.
The asbestos-carbon nanotube analogy: An update

Agnes B. Kane,Robert H. Hurt,Huajian Gao

DOI: https://doi.org/10.1016/j.taap.2018.06.027

IF: 4.46

2018-01-01

Toxicology and Applied Pharmacology

Abstract:Nanotechnology is an emerging industry based on commercialization of materials with one or more dimensions of 100 nm or less. Engineered nanomaterials are currently incorporated into thin films, porous materials, liquid suspensions, or filler/matrix nanocomposites with future applications predicted in energy and catalysis, microelectronics, environmental sensing and remediation, and nanomedicine. Carbon nanotubes are one-dimensional fibrous nanomaterials that physically resemble asbestos fibers. Toxicologic studies in rodents demonstrated that some types of carbon nanotubes can induce mesothelioma, and the World Health Organization evaluated long, rigid multiwall carbon nanotubes as possibly carcinogenic for humans in 2014. This review summarizes key physicochemical similarities and differences between asbestos fibers and carbon nanotubes. The “fiber pathogenicity paradigm” has been extended to include carbon nanotubes as well as other high-aspect-ratio fibrous nanomaterials including metallic nanowires. This paradigm identifies width, length, and biopersistence of high-aspect-ratio fibrous nanomaterials as critical determinants of lung disease, including mesothelioma, following inhalation. Based on recent theoretical modeling studies, a fourth factor, mechanical bending stiffness, will be considered as predictive of potential carcinogenicity. Novel three-dimensional lung tissue platforms provide an opportunity for in vitro screening of a wide range of high aspect ratio fibrous nanomaterials for potential lung toxicity prior to commercialization.
Processing of carbon-reinforced construction materials releases PM2.5 inducing inflammation and (secondary) genotoxicity in human lung epithelial cells and fibroblasts

Jana Pantzke,Arne Koch,Elias J Zimmermann,Narges Rastak,Svenja Offer,Christoph Bisig,Stefanie Bauer,Sebastian Oeder,Jürgen Orasche,Petra Fiala,Michael Stintz,Christopher P Rüger,Thorsten Streibel,Sebastiano Di Bucchianico,Ralf Zimmermann

DOI: https://doi.org/10.1016/j.etap.2023.104079

Abstract:Building demolition following domestic fires or abrasive processing after thermal recycling can release particles harmful for the environment and human health. To mimic such situations, particles release during dry-cutting of construction materials was investigated. A reinforcement material consisting of carbon rods (CR), carbon concrete composite (C³) and thermally treated C³ (ttC³) were physicochemically and toxicologically analyzed in monocultured lung epithelial cells, and co-cultured lung epithelial cells and fibroblasts at the air-liquid interface. C³ particles reduced their diameter to WHO fibre dimensions during thermal treatment. Caused by physical properties or by polycyclic aromatic hydrocarbons and bisphenol A found in the materials, especially the released particles of CR and ttC³ induced an acute inflammatory response and (secondary) DNA damage. Transcriptome analysis indicated that CR and ttC³ particles carried out their toxicity via different mechanisms. While ttC³ affected pro-fibrotic pathways, CR was mostly involved in DNA damage response and in pro-oncogenic signaling.
Environmentally prevalent polycyclic aromatic hydrocarbons can elicit co-carcinogenic properties in an in vitro murine lung epithelial cell model

Alison K. Bauer,Kalpana Velmurugan,Sabine Plöttner,Katelyn J. Siegrist,Deedee Romo,Peter Welge,Thomas Brüning,Ka-Na Xiong,Heiko U. Käfferlein

DOI: https://doi.org/10.1007/s00204-017-2124-5

2017-11-23

Archives of Toxicology

Abstract:Low molecular weight (LMW) polycyclic aromatic hydrocarbons (PAH) are the most abundant PAHs environmentally, occupationally, and are in cigarette smoke; however, little is known about their carcinogenic potential. We hypothesized that LMW PAHs act as co-carcinogens in the presence of a known carcinogen (benzo[a]pyrene (B[a]P)) in a mouse non-tumorigenic type II cell line (C10 cells). Gap junctions are commonly suppressed and inflammation induced during tumor promotion, while DNA-adduct formation is observed during the initiation stage of cancer. We used these endpoints together as markers of carcinogenicity in these lung adenocarcinoma progenitor cells. LMW PAHs (1-methylanthracene and fluoranthene, 1–10 µM total in a 1:1 ratio) were used based on previous studies as well as B[a]P (0–3 µM) as the classic carcinogen; non-cytotoxic doses were used. B[a]P-induced inhibition of gap junctional intercellular communication (GJIC) was observed at low doses and further reduced in the presence of the LMW PAH mixture (P < 0.05), supporting a role for GJIC suppression in cancer development. Benzo[a]pyrene diol-epoxide (BPDE)-DNA adduct levels were significantly induced in B[a]P-treated C10 cells and additionally increased with the LMW PAH mixture (P < 0.05). Significant increases in cyclooxygenase (Cox-2) were observed in response to the B[a]P/LMW PAH mixture combinations. DNA adduct formation coincided with the inhibition of GJIC and increase in Cox-2 mRNA expression. Significant cytochrome p4501b1 increases and connexin 43 decreases in gene expression were also observed. These studies suggest that LMW PAHs in combination with B[a]P can elicit increased carcinogenic potential. Future studies will further address the mechanisms of co-carcinogenesis driving these responses.

toxicology
[Chemical and physical characteristics and toxicology of man-made mineral fibers]

V Foà,S Basilico

Abstract:The evidence for the adverse health effects following exposure to asbestos (i.e. fibrogenic and carcinogenic effect) has prompted widespread removal of asbestos-containing materials and led to banning of asbestos internationally (in Italy, DPR 257/1992), resulting in the increased use of substitutes composed of both naturally occurring and synthetic materials, including man made mineral fibres (MMMFs) and man made organic fibres (MMOF). MMMFs represent a family of synthetic, inorganic vitreous substances derived primarily from glass, rock, slag, or clay. MMMFs are further divided into two categories: 1) man made vitreous fibres (MMVFs), further divided as follows: a) fibrous glass, including mainly continuous filament, special purpose fibres; and microfibres. The materials are typically composed of oxides of silicon, calcium, sodium, potassium, aluminum, and boron. b) Mineral wool, including glass wool, rock wool (derived from magma rock) and slag wool (made from molten slag produced in metallurgical processes such as the production of iron, steel, or copper). The main components of rock wool and slag wool are oxides of silicon, calcium, magnesium, aluminum, and iron. 2) Refractory/ceramic fibres, amorphous or partially crystalline materials made from kaolin clay or oxides of aluminum, silicon or other metal oxides (i.e. oxides of zirconium and yttrium). Less commonly, refractory fibres are also made from non-oxide refractory materials such as silicon carbide, silicon nitride, or boron nitride. Industrial production of MMVFs began in the second half of the 19th century, while ceramic fibres production began more recently, in the early 1970s. Major uses of MMMFs include thermal, acoustic and aerospace insulation, fire proofing, reinforcing material in plastics, cement and textile, optic fibres, air and liquid filtration, friction products, refractory coatings. Serious questions have been raised about health implications of MMMFs. Suspicion about the possible occurrence of adverse effects following exposure to MMMFs arises mainly from some similarities of MMMFs with asbestos (fibrous aspects, inhalability, chemical composition, free radical formation). The fibre characteristics that have been identified as crucial in influencing the pathogenesis of fibre-related adverse respiratory effects can be mainly divided into two groups: fibre dimension, and chemical composition and structure. Fibre dimension plays a determining role in conditioning penetration in the lung. In a broad sense, the term "respirable" means "capable of being carried by breath into the respiratory system". For regulatory purposes, "respirable fibres" (i.e. RFP) are defined in most countries following WHO criteria: length > 5 microns, diameter < 3 microns, length/diameter > 3. MMMFs are generally produced as fibres of diameter higher than asbestos, and too large in diameter to be respirable. Moreover, due to the production process, they are structurally amorphous. Since MMMFs have no crystalline domains, they also have no clearly defined structural faults and they fracture transversely, and randomly. Fragments that are too large to be taken up by macrophages can be resolved in the lung by a leaching--or dissolution--process which leads to a progressive reduction of particle length. In contrast, when abraded, asbestos tends to split longitudinally into new, fine, straight fibres: these fibrils are of much smaller diameter, more respirable, and consequently more hazardous than parent fibres. Fibre chemical composition plays a determining role in conditioning the higher or lower biological activity, durability, biopersistence, and biodegradability. The term "biological activity" means reactivity or ability to interact (possibly due to formation of active oxygen species, identified as a crucial step in the mechanism of action) with biological structures and tissues. Fibre "durability" is strictly related to its solubility. It can be defined as the ability to resist
Investigation of Chronic Toxic and Carcinogenic Effects of Gasoline Engine Exhausts Deriving from Fuel without and with Ferrocene Additive

L Peters,H Ernst,W Koch,W Bartsch,B Bellmann,O Creutzenberg,H G Hoymann,C Dasenbrock,U Heinrich

DOI: https://doi.org/10.1080/08958378.2000.11463200

Abstract:Chronic toxic and carcinogenic effects of gasoline engine exhaust inhalation were investigated in rats. The exhaust from the combustion of commercial fuel containing 30 ppm ferrocene additive was compared to exhaust from the same fuel without ferrocene. This study was part of a procedure to get a special authorization for the use of ferrocene as gasoline additive according to the German Gasoline Lead Act. To generate the exhausts, pairs of engines of the same type and age were operated on computer-controlled test benches in a combined urban-freeway driving cycle. The engines were equipped with three-way catalysts and lambda sensors. Rats inhaled the exhausts after dilution at ratios of about 1.20 and 1:40 for 18 h/day, 5 days/wk for 12 mo (chronic toxicity study) or for 24 mo followed by 6 mo of clean air (carcinogenicity study). The limiting factor for the exhaust concentration was the relative humidity of the exposure atmosphere. At defined intervals, body weight and food consumption, parameters of clinical chemistry, hematology, bronchoalveolar lavage (BAL), and mechanical lung function were measured, as well as lung clearance and particle retention in the lungs. In the high-dose groups and the controls the complete organ/tissue spectrum was investigated histopathologically, and in the low-dose groups the respiratory tract. Only slight exposure-related effects could be detected, like a loss in the background iron content of the cell pellet of the bronchoalveolar lavage fluid and cytoplasmic inclusions and goblet-cell hyperplasias in the nasal cavity. Between the clean-air controls and the exhaust-exposed groups, no exposure-related differences occurred in body weight development, mortality incidences, or any of the clinical investigations. Ninety-two to 94% of the animals developed age-related tumors, predominantly in the mammary glands, uterus, adrenals, thyroid, and pituitary. In the respiratory tract a total of five tumors was found: one in the controls and four in the low-dose groups. No physical, chemical, or toxicological differences between the exhausts from fuel without or with ferrocene were demonstrated.
Methodological steps forward in toxicological in vitro screening of mineral wools in primary rat alveolar macrophages and normal rat mesothelial NRM2 cells

Christina Ziemann,Florian Schulz,Christoph Koch,Mette Solvang,Annette Bitsch

DOI: https://doi.org/10.1007/s00204-024-03855-7

2024-09-13

Archives of Toxicology

Abstract:Man-made vitreous fibers (MMVF) comprise diverse materials for thermal and acoustic insulation, including stone wool. Depending on dimension, durability, and dose, MMVF might induce adverse health effects. Therefore, early predictive in vitro (geno)toxicity screening of new MMVF is highly desired to ensure safety for exposed workers and consumers. Here, we investigated, as a starting point, critical in vitro screening determinants and pitfalls using primary rat alveolar macrophages (AM) and normal rat mesothelial cells (NRM2). A stone wool fiber (RIF56008) served as an exemplary MMVF (fibrous vs. ground to estimate impact of fiber shape) and long amosite (asbestos) as insoluble fiber reference. Materials were comprehensively characterized, and in vivo-relevant in vitro concentrations defined, based on different approaches (low to supposed overload: 0.5, 5 and 50 μg/cm 2 ). After 4–48 h of incubation, certain readouts were analyzed and material uptake was investigated by light and fluorescence-coupled darkfield microscopy. DNA-strand break induction was not morphology-dependent and nearly absent in both cell types. However, NRM2 demonstrated material-, morphology- and concentration-dependent membrane damage, CINC-1 release, reduction in cell count, and induction of binucleated cells (asbestos > RIF56008 > RIF56008 ground). In contrast to NRM2, asbestos was nearly inactive in AM, with CINC-1 release solely induced by RIF56008. In conclusion, to define an MMVF-adapted, predictive in vitro (geno)toxicity screening tool, references, endpoints, and concentrations should be carefully chosen, based on in vivo relevance, and sensitivity and specificity of the chosen cell model. Next, further endpoints should be evaluated, ideally with validation by in vivo data regarding their predictivity.

toxicology
Resolving asbestos and ultrafine particulate definitions with carcinogenicity

Sean M. Fitzgerald

DOI: https://doi.org/10.1016/j.lungcan.2024.107478

IF: 6.081

2024-01-28

Lung Cancer

Abstract:As asbestos fibers and other fine particles have been studied extensively to correlate physical and chemical properties with their potential for negative human health impact on inhalation, there remains no concise definitions for the individual particle types nor collective considerations of combined variabilities. Extensive studies relating negative health to asbestos morphology, chemistry, surface effects, and biodurability form general qualitative bins of what is more likely causative or less, but do not provide enough information to quantitatively dismiss particles with parameters outside any given range. Further, natural mineral species and accessory mineralization makes standardization of universally applicable reference materials nearly unobtainable. With modern advent of engineered nanoparticles, we are adding even more unknowns to the universe of the microscopic size fraction and its potential for human disease, and our paradigm is challenged.

oncology,respiratory system
A comprehensive evaluation of the toxicology of cigarette ingredients: carbohydrates and natural products

Christopher R E Coggins,Karl A Wagner,Michael S Werley,Michael J Oldham

DOI: https://doi.org/10.3109/08958378.2011.545085

Abstract:Context: Eleven carbohydrates and natural product ingredients were added individually to experimental cigarettes. Objective: A battery of tests was used to compare toxicity of mainstream smoke from these experimental cigarettes to matched control cigarettes without test ingredients. Materials and methods: Smoke fractions from each cigarette type were evaluated using analytical chemistry; in vitro cytotoxicity (neutral red uptake) and in vitro bacterial (Salmonella) mutagenicity (five strains) testing. For 10 ingredients (β-cyclodextrin, cleargum, D-sorbitol, high fructose corn syrup, honey, invert sugar, maltodextrin, molasses, raisin juice concentrate, and sucrose), 90-day nose-only smoke inhalation studies using rats were also performed. Results: In general, addition of each ingredient in experimental cigarettes resulted in minimal changes in smoke chemistry; the exceptions were D-sorbitol and sucrose, where reductions in amount of 60% to 80% of control values for some smoke constituents were noted. Additionally, each ingredient resulted in small increases in smoke formaldehyde concentrations. Except for a reduction in cytotoxicity by inclusion of maltodextrin and an increase by inclusion of plum juice concentrate, the cytotoxicity and mutagenicity results were unaffected by addition of the other ingredients in experimental cigarettes. There were also very few statistically significant differences within any of the 10 inhalation studies, and when present, the differences were largely sporadic and inconsistent between sexes. Conclusion: The carbohydrates and natural products tested here as ingredients in experimental cigarettes as a class increased formaldehyde, but resulted in minimal toxicological responses, even at high inclusion levels compared with the levels used in commercial cigarette products.
Binucleated cell formation and oncogene expression after particulate matter exposure is preceded by microtubule disruption, dysregulated cell cycle, prolonged mitosis, and septin binding

Rok Podlipec,Aleksandar Sebastijanovič,Hilary Cassidy,Lianyong Han,Pernille Danielsen,Petra Čotar,Hana Kokot,Benjamin Koroševič Koser,Ana Vencelj,Luka Pirker,Polona Umek,Gregor Hlawacek,Rene Heller,David Matallanas,Primož Pelicon,Tobias Stoeger,Iztok Urbančič,Ulla Vogel,Tilen Koklič,Janez Štrancar

DOI: https://doi.org/10.1101/2024.01.07.574515

2024-01-08

Abstract:Several biopersistent high aspect ratio nanomaterials show pronounced pathogenic effects, from chronic lung inflammation and fibrosis to cancer. For example, asbestos fibers are classified as carcinogens, whereas the carcinogenicity of highly inflammatory multi-wall carbon nanotubes (MWCNTs), and TiO nanomaterials is still being evaluated. The exact early mechanisms of their pathogenicity towards inflammation and cancer remains uncertain, but it is likely not due to genotoxic or mutagenic activity. A proposed early mode of action that might lead to the formation of cancerous cells for asbestos fibers is the formation of binucleated and multinucleated cells, resulting in genetic instability. Here, we show that two high aspect ratio nanomaterials, MWCNTs and TiO nanotubes, which both induce chronic lung inflammation, induce very different cancer-related changes . TiO nanotubes – but not low aspect-ratio nanocubes of the same crystalline structure – disrupt microtubule organization and prolong mitosis, as well as deform nuclear shape, induce the formation of binucleated cells, and downregulate the tumour suppressor protein p53, whereas only the MWCNTs activate the stimulator of the interferon genes (STING) pathway, a hallmark of lung cancer. The observed differences in cellular responses to different high aspect ratio materials imply the need for assessing each nanomaterial individually with a broad range of tests rather than relying solely on a single marker or pathway, or even morphological or bulk chemical properties to infer possible carcinogenic properties.

Cancer Biology
Systems toxicology of complex wood combustion aerosol reveals gaseous carbonyl compounds as critical constituents

Marco Dilger,Olivier Armant,Larissa Ramme,Sonja Mülhopt,Sean C Sapcariu,Christoph Schlager,Elena Dilger,Ahmed Reda,Jürgen Orasche,Jürgen Schnelle-Kreis,Thomas M Conlon,Ali Önder Yildirim,Andrea Hartwig,Ralf Zimmermann,Karsten Hiller,Silvia Diabaté,Hanns-Rudolf Paur,Carsten Weiss

DOI: https://doi.org/10.1016/j.envint.2023.108169

Abstract:Epidemiological studies identified air pollution as one of the prime causes for human morbidity and mortality, due to harmful effects mainly on the cardiovascular and respiratory systems. Damage to the lung leads to several severe diseases such as fibrosis, chronic obstructive pulmonary disease and cancer. Noxious environmental aerosols are comprised of a gas and particulate phase representing highly complex chemical mixtures composed of myriads of compounds. Although some critical pollutants, foremost particulate matter (PM), could be linked to adverse health effects, a comprehensive understanding of relevant biological mechanisms and detrimental aerosol constituents is still lacking. Here, we employed a systems toxicology approach focusing on wood combustion, an important source for air pollution, and demonstrate a key role of the gas phase, specifically carbonyls, in driving adverse effects. Transcriptional profiling and biochemical analysis of human lung cells exposed at the air-liquid-interface determined DNA damage and stress response, as well as perturbation of cellular metabolism, as major key events. Connectivity mapping revealed a high similarity of gene expression signatures induced by wood smoke and agents prompting DNA-protein crosslinks (DPCs). Indeed, various gaseous aldehydes were detected in wood smoke, which promote DPCs, initiate similar genomic responses and are responsible for DNA damage provoked by wood smoke. Hence, systems toxicology enables the discovery of critical constituents of complex mixtures i.e. aerosols and highlights the role of carbonyls on top of particulate matter as an important health hazard.
Cell circuits underlying nanomaterial specific respiratory toxicology

Carola Voss,Lianyong Han,Meshal Ansari,Maximilian Strunz,Verena Haefner,Carol Ballester-Lopez,Ilias Angelidis,Christoph H. Mayr,Trine Berthing,Thomas Conlon,Qiongliang Liu,Hongyu Ren,Qiaoxia Zhou,Otmar Schmid,Ali Önder Yildirim,Markus Rehberg,Ulla Vogel,Janine Gote-Schniering,Fabian J. Theis,Herbert B. Schiller,Tobias Stoeger

DOI: https://doi.org/10.1101/2024.02.10.579746

2024-02-12

Abstract:Nanomaterials emerged as boundless resource of innovation, but their shape and biopersistence related to respiratory toxicology raise longstanding concerns. The development of predictive safety tests for inhaled nanomaterials, however, is hampered by limited understanding of cell type-specific responses. To advance this knowledge, we used single-cell RNA-sequencing to longitudinally analyze cellular perturbations in mice, caused by three carbonaceous nanomaterials of different shape and toxicity upon pulmonary delivery. Focusing on nanomaterial-specific dynamics of lung inflammation, we found persistent depletion of alveolar macrophages by fiber-shaped nanotubes. While only little involvement was observed for alveolar macrophages during the initiation phase, they emerged, together with infiltrating monocyte-derived macrophages, as decisive factors in shifting inflammation towards resolution for spherical nanomaterials, or chronic inflammation for fibers. Fibroblasts, central for fibrosis, sensed macrophage and epithelial signals and emerged as orchestrators of nanomaterial-induced inflammation. Thus, the mode of actions identified in this study will significantly inspire the precision of future testing.

Pharmacology and Toxicology
Dendritic Potential in Direct Cortical Responses and Seizure Activity

I. Jibiki,Kanji Matsumoto,T. Ohtani,K. Hosokawa,N. Yamaguchi

DOI: https://doi.org/10.1111/j.1440-1819.1978.tb02794.x

1978-09-01

Abstract:For the purpose of studying the electrophysiological activity in the apical dendrites during a seizure, changes of dendritic potentials (DPs) in direct cortical responses were investigated during and after electrically induced seizures. As results, during a seizure, either the DPs were not elicited at all or the DPs depressed in amplitude were elicited. Furthermore, the suppression of the DPs was particulary marked when positive seizure discharges were seen in the cortical surface. In conclusion, from reference to the past studies with intracellular recordings, the suppression of the DPs was considered to indicate that a sustained depolarization took place in the apical dendrites during a seizure and greater depression of the DPs during surface‐positive seizure discharges was seemed to suggest that EPSPs arise in the apical dendrites simultaneously with the surface‐positive seizure discharges.
Human Health Hazards Associated with Asbestos in Building Materials

Alessandro F. Gualtieri,Magdalena Lassinantti Gualtieri,Valentina Scognamiglio,Dario Di Giuseppe

DOI: https://doi.org/10.1007/978-3-030-76073-1_16

2021-08-08

Abstract:AsbestosAsbestos is a fibrous natural material that possesses outstanding technological properties exploited since the time of its discovery for the manufacture of various building materials. Unfortunately, as known since the mid-1950s, both humans and animals exposed to asbestos fibres may develop a number of lethal respiratory diseases. Consequently, international medical and health organizations have classified asbestos as a human carcinogen and many countries worldwide have banned its use. Besides a short historical chronicle, this chapter provides a classification of asbestos minerals, applications in building materials, as well as its toxicityToxicityand pathogenicityPathogenicity mechanisms. The global asbestos issue and its use as a building material today will be the core of the chapter. In addition, a section is dedicated to the description of the reclaim, disposalDisposaland recyclingRecyclingof asbestosAsbestos containing materials and a description of the substitutes of asbestos used today in building materials.

[Carcinogenic working materials exemplified by fibers].

Synthetic silica fibers of different length, diameter and shape: synthesis and interaction with rat (NR8383) and human (THP-1) macrophages in vitro, including chemotaxis and gene expression profile

Occupational exposure to carcinogens: Benzene, pesticides and fibers

Carcinogenic Food Contaminants

Investigation of the Tendency of Carbon Fibers to Disintegrate into Respirable Fiber-Shaped Fragments

[A Meta-Analysis of Cohort Studies on Cancer Mortality among Workers Exposure to Chrysotile Fiber Alone].

Review of refractory ceramic fiber (RCF) toxicity, epidemiology and occupational exposure

An alternative in vitro model considering cell-cell interactions in fiber-induced pulmonary fibrosis

The asbestos-carbon nanotube analogy: An update

Processing of carbon-reinforced construction materials releases PM2.5 inducing inflammation and (secondary) genotoxicity in human lung epithelial cells and fibroblasts

Environmentally prevalent polycyclic aromatic hydrocarbons can elicit co-carcinogenic properties in an in vitro murine lung epithelial cell model

[Chemical and physical characteristics and toxicology of man-made mineral fibers]

Investigation of Chronic Toxic and Carcinogenic Effects of Gasoline Engine Exhausts Deriving from Fuel without and with Ferrocene Additive

Methodological steps forward in toxicological in vitro screening of mineral wools in primary rat alveolar macrophages and normal rat mesothelial NRM2 cells

Resolving asbestos and ultrafine particulate definitions with carcinogenicity

A comprehensive evaluation of the toxicology of cigarette ingredients: carbohydrates and natural products

Binucleated cell formation and oncogene expression after particulate matter exposure is preceded by microtubule disruption, dysregulated cell cycle, prolonged mitosis, and septin binding

Systems toxicology of complex wood combustion aerosol reveals gaseous carbonyl compounds as critical constituents

Cell circuits underlying nanomaterial specific respiratory toxicology

Dendritic Potential in Direct Cortical Responses and Seizure Activity

Human Health Hazards Associated with Asbestos in Building Materials