Eicosapentaenoic acid decreases postprandial beta-hydroxybutyrate and free fatty acid responses in healthy young and elderly.

M. Plourde,J. Tremblay-Mercier,M. Fortier,F. Pifferi,S. Cunnane

DOI: https://doi.org/10.1016/j.nut.2008.09.006

2009-03-01

Abstract:

What problem does this paper attempt to address?

Thermosensitive Polymeric Micelles Based On The Triblock Copolymer Poly(D,L-Lactide)-B-Poly(N-Isopropyl Acrylamide)-B-Poly(D,L-Lactide) For Controllable Drug Delivery

Peng Li,Zhenfang Zhang,Zhiqiang Su,Gang Wei

DOI: https://doi.org/10.1002/app.45304

IF: 3

2017-01-01

Journal of Applied Polymer Science

Abstract:A thermosensitive amphiphilic triblock copolymer, poly((D),(L)-lactide) (PLA)-b-poly(N-isopropyl acrylamide) (PNIPAAM)b- PLA, was synthesized by the ring-opening polymerization of (D,L)-lactide; the reaction was initiated from a dihydroxy-terminated poly(N-isopropyl acrylamide) homopolymer (HO-PNIPAAM-OH) created by radical polymerization. The molecular structure, thermosensitive characteristics, and micellization behavior of the obtained triblock copolymer were characterized with Fourier transform infrared spectroscopy, H-1-NMR, gel permeation chromatography, dynamic light scattering, and transmission electron microscopy. The obtained results indicate that the composition of PLA-b-PNIPAAM-b-PLA was in good agreement with what was preconceived. This copolymer could self-assemble into spherical core-shell micelles (ca. 75-80 nm) in aqueous solution and exhibited a phasetransition temperature around 26 degrees C. Furthermore, the drug-delivery properties of the PLA-b-PNIPAAM-b-PLA micelles were investigated. The drug-release test indicated that the synthesized PLA-b-PNIPAAM-b-PLA micelles could be used as nanocarriers of the anticancer drug adriamycin (ADR) to effectively control the release of the drug. The drug-delivery properties of PLA-b-PNIPAAMb- PLA showed obvious thermosensitive characteristics, and the release time of ADR could be extended to 50 h. This represents a significant improvement from previous PNIPAAM-based drug-delivery systems. (C) 2017 Wiley Periodicals, Inc.
Novel Amphiphilic, Biodegradable, Biocompatible, Thermo-Responsive ABA Triblock Copolymers Based on PCL and PEG Analogues via a Combination of ROP and RAFT: Synthesis, Characterization, and Sustained Drug Release from Self-Assembled Micelles

Wenyan Ning,Pei Shang,Jie Wu,Xiaoyu Shi,Shouxin Liu

DOI: https://doi.org/10.3390/polym10020214

IF: 5

2018-02-22

Polymers

Abstract:Well-defined novel, linear, biodegradable, amphiphilic thermo-responsive ABA-type triblock copolymers, poly[2-(2-methoxyethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methacrylate]-b-poly(ε-caprolactone)-b-poly[2-(2-methoxyethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methacrylate] [P(MEO2MA-co-OEGMA)-b-PCL-b-P(MEO2MA-co-OEGMA)] (tBPs), were synthesized via a combination of ring-opening polymerization (ROP) of ε-caprolactone (εCL) and reversible addition-fragmentation chain transfer polymerization (RAFT) of MEO2MA and OEGMA comonomers. The chemical structures and compositions of these copolymers were characterized using Fourier transform infrared spectroscopy (FT-IR) and proton nuclear magnetic resonance (1H NMR). The molecular weights of the copolymers were obtained using gel permeation chromatography (GPC) measurements. Thermo-responsive micelles were obtained by self-assembly of copolymers in aqueous medium. The temperature sensitivity and micelllization behavior of amphiphilic triblock copolymers solutions were studied by transmittance, fluorescence probe, surface tension, dynamic light scattering (DLS) and transmission electron microscopy (TEM). A hydrophobic drug, anethole, was encapsulated in micelles by using the dialysis method. The average particle sizes of drug-loaded micelles were determined by dynamic light scattering measurement. In vitro, the sustained release of the anethole was performed in pH 7.4 phosphate-buffered saline (PBS) at different temperatures. Results showed that the triblock copolymer’s micelles were quite effective in the encapsulation and controlled release of anethole. The vial inversion test demonstrated that the triblock copolymers could trigger the sol-gel transition which also depended on the temperature, and its sol-gel transition temperature gradually decreased with increasing concentration. The hydrogel system could also be used as a carrier of hydrophobic drugs in medicine.

polymer science
Preparation and Characterization of Thermo-Sensitive Mixed Micelles and in Vitro Drug Release

Tan Songwei,Han Chao,Wang Hongjun,Liu Dingrong,Tu Kehua,Jiang Hongliang,Zhang Meihua,Wang Liqun

DOI: https://doi.org/10.3724/sp.j.1105.2011.10301

2011-01-01

Abstract:Amphiphilic poly(N-isopropylacrylamide) with cholesterol as hydrophobic end group(Chol-PNIPAM) was synthesized through atom transfer radical polymerization(ATRP).The resulted Chol-PNIPAM was characterized with FTIR,1H-NMR and GPC.Simply mixing Chol-PNIPAM with methoxy poly(ethylene glycol) monostearate(mPEG-SA),a mixed micellar system was prepared.The lower critical micellization concentration(CMC) of the mixed micelles was 6.23×10-3 g/L for the Chol/SA molar ratio of 0.2,and 1.00×10-2 g/L for the Chol/SA molar ratio of 0.5,respectively,which were significantly lower than that of the virgin mPEG-SA or Chol-PNIPAM micelles.Dynamic light scattering(DLS) study showed the composited micelle core was formed by cholesterol of Chol-PNIPAM and the fatty chain of mPEG-SA.The result is similar to the phenomenon that the cell membrane was stabilized by embedding cholesterol into the bilayer phospholipid membrane.DLS study also showed that the thermo-sensitive phase transition temperature expressed in the size change of the mixed micelles was between 33℃ and 35℃.The particle size of Chol-PNIPAM/mPEG-SA micelles with the Chol/SA molar ratio of 0.2 was 13 nm.When temperature was above 35℃,the size increased to 65 nm.For Chol-PNIPAM/mPEG-SA with the Chol/SA molar ratio of 0.5,the particle size changed from 14 nm to 200 nm,and the change was revisable.In contrast,the mPEG-SA micelles did not exhibit any temperature responsiveness,and the Chol-PNIPAM micelle,though thermal responsive,was not stable and large aggregation formed because of the hydrophilic-hydrophobic transition of PNIPAM segment.The results show that the Chol-PNIPAM/mPEG-SA mixed micelles with the properties of higher stability and satisfactory thermo-responsiveness is worth to study further for the use as a drug delivery system.In vitro release study shows that the release behavior of IMC from the drug-loaded micelle was thermo-sensitive and the release rate increases with both the PNIPAM content and temperature.
Thermally Responsive Polymeric Micelles Self-Assembled By Amphiphilic Polyphosphazene With Poly(N-Isopropylacrylamide) And Ethyl Glycinate As Side Groups: Polymer Synthesis, Characterization, And In Vitro Drug Release Study

Jx Zhang,Ly Qiu,Y Jin,Kj Zhu

DOI: https://doi.org/10.1002/jbm.a.30604

2006-01-01

Journal of Biomedical Materials Research Part A

Abstract:Thermally responsive amphiphilic poly(N-isopropylacrylamide) (PNIPAm)-grafted-polyphosphazene (PNIPAm-g-PPP) was synthesized by stepwise cosubstitution of chlorine atoms on polymer backbones with amino-terminated NIPAm oligomers and ethyl glycinate (GIyEt). Polymer Structure was confirmed by FT-IR, H-1 NMR, elemental analysis, and GPC. The thermosensitivity of PNIPAm-g-PPP aqueous Solution was investigated by turbidity method. The lower critical Solution temperature (LCST) of PNIPAm-g-PPP was observed to be similar to 30 degrees C in water, while it was 24 degrees C in 0.1M PBS (pH 7.4). Micellization beliavior of PNIPAm-g-PPP in aqueous solution was characterized by fluorescence probe technique, TEM, and DLS. The critical micelle concentration (CMC), thus, determined was 0.0187 g/L. Both TEM and DLS measurement Suggested that the diameter of micelles was similar to 190 min at 20 degrees C. Diflunisal (DIF)-loaded micelles were prepared by dialysis method. In vitro release test at various temperatures was also performed to Study the effect of temperature on the drug release profiles. It was demonstrated that DIF release from PNIPAm-g-PPP micelles was slower at the temperature of 37 degrees C than that at 4 degrees C. (c) 2005 Wiley Periodicals, Inc.
Thermally responsive polymeric micelles self-assembled by amphiphilic polyphosphazene with poly(N-isopropylacrylamide) and ethyl glycinate as side groups: polymer synthesis, characterization, and in vitro drug release study.

Jian Xiang Zhang,Li Yan Qiu,Yi Jin,Kang Jie Zhu

2006-01-01

Abstract:Thermally responsive amphiphilic poly(N-isopropylacrylamide) (PNIPAm)-grafted-polyphosphazene (PNIPAm-g-PPP) was synthesized by stepwise cosubstitution of chlorine atoms on polymer backbones with amino-terminated NIPAm oligomers and ethyl glycinate (GlyEt). Polymer structure was confirmed by FT-IR, (1)H NMR, elemental analysis, and GPC. The thermosensitivity of PNIPAm-g-PPP aqueous solution was investigated by turbidity method. The lower critical solution temperature (LCST) of PNIPAm-g-PPP was observed to be approximately 30 degrees C in water, while it was 24 degrees C in 0.1M PBS (pH 7.4). Micellization behavior of PNIPAm-g-PPP in aqueous solution was characterized by fluorescence probe technique, TEM, and DLS. The critical micelle concentration (CMC), thus, determined was 0.0187 g/L. Both TEM and DLS measurement suggested that the diameter of micelles was approximately 190 nm at 20 degrees C. Diflunisal (DIF)-loaded micelles were prepared by dialysis method. In vitro release test at various temperatures was also performed to study the effect of temperature on the drug release profiles. It was demonstrated that DIF release from PNIPAm-g-PPP micelles was slower at the temperature of 37 degrees C than that at 4 degrees C.
Synthesis, Self‐Assembly and Drug Controlled Releasing Performance of Triple Responsive Ternary Copolymer Micelles

Shaohua Peng,Danyang Li,Yuanpeng Cai,Hui Liu

DOI: https://doi.org/10.1002/slct.202304829

2024-01-03

ChemistrySelect

Abstract:Release efficiencies at 45 °C are higher than those in 30 °C under the same other conditions, indicating high temperature is favorable to drug controlled releasing. The controllable releasing behaviors can be attributed to the distinctive core/shell vesicle structure after self‐assembly of the ternary copolymer. In order to avoid structural instability caused by the hydrolysis of spiropyran unit during responsive process, a new spiropyran monomer named as SPA was prepared by grafting carbamate functional groups to side chain of spiropyran frame. With SPA, 2‐(2‐(2‐methoxyethoxy) ethoxy) ethyl methacrylate (MEO3MA) and 2‐(diethylamino) ethyl methacrylate (DEAEMA) as the organic monomers, a triple responsive copolymer, P(SPA‐co‐MEO3MA‐co‐DEAEMA) abbreviated as PSOD, was obtained by one‐pot random copolymerization. The chemical structure, responsive behaviors and self‐assembly of the resulting copolymer were studied by a series of technical methods. With 5‐Fluoro‐2′‐deoxyuridin (FUDR) as the model anti‐cancer drug, the loading and controlled releasing behaviors of the copolymer micelles were systematically explored. Also, the cytotoxicity test and fluorescence imaging of PSOD copolymer were performed with human breast cancer cell line (MCF‐7) as the experimental subject. The results showed that the copolymer micelles had controllable drug releasing performance in complex combined stimuli conditions, and the releasing process could be well described by Korsmeyer‐Peppas model. The cytotoxicity of PSOD was proved to be relatively low, which laid a foundation for the subsequent in‐vivo drug releasing. Triple responsive performance of the copolymer micelles might provide a new inspiration for the future study of drug‐controlled releasing system.

chemistry, multidisciplinary
A hyperbranched amphiphilic acetal polymer for pH-sensitive drug delivery

Hongliang Cao,Chao Chen,Debiao Xie,Xin Chen,Ping Wang,Yibing Wang,Huajie Song,Wenxin Wang

DOI: https://doi.org/10.1039/c7py01739a

IF: 4.6

2018-01-01

Polymer Chemistry

Abstract:Nanoparticles are appealing drug delivery systems since they promise prolonged circulation time and predictable release behaviors. The current work reports a novel hyperbranched amphiphilic block copolymer synthesized using deactivation-enhanced atom transfer radical polymerization (DE-ATRP) for smart drug delivery. PEG2000-Br was applied as a macroinitiator to initiate acid-cleavable divinyl (ACD) monomers linked by acetal groups, formulating the hydrophilic (PEG) and hydrophobic (ACD) segments. The polymer appeared to self-assemble into micelles with diameters in the range of 70-100 nm, and was examined for the controlled release of doxorubicin (DOX). Results showed that DOX-loaded micelles (similar to 90 nm) could achieve drug loading as high as 8.2 wt%, with interesting pH-dependent release behaviors. Studies with flow cytometry (FCM) and confocal laser scanning microscopy (CLSM) showed that DOX-loaded micelles exhibited a high cellular uptake performance by HeLa cells, which indicated promising antitumor efficacy for such a drug delivery system. Additionally, such DOX-loaded micelles exhibited remarkable cytotoxicity against HeLa cells in a dose-and time-dependent manner due to the enhanced cell uptake behavior of micelles. These results indicated that the polymeric micelles might be used as a promising candidate for a pH-responsive drug delivery for cancer therapy.
Self-assembled micelles prepared from bio-based hydroxypropyl methyl cellulose and polylactide amphiphilic block copolymers for anti-tumor drug release

Aijing Lu,Eddy Petit,Katarzyna Jelonek,Arkadiusz Orchel,Janusz Kasperczyk,Yuandou Wang,Feng Su,Suming Li

DOI: https://doi.org/10.1016/j.ijbiomac.2020.03.094

2020-07-01

Abstract:Fully bio-based amphiphilic diblock copolymers were synthesized from hydroxypropyl methyl cellulose (HPMC) and amino-terminated poly(l-lactide) (PLLA) or poly(l-lactide-co-dl-lactide) (PLA) by reductive amination. The resulting HPMC-PLLA and HPMC-PLA copolymers with various hydrophobic block lengths were characterized by NMR, DOSY-NMR and FT-IR. Micelles were obtained by self-assembly of copolymers in aqueous medium. The micelles are spherical in shape, and the micelle size ranges from 150 to 180 nm with narrow distribution. The critical micelle concentration decreases with increasing PLA block length. Paclitaxel was loaded in micelles. Enhanced drug loading is obtained with increase of PLA block length. A biphasic release profile is observed with a burst of 40% followed by slower release up to 80%. MTT assay indicates the good cytocompatibility of HPMC-PLA micelles. SRB assay shows a significant cytotoxicity of paclitaxel-loaded micelles against SK-BR-3cells. It is thus concluded that bio-based HPMC-PLA block copolymers could be promising nano-carrier of anti-tumor drugs.
Thermo and pH dual-responsive drug-linked pseudo-polypeptide micelles with a comb-shaped polymer as a micellar exterior

Weizhi Chen,Liling Su,Peng Zhang,Cheng Li,Dan Zhang,Wei Wu,Xiqun Jiang

DOI: https://doi.org/10.1039/c7py01389b

IF: 4.6

2017-01-01

Polymer Chemistry

Abstract:Herein, thermo and pH dual-responsive drug-linked pseudo-polypeptide micelles were prepared by a self-assembly strategy. Initially, a temperature-responsive comb-shaped poly(2-isopropyl-2-oxazoline)-b- linear poly(acrylic acid) block copolymer (CPiPrOx-b-PAA) was synthesized through a combination of living cationic ring-opening polymerization and living radical polymerization. Subsequently, conjugation of doxorubicin (DOX) with the linear PAA block through a pH-responsive acylhydrazone bond led to a block copolymer having an amphiphilic characteristic, and this block copolymer then self-assembled into CPiPrOx-b-PAA-DOX micelles. TEM and DLS measurements showed that the CPiPrOx-b-PAA-DOX micelles had a uniform spherical morphology with a solid size of about 50 nm and a hydrodynamic size of about 123 nm. Moreover, the micelle coating of comb-shaped poly(2-isopropyl-2-oxazoline) displayed a temperature-responsive behavior with a phase transition temperature of 45 degrees C. The CPiPrOx-b-PAA-DOX micelles showed a pH-responsive DOX release in vitro; this confirmed the acid-liable effect of the acylhydrazone bond that linked the linear PAA block with DOX. In in vitro cell test, a dose-dependent cytotoxicity and caveolae-mediated endocytosis of the CPiPrOx-b-PAA-DOX micelles were observed. Based on near-infrared fluorescence (NIRF) imaging, a significant tumor accumulation of the CPiPrOx-b-PAA-DOX micelles was observed when the dye-labeled CPiPrOx-b-PAA-DOX micelles were intravenously injected into H22 tumor-bearing mice.
Polymersomes from Dual Responsive Block Copolymers: Drug Encapsulation by Heating and Acid-Triggered Release

Zeng-Ying Qiao,Ran Ji,Xiao-Nan Huang,Fu-Sheng Du,Rui Zhang,De-Hai Liang,Zi-Chen Li

DOI: https://doi.org/10.1021/bm400180n

2013-01-01

Biomacromolecules

Abstract:A series of well-defined thermoresponsive diblock copolymers (PEO45-b-PtNEAn, n=22, 44, 63, 91, 172) were prepared by the atom transfer radical polymerization of trans-N-(2-ethoxy-1,3-dioxan-5-yl) acrylamide (tNEA) using a poly(ethylene oxide) (PEO45) macroinitiator. All copolymers are water-soluble at low temperature, but upon quickly heating to 37 °C, laser light scattering (LLS) and transmission electron microscopy (TEM) characterizations indicate that these copolymers self-assemble into aggregates with different morphologies depending on the chain length of PtNEA and the polymer concentration; the morphologies gradually evolved from spherical solid nanoparticles to a polymersome as the degree of polymerization ("n") of PtNEA block increased from 22 to 172, with the formation of clusters with rod-like structure at the intermediate PtNEA length. Both the spherical nanoparticle and the polymersome are stable at physiological pH but susceptible to the mildly acidic medium. Acid-triggered hydrolysis behaviors of the aggregates were investigated by LLS, Nile red fluorescence, TEM, and (1)H NMR spectroscopy. The results revealed that the spherical nanoparticles formed from PEO45-b-PtNEA44 dissociated faster than the polymersomes of PEO45-b-PtNEA172, and both aggregates showed an enhanced hydrolysis under acidic conditions. Both the spherical nanoparticle and polymersome are able to efficiently load the hydrophobic doxorubicin (DOX), and water-soluble fluorescein isothiocyanate-lysozyme (FITC-Lys) can be conveniently encapsulated into the polymersome without using any organic solvent. Moreover, FITC-Lys and DOX could be coloaded in the polymersome. The drugs loaded either in the polymersome or in the spherical nanoparticle could be released by acid triggering. Finally, the DOX-loaded assemblies display concentration-dependent cytotoxicity to HepG2 cells, while the copolymers themselves are nontoxic.
Modulating Drug Release from Short Poly(ethylene Glycol) Block Initiated Poly(L-lactide) Di-block Copolymers

Zein Azhari,Patricia Smith,Sean McMahon,Wenxin Wang,Ruth E. Cameron

DOI: https://doi.org/10.1007/s11095-022-03228-8

IF: 4.58

2023-01-01

Pharmaceutical Research

Abstract:This paper investigates drug release from a novel series of mPEG-functionalised PLLA polymers whose individual components (PEG and PLLA) have regulatory FDA approval. Two processing methods were explored to understand their effect on the morphology and drug release profiles of the polymers, with and without mPEG functionalisation. In the first method the polymer and Propranolol.HCl drug powders were mixed together before injection moulding. In the second method, supercritical CO2 was used to mix the polymer and drug before injection moulding. When non-functionalised PLLA was processed through injection moulding alone, there were no signs of polymer-drug interaction, and the drug was confined to crystals on the surface. This resulted in up to 85 wt% burst release of propranolol.HCl after one day of incubation. By contrast, injection moulding of mPEG-functionalised polymers resulted in the partial dissolution of drug in the polymer matrix and a smaller burst (50 wt% drug) followed by sustained release. This initial burst release was completely eliminated from the profile of mPEG-functionalised polymers processed via supercritical CO2. The addition of mPEG facilitated the distribution of the drug into the bulk matrix of the polymer. Paired with supercritical CO2 processing, the drug release profile showed a slow, sustained release throughout the 4 months of the study.
Protein S deficiency in middle‐aged women with stroke

D. Green,J. Otoya,H. Oriba,Richard Rovner

DOI: https://doi.org/10.1212/WNL.42.5.1029

IF: 9.9

1992-05-01

Neurology

Abstract:We examined the relationship between free protein S deficiency and cerebrovascular disease by reviewing the records of all patients with the diagnoses of cerebral thrombosis, cerebral embolism, and cerebral vascular occlusion who were referred for coagulation studies over a 12-month period. We assayed for free protein S antigen, protein C antigen, and antithrombin III and tested for lupus-like anticoagulant and anticardiolipin antibody. Twenty two of 267 patients (8.2%) admitted with thrombotic strokes were referred for coagulation studies. Free protein S antigen was significantly lower in women than in men (62 ± 25% versus 88 ± 24%, p = 0.03; n = 11 in each group). Six women had free protein S antigen levels below the range recorded for a contemporary group of 24 age-matched normal women (17 to 59% versus 70 to 102%, p < 0.001); four of these women had cerebral arterial thrombosis and two had venous dural sinus thrombosis. The six women were aged 29 to 55 at the time of their first strokes; two had family members with protein S deficiency, and one of these had died of a stroke at age 52. Other abnormalities in this population included a positive test for lupus-like anticoagulant or anticardiolipin in five patients, a modest decrease in protein S in two men, and one patient with an isolated deficiency of antithrombin III. We conclude that protein S deficiency may be an important risk factor for stroke in middle-aged women but this requires confirmation by prospective studies in unselected patients.
Ph and Thermo Dual-Responsive Starch-G-p(deaema-co-pegma): Synthesis Via SET-LRP, Self-Assembly and Drug Release Behaviors

Xiaolin Wang,Zhengping Liu,Liyan Huang

DOI: https://doi.org/10.1016/j.reactfunctpolym.2019.05.011

2019-01-01

Abstract:A novel pH and thermo dual-responsive graft copolymer, starch-graft-poly(N,N-diethyl aminoethyl methacrylate-co-poly(ethylene glycol) methyl ether methacrylate) [starch-g-P(DEAEMA-co-PEGMA)], was successfully synthesized through single-electron transfer living radical polymerization (SET-LRP). The structure and molecular weight of the grafted chains were confirmed by H-1 NMR. These graft copolymers can self-assemble into micelles with starch backbone and PDEAEMA as the core and PPEGMA as the corona in water at pH 7.4. The critical micelle concentration (CMC) of the graft copolymers varied between 0.0313 and 0.1364 mg/mL, decreasing with an increase in the molecular weight of the grafted chains and the ratio of PDEAEMA and PPEGMA segments. The pH and thermo dual-responsive behaviors of starch-g-P(DEAEMA-co-PEGMA) micelles were investigated by DLS and TEM. As the pH decreasd from 8.0 to 5.5, the micelle sizes continued to increase due to the protonation of the PDEAEMA segments, and as the pH decreased to below 5.5, the micelles began to disassemble, which was verified by TEM observations. Upon heating, the size of the micelles decreased because of the shrinkage of the PDEAEMA segments. The pH and thermo dual-responsive behaviors of the starch-g-P(DEAEMA-co-PEGMA) micelles are reversible. Doxorubicin (DOX), a hydrophobic drug, was encapsulated in the micelles, and in vitro release from the drug-loaded micelles displayed good pH-responsive behavior.
Poly(lactic Acid)/poly(ethylene Glycol) Supramolecular Diblock Copolymers Based on Three-Fold Complementary Hydrogen Bonds: Synthesis, Micellization, and Stimuli Responsivity

Xiaohua Chang,Chenlei Ma,Guorong Shan,Yongzhong Bao,Pengju Pan

DOI: https://doi.org/10.1016/j.polymer.2016.03.015

IF: 4.6

2016-01-01

Polymer

Abstract:Thymine-terminated poly(lactic acid) (PLA-THY) and diaminotriazine-terminated poly(ethylene glycol) (PEG-DAT) are synthesized and they can form the supramolecular amphiphilic diblock copolymers in solution through the thymine/diaminotriazine complementary hydrogen bonding interactions. Such supramolecular copolymers self-assemble into the stimuli-responsive micelles in aqueous solution. Micelle size, crystalline state, stimuli responsibility, drug loading and release behavior of the supramolecular micelles can be readily tuned from the block length, stereostructure, homo and stereocomplex crystallizations of hydrophobic PLA blocks. The enantiomerically-mixed supramolecular copolymers with both poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) blocks assemble into the stereocomplexed micelles, while those having the isotactic PLLA (or PDLA) and atactic poly(d,l-lactic acid) (PDLLA) blocks form the homocrystalline and amorphous micelles, respectively. The stereocomplexed and amorphous micelles exhibit smaller size than their homocrystalline analogs, all of which are much larger than the micelles formed from the conventional covalently-bonded diblock copolymers. The supramolecular micelles are sensitive to the external stimuli such as pH and ion. The homocrystalline and stereocomplexed micelles undergo fast aggregation in the acidic and salted solutions due to the disassociation of complementary hydrogen bonds. The stereocomplexed micelles exhibit larger drug loading content and slower drug release rate than the amorphous and homocrystalline ones, because of the larger polymer/drug interactions and tighter chain packing inside the micelle cores.
Self-assembled pH-responsive MPEG-b-(PLA-co-PAE) block copolymer micelles for anticancer drug delivery

Can Yang Zhang,You Qiang Yang,Tu Xiong Huang,Bin Zhao,Xin Dong Guo,Ju Fang Wang,Li Juan Zhang

DOI: https://doi.org/10.1016/j.biomaterials.2012.05.025

IF: 14

2012-09-01

Biomaterials

Abstract:A series of amphiphilic pH-responsive poly (ethylene glycol) methyl ether-b-(poly lactic acid-co-poly (β-amino esters)) (MPEG-b-(PLA-co-PAE)) block copolymers with different PLA/PAE ratios were designed and synthesized via a Michael-type step polymerization. The molecular structures of the copolymers were confirmed with (1)H NMR and gel permeation chromatography (GPC). These amphiphilic copolymers were shown to self-assemble into core/shell micelles in aqueous solution at low concentrations, and their critical micelle concentrations (CMC) in water were 1.2-9.5 mg/L. The pH-responsive PAE segment was insoluble at pH 7.4, but it became positively charged and soluble via protonation of amino groups at pH lower than 6.5. The average particle size and zeta potential of micelles increased from 180 nm and 15 mV to 220 nm and 40 mV, respectively, when the pH decreased from 7.4 to 5.0. Doxorubicin (DOX) was loaded into the core of these micelles with a high drug loading of 18%. The in vitro DOX release from the micelles was significantly accelerated when solution pH decreased from 7.4 to 5.0. DOX release in the first 10 h appeared to follow Fickian diffusion mechanism. Toxicity test showed that the copolymers had low toxicity whereas the DOX-loaded micelles remained high cytotoxicity for HepG2 cells. The results indicate the pH-sensitive MPEG-b-(PLA-co-PAE) micelle may be a potential hydrophobic drug delivery carrier for cancer targeting therapy with sustained release.

engineering, biomedical,materials science, biomaterials
Temperature and Photo Dual-Stimuli Responsive Block Copolymer Self-Assembly Micelles for Cellular Controlled Drug Release.

Jianguo Zhang,Qing Chen,Yanling Luo,Yashao Chen,Feng Xu,Ziwei Zhou

DOI: https://doi.org/10.1002/mabi.202000291

2020-12-16

Macromolecular Bioscience

Abstract:To well adapt to the complicated physiological environments, it is necessary to engineer dual- and/or multi-stimuli responsive drug carriers for more effective drug release. For this, a novel temperature responsive lateral chain photosensitive block copolymer, poly[(N-isopropylacrylamide-co-N,N-dimethylacrylamide) -block-propyleneacylalkyl-4-azobenzoate] (P(NIPAM-co-DMAA)-b-PAzoHPA), is synthesized by atom transfer radical polymerization. The structure is characterized by 1 H nuclear magnetic resonance spectrometry and laser light scattering gel chromatography system. The self-assembly behavior, morphology, and sizes of micelles are investigated by fluorescence spectroscopy, transmission electron microscope, and laser particle analyzer. Dual responsiveness to light and temperature is explored by ultraviolet-visible absorption spectroscopy. The results show that the copolymer micelles take on apparent light and temperature dual responsiveness, and its lower critical solution temperature (LCST) is above 37 °C, and changes with the trans-/cis- isomerization of azobenzene structure under UV irradiation. The blank copolymers are nontoxic, whereas the paclitaxel (PTX)-loaded counterparts possessed comparable anticancer activities to free PTX, with entrapment efficiency of 83.7%. The PTX release from the PTX-loaded micelles can be mediated by changing temperature and/or light stimuli. The developed block copolymers can potentially be used for cancer therapy as drug controlled release carriers.

Chemistry,Medicine,Materials Science
Study on the preparation and activity of intelligent response poly(lactic-co-glycolic acid)-ss-polyethylene glycol copolymer micelles

Siying Wang,Lanlan Xie,Yanjie Liu,Qilei Yang,Wenqiang Jia,Dongmei Zhao,Xiuhua Zhao

DOI: https://doi.org/10.1177/08853282221088182

2022-05-10

Journal of Biomaterials Applications

Abstract:Journal of Biomaterials Applications, Ahead of Print. Amphiphilic polymer micellar carriers are the most commonly used nanocarriers for oral delivery of hydrophobic drugs because their hydrophilic shell can avoid the recognition of the reticuloendothelial system (RES), has excellent drug-carrying capacity, and protect the drug from inactivation in the gastrointestinal fluid. The polymer micelle shell can enter cancer cells by endocytosis, and autophagy in cells, degradation by lysosomal pathway, so as to release drugs, prolong the circulation time of drugs in vivo, and then achieve the effect of drug sustained release. In this study, the glutathione-responsive PLGA-ss-PEG loaded paclitaxel (PTX) micelles (PLGA-ss-PEG-PTX) were developed for anticancer therapy. With its long-term circulation and EPR (enhanced permeability and retention) effect, and the micelle had disulfide bond, which could be used as the recognition group of tumor microenvironment, so that the PLGA-ss-PEG-PTX could specifically accumulate at the tumor site, so as to produce better anti-tumor effect. The PLGA-ss-PEG-PTX was formulated by the emulsification method in this study. The drug loading was about 21.54%, the entrapment efficiency was about 94.2%, and the particle size range was about 90 nm with narrow particle size distribution. Cytotoxicity and embryonic toxicity experiments were carried out using mouse lung cancer cells (LLC) and zebrafish fertilized eggs. It was proved that the low concentration of blank micelles had little cytotoxicity, but high concentration of blank micelles had adverse effects on zebrafish embryonic development, resulting in embryonic malformation. The uptake of drugs by cancer cells was studied by a high connotation cell imaging analysis system. The experiments showed that the drug molecules encapsulated in micelles could achieve higher uptake by cells compared with free drug molecules. In addition, in the in vivo evaluation experiment of drugs, the PLGA-ss-PEG-PTX could significantly enhance the therapeutic effect of the PTX, improve its water solubility, and improve its oral bioavailability.

engineering, biomedical,materials science, biomaterials
Thermo and Ph Dual Responsive, Polymer Shell Coated, Magnetic Mesoporous Silica Nanoparticles for Controlled Drug Release

Baisong Chang,Xianyi Sha,Jia Guo,Yunfeng Jiao,Changchun Wang,Wuli Yang

DOI: https://doi.org/10.1039/c1jm10631g

2011-01-01

Journal of Materials Chemistry

Abstract:In this paper, a kind of core-shell composite microsphere was prepared based on poly(N-isopropylacrylamide-co-methacrylic acid) (P(NIPAM-co-MAA)) coated magnetic mesoporous silica nanoparticles (M-MSN) via precipitation polymerization. The composite microsphere presented a thermo/pH-coupling sensitivity and the volume phase transition could be precisely regulated by the molar ratio of MAA to NIPAM or the concentration of NaCl. At physiological conditions (37 degrees C, 0.15 M NaCl), the P(NIPAM-co-MAA) shell underwent a distinct transition from a swollen state in pH 7.4 to a collapsed state in pH 5.0, so that the polymer shell was active in moderating the diffusion of embedded drugs in-and-out of the pore channels of MSN. Doxorubicin hydrochloride (DOX) was applied as a model drug and the behaviors of drug storage/release were investigated. The drug loaded behavior was pH-dependent, and the composite microsphere had a drug embed efficiency of about 91.3% under alkaline conditions. The cumulative in vitro release of the DOX-loaded composite microsphere showed a low level of leakage below the volume phase transition temperature (VPTT) and was significantly enhanced above its VPTT, exhibiting an apparent thermo/pH-response controlled drug release. The cytotoxicity assay of a blank carrier to normal cells indicated that the composite microspheres were suitable as drug carriers, while the DOX-loaded composite microspheres had a similar cytotoxicity to HeLa cells compared with free DOX. Therefore, the thermo/pH-sensitive composite microsphere could, in principle, be used for in vivo cancer therapy with a low premature drug release during blood circulation whilst having a rapid release upon reaching tumor tissues.
Synthesis and pH-responsive self-assembly behavior of a fluorescent amphiphilic triblock copolymer mPEG-b-PCL-b-PDMAEMA-g-PC for the controlled intracellular delivery of doxorubicin

Qikui Fan,Lulu Wei,Zhiyong Liu,Beibei Lu,Xuhong Guo,Jun Hou,Lei Li,Jianning Wu

DOI: https://doi.org/10.1039/C6RA01504B

2016-03-11

Abstract:In this work, well-defined pH-responsive methoxy poly(ethylene glycol)-block-poly(e-caprolactone)-block-poly[2-(dimethylamino)ethyl methacrylate]-g-7-propinyloxy coumarin triblock amphiphilic copolymers (mPEG-b-PCL-b-PDMAEMA-g-PC) were synthesized using a combination of atom transfer radical polymerization (ATRP), ring opening polymerization (ROP) and click chemistry. The chemical structures and compositions of these copolymers were characterized using Fourier transform infrared spectroscopy (FT-IR) and proton nuclear magnetic resonance (1H NMR). The molecular weights of the copolymers were obtained using 1H NMR spectroscopy and gel permeation chromatography (GPC) measurements. Subsequently, the polymers could self-assemble into micelles which were investigated using dynamic light scattering (DLS), transmission electron microscopy (TEM), and fluorescence spectroscopy. The pH-responsive self-assembly behavior of these triblock copolymers in water were investigated at different pH values of 5 and 7.4 for controlled doxorubicin release, the results indicated that the release rate of DOX could be effectively controlled by altering the pH, DOX was sealed in neutral surroundings and DOX release was triggered in acidic surroundings. CCK-8 assays and confocal laser scanning microscopy (CLSM) against HeLa cells indicated that the micelles had no associated cytotoxicity, possessed good biodegradability and biocompatibility, and identified the location of the DOX in HeLa cells. The DOX-loaded micelles possessed high cytotoxicity to HeLa cells and exhibited inhibition of the proliferation of HeLa cells. Moreover, these flexible micelles with an on–off switched drug release may offer a promising pattern to deliver a wide variety of hydrophobic payloads to tumor cells for cancer therapy.

Medicine,Materials Science,Chemistry
Light And Ph Dual-Degradable Triblock Copolymer Micelles For Controlled Intracellular Drug Release

Qiao Jin,Tongjiang Cai,Haijie Han,Haibo Wang,Yin Wang,Jian Ji

DOI: https://doi.org/10.1002/marc.201400171

IF: 5.006

2014-01-01

Macromolecular Rapid Communications

Abstract:A novel amphiphilic ABA-type triblock copolymer poly(ethylene glycol)-b-poly(ethanedithiol-altnitrobenzyl)- b-poly(ethylene glycol) (PEG-b-PEDNB-b-PEG) is successfully prepared by sequential thiol-acrylate Michael addition polymerization in one pot. PEG-b-PEDNB-b-PEG is designed to have light-cleavable o-nitrobenzyl linkages and acid-labile beta-thiopropionate linkages positioned repeatedly in the main chain of the hydrophobic block. The light and pH dual degradation of PEG-b--PEDNB-b -PEG is traced by gel permeation chromatography (GPC). Such triblock copolymer can self-assemble into micelles, which can be used to encapsulate anticancer drug doxorubicin (DOX). Because of the different degradation chemistry of o-nitrobenzyl linkages and beta-thiopropionate linkages, DOX can be released from the micelles by two different manners, i.e., light-induced rapid burst release and pH-induced slow sustained release. Confocal laser scanning microscopy (CLSM) results indicated that DOX-loaded micelles exhibited faster drug release in A549 cells after UV irradiation. Furthermore, 3-(4,5-dimethylthiazol- 2-yl)-2,5-diphenyltetrazolium bromide (MTT) results show that the DOX-loaded micelles under UV light degradation exhibit better anticancer activity against A549 cells than that of the nonirradiated ones.

Eicosapentaenoic acid decreases postprandial beta-hydroxybutyrate and free fatty acid responses in healthy young and elderly.

Thermosensitive Polymeric Micelles Based On The Triblock Copolymer Poly(D,L-Lactide)-B-Poly(N-Isopropyl Acrylamide)-B-Poly(D,L-Lactide) For Controllable Drug Delivery

Novel Amphiphilic, Biodegradable, Biocompatible, Thermo-Responsive ABA Triblock Copolymers Based on PCL and PEG Analogues via a Combination of ROP and RAFT: Synthesis, Characterization, and Sustained Drug Release from Self-Assembled Micelles

Preparation and Characterization of Thermo-Sensitive Mixed Micelles and in Vitro Drug Release

Thermally Responsive Polymeric Micelles Self-Assembled By Amphiphilic Polyphosphazene With Poly(N-Isopropylacrylamide) And Ethyl Glycinate As Side Groups: Polymer Synthesis, Characterization, And In Vitro Drug Release Study

Thermally responsive polymeric micelles self-assembled by amphiphilic polyphosphazene with poly(N-isopropylacrylamide) and ethyl glycinate as side groups: polymer synthesis, characterization, and in vitro drug release study.

Synthesis, Self‐Assembly and Drug Controlled Releasing Performance of Triple Responsive Ternary Copolymer Micelles

A hyperbranched amphiphilic acetal polymer for pH-sensitive drug delivery

Self-assembled micelles prepared from bio-based hydroxypropyl methyl cellulose and polylactide amphiphilic block copolymers for anti-tumor drug release

Thermo and pH dual-responsive drug-linked pseudo-polypeptide micelles with a comb-shaped polymer as a micellar exterior

Polymersomes from Dual Responsive Block Copolymers: Drug Encapsulation by Heating and Acid-Triggered Release

Modulating Drug Release from Short Poly(ethylene Glycol) Block Initiated Poly(L-lactide) Di-block Copolymers

Protein S deficiency in middle‐aged women with stroke

Ph and Thermo Dual-Responsive Starch-G-p(deaema-co-pegma): Synthesis Via SET-LRP, Self-Assembly and Drug Release Behaviors

Poly(lactic Acid)/poly(ethylene Glycol) Supramolecular Diblock Copolymers Based on Three-Fold Complementary Hydrogen Bonds: Synthesis, Micellization, and Stimuli Responsivity

Self-assembled pH-responsive MPEG-b-(PLA-co-PAE) block copolymer micelles for anticancer drug delivery

Temperature and Photo Dual-Stimuli Responsive Block Copolymer Self-Assembly Micelles for Cellular Controlled Drug Release.

Study on the preparation and activity of intelligent response poly(lactic-co-glycolic acid)-ss-polyethylene glycol copolymer micelles

Thermo and Ph Dual Responsive, Polymer Shell Coated, Magnetic Mesoporous Silica Nanoparticles for Controlled Drug Release

Synthesis and pH-responsive self-assembly behavior of a fluorescent amphiphilic triblock copolymer mPEG-b-PCL-b-PDMAEMA-g-PC for the controlled intracellular delivery of doxorubicin

Light And Ph Dual-Degradable Triblock Copolymer Micelles For Controlled Intracellular Drug Release