The effectiveness of a stress coping program based on mindfulness meditation on the stress, anxiety, and depression experienced by nursing students in Korea.

Yune-Sik Kang,S. Choi,E. Ryu

DOI: https://doi.org/10.1016/j.nedt.2008.12.003

IF: 3.906

2009-07-01

Nurse Education Today

Abstract:

What problem does this paper attempt to address?

A Wearable Health Monitoring System with Multi-Parameters

Jun Liu,Fei Xie,Yaqi Zhou,Qian Zou,Jianfeng Wu

DOI: https://doi.org/10.1109/bmei.2013.6746958

2013-01-01

Abstract:A novel wearable health monitoring system with multi-parameters and its applications for long term monitoring are presented in this paper. The system provides continuous monitoring of the user's electrocardiogram (ECG), respiratory status and activity, as well as the local temperature. A belt-type data acquisition and communication module worn around the chest includes ECG and respiratory module ADS1292R, six axis motion sensor MPU6050, high precision digital temperature sensor Tsic506 and bluetooth 4.0 module CC2541. The collected data is sent to the mobile device via bluetooth and the mobile device gives a heart health index of measuring the body status which includes heart rate, QRS wave, and ST segment. A remote interactive way is constructed by the mobile device communicating with the customer management center via WIFI.
Bluetooth-Based Wearable Human Respiratory Parameter Monitoring System Design

Feiba Chang,Jun Yin,Lexian Yan,Run Peng

DOI: https://doi.org/10.4028/www.scientific.net/amm.433-435.161

2013-01-01

Applied Mechanics and Materials

Abstract:Designed a Bluetooth-based wearable SAHS (sleep apnea hypopnea syndrome) monitoring device, the device can be real-time monitoring in the SAHS patient's respiratory state. Meanwhile, wearable technology achieves basic respiratory signal acquisition for low physiological and psychological load; Bluetooth achieves short-distance wireless transmission of respiration data and convenient communication with the handheld terminal such as PDA or smart phone, to ensure the continuous real-time monitoring of the patient.
A Wearable Multimodal Wireless Sensing System for Respiratory Monitoring and Analysis

Kee S Moon,Sung Q Lee,Kee S. Moon

DOI: https://doi.org/10.3390/s23156790

IF: 3.9

2023-07-30

Sensors

Abstract:Wireless sensing systems are required for continuous health monitoring and data collection. It allows for patient data collection in real time rather than through time-consuming and expensive hospital or lab visits. This technology employs wearable sensors, signal processing, and wireless data transfer to remotely monitor patients' health. The research offers a novel approach to providing primary diagnostics remotely with a digital health system for monitoring pulmonary health status using a multimodal wireless sensor device. The technology uses a compact wearable with new integration of acoustics and biopotentials sensors to monitor cardiovascular and respiratory activity to provide comprehensive and fast health status monitoring. Furthermore, the small wearable sensor size may stick to human skin and record heart and lung activities to monitor respiratory health. This paper proposes a sensor data fusion method of lung sounds and cardiograms for potential real-time respiration pattern diagnostics, including respiratory episodes like low tidal volume and coughing. With a p-value of 0.003 for sound signals and 0.004 for electrocardiogram (ECG), preliminary tests demonstrated that it was possible to detect shallow breathing and coughing at a meaningful level.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Reliable Breathing Tracking With Wearable Mask Device

Vishal Varun Tipparaju,Xiaojun Xian,Devon Bridgeman,Di Wang,Francis Tsow,Erica Forzani,Nongjian Tao

DOI: https://doi.org/10.1109/JSEN.2020.2969635

IF: 4.3

2020-01-01

IEEE Sensors Journal

Abstract:Breathing tracking is critical for the assessment of lung functions, exercise physiologies, and energy expenditure. Conventional methods require using a face mask or mouthpiece that is connected to a stationary equipment through a tube, restricting the location, movement, or even the posture. To obtain accurate breathing physiology parameters that represent the true state of the patient during different scenarios, a wearable technology that has less intervention to patient's activities in free-living conditions is highly preferred. Here, we propose a miniaturized, reliable, and wide-dynamic ranged flow sensing technology that is immune to orientation, movement, and noise. As far as we know, this is the first work of introducing a fully integrated mask device focusing on breath tracking in free-living conditions. There are two key challenges for achieving this goal: miniaturized flow sensing and motion-induced artifacts elimination. To address these challenges, we come up with two technical innovations: 1) in hardware wise, we have designed an integrated flow sensing technique based on differential pressure Pneumotach approach and motion sensing; 2) in software wise, we have developed comprehensive algorithms based baseline tracking and orientation and motion compensation. The effectiveness of the proposed technology has been proven by the experiments. Experimental results from simulator and real breath conditions show high correlation (R-2 = 0.9994 and 0.9964 respectively) and mean error within 2.5% for Minute Volume (VE), when compared to values computed from reference methods. These results show that the proposed method is accurate and reliable to track the key breath parameters in free-living conditions.
Integrated wearable smart sensor system for real-time multi-parameter respiration health monitoring

Yingzhe Li,Chaoran Liu,Haiyang Zou,Lufeng Che,Peng Sun,Jiaming Yan,Wenzhu Liu,Zhenlong Xu,Weihuang Yang,Linxi Dong,Libo Zhao,Xucong Wang,Gaofeng Wang,Zhong Lin Wang

DOI: https://doi.org/10.1016/j.xcrp.2022.101191

IF: 8.9

2023-01-01

Cell Reports Physical Science

Abstract:Monitoring respiration is vital for personal diagnosis of chronic diseases. However, the existing respiratory sensors have severe lim-itations, such as single function, finite detection parameters, and lack of smart signal analysis. Here, we present an integrated wearable and low-cost smart respiratory monitoring sensor (RMS) system with artificial intelligence (AI)-assisted diagnosis of respiratory abnormality by detecting multi-parameters of human respiration. Coupling with intelligent analysis and data mining algorithms embedded in a phone app, the lighter system of 7.3 g can acquire real-time self-calibrated parameters, including breathing frequency, apnea hypopnea index (AHI), vital capacity (VC), peak expiratory flow (PEF), and other respiratory indexes with an accuracy >95.21%. The data can be wirelessly transferred to the user's data cloud terminal. The RMS system enables comprehensive multi -phys-iological parameters analysis for auxiliary diagnosing and classifying diseases, including sleep apnea, rhinitis, and chronic lung diseases, as well as rehabilitation of COVID-19, and exhibits advantages of portable healthcare.
Quantitative and Real‐Time Evaluation of Human Respiration Signals with a Shape‐Conformal Wireless Sensing System

Sicheng Chen,Guocheng Qian,Bernard Ghanem,Yongqing Wang,Zhou Shu,Xuefeng Zhao,Lei Yang,Xinqin Liao,Yuanjin Zheng

DOI: https://doi.org/10.1002/advs.202203460

IF: 15.1

2022-09-21

Advanced Science

Abstract:This work develops a soft, wireless, and non‐invasive device for quantitative and real‐time evaluation of human respiration process. By further proposing a machine learning‐based respiration classification algorithm to accurately recognize body status, individual and group respiratory status can be quantitatively collected, analyzed and stored on system deployed clients for daily physiological signal detections as well as medical assistance. Respiration signals reflect many underlying health conditions, including cardiopulmonary functions, autonomic disorders and respiratory distress, therefore continuous measurement of respiration is needed in various cases. Unfortunately, there is still a lack of effective portable electronic devices that meet the demands for medical and daily respiration monitoring. This work showcases a soft, wireless, and non‐invasive device for quantitative and real‐time evaluation of human respiration. This device simultaneously captures respiration and temperature signatures using customized capacitive and resistive sensors, encapsulated by a breathable layer, and does not limit the user's daily life. Further a machine learning‐based respiration classification algorithm with a set of carefully studied features as inputs is proposed and it is deployed into mobile clients. The body status of users, such as being quiet, active and coughing, can be accurately recognized by the algorithm and displayed on clients. Moreover, multiple devices can be linked to a server network to monitor a group of users and provide each user with the statistical duration of physiological activities, coughing alerts, and body health advice. With these devices, individual and group respiratory health status can be quantitatively collected, analyzed, and stored for daily physiological signal detections as well as medical assistance.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Design and Implementation of an IoT-based Respiratory Motion Sensor

Bardia Baraeinejad,Maryam Forouzesh,Saba Babaei,Yasin Naghshbandi,Yasaman Torabi,Shabnam Fazliani

2024-12-07

Abstract:In the last few decades, several wearable devices have been designed to monitor respiration rate in an effort to capture pulmonary signals with higher accuracy and reduce patients' discomfort during use. In this article, we present the design and implementation of a device for real-time monitoring of respiratory system movements. When breathing, the circumference of the abdomen and thorax changes; therefore, we used a Force Sensing Resistor (FSR) attached to the Printed Circuit Board (PCB) to measure this variation as the patient inhales and exhales. The mechanical strain this causes changes the FSR electrical resistance accordingly. Also, for streaming this variable resistance on an Internet of Things (IoT) platform, Bluetooth Low Energy (BLE) 5 is utilized due to the adequate throughput, high accessibility, and possibility of power consumption reduction. Furthermore, this device presents features such as low power consumption (0.4 mW), high precision, and ease of use.

Signal Processing
Research and Development of an IoT-Based Remote Asthma Patient Monitoring System

Safayat Reza Anan,Md. Azizul Hossain,Md. Zubayer Milky,Mohammad Monirujjaman Khan,Mehedi Masud,Sultan Aljahdali

DOI: https://doi.org/10.1155/2021/2192913

2021-11-30

Journal of Healthcare Engineering

Abstract:This paper presents the research and development of an Internet of Things- (IoT-) based remote health monitoring system for asthmatic patients. Asthma is an inflammatory disease. Asthma causes the lungs to swell and get narrower, making it difficult to carry air in and out of the lungs. This situation makes breathing very difficult. Remote patient monitoring (RPM) is a method of collecting health-related data from patients who are in a remote location and electronically transmitting it to healthcare providers for evaluation and consultation. The aim of this study is to design a monitoring system that allows doctors to monitor asthmatic patients from a remote area. The proposed system will allow patients to measure oxygen saturation (SpO2), heart rate, body temperature, humidity, volatile gases, room temperature, and electrocardiogram (ECG) using various sensors, which will be displayed in an application. This data is then sent to the doctor to monitor the patient’s condition and suggest appropriate actions. Overall, the system consists of an Android application, a website, and various sensors. The Android studio and Java programming language were used to develop the application. For the frontend, the website was built using Hypertext Markup Language (HTML), Cascading Style Sheets (CSS), JavaScript, and jQuery. The system also uses Django, a Python-based open-source web framework, for the backend. The system developed the various sensors using an ESP8266 microcontroller compatible with the Arduino Integrated Development Environment (IDE). The system uses a MAX30100 pulse oximeter and heart rate sensor, a GY-906 MLX90614 noncontact precision thermometer, a DHT11 humidity and temperature sensor, a MQ-135 gas and air quality sensor, and an AD8232 ECG sensor for collecting various parameters that may trigger asthma attacks. Finally, the system developed the Asthma Tracker app and the Asthma Tracker website for remote health monitoring. The system was initially tested on demo patients and later deployed and tested on seven real human test subjects. Overall, the monitoring system produced satisfactory results. The data acquired by the sensors has a high level of accuracy. The system also maintained user-friendliness and low cost.

health care sciences & services
Design of a wearable respiration monitoring system based on pressure sensor

Xiao-yu XIAO,Shan-luo HUANG,Shu-jing CHEN,Yuan-lin SONG,Qing-hui JIN,Jian-long ZHAO

DOI: https://doi.org/10.13873/J.1000-9787(2016)02-0126-04

2016-01-01

Abstract:A wearable respiration monitoring system is designed to help COPD patients complete standard breathing exercise,and system includes respiratory wave sensor,data acquisition circuit board and an application ( APP)software in cell phone. respiratory waveform and respiratory parameters can be shown in real time to patients,compared with standard waveform,according to synchronization prompt tone to correct and complete breathing exercise. Clinical trials prove that this monitoring system can increase lung ventilation of COPD patients and improve their lung function.
In-Home, Smart Sleep Monitoring System for Cardiorespiratory Estimation and Sleep Apnea Detection: Proof of Concept

Mostafa Haghi,Natividad Martínez Madrid,Ralf Seepold

DOI: https://doi.org/10.1109/jsen.2024.3370819

IF: 4.3

2024-01-01

IEEE Sensors Journal

Abstract:Apnea is a sleep disorder characterized by breathing interruptions during sleep, impacting cardiorespiratory function and overall health. Traditional diagnostic methods, like polysomnography (PSG), are unobtrusive, leading to noninvasive monitoring. This study aims to develop and validate a novel sleep monitoring system using noninvasive sensor technology to estimate cardiorespiratory parameters and detect sleep apnea. We designed a seamless monitoring system integrating noncontact force-sensitive resistor sensors to collect ballistocardiogram signals associated with cardiorespiratory activity. We enhanced the sensor’s sensitivity and reduced the noise by designing a new concept of edge-measuring sensor using a hemisphere dome and mechanical hanger to distribute the force and mechanically amplify the micromovement caused by cardiac and respiration activities. In total, we deployed three edge-measuring sensors, two deployed under the thoracic and one under the abdominal regions. The system is supported with onboard signal preprocessing in multiple physical layers deployed under the mattress. We collected the data in four sleeping positions from 16 subjects and analyzed them using ensemble empirical mode decomposition (EMD) to avoid frequency mixing. We also developed an adaptive thresholding method to identify sleep apnea. The error was reduced to 3.98 and 1.43 beats/min (BPM) in heart rate (HR) and respiration estimation, respectively. The apnea was detected with an accuracy of 87%. We optimized the system such that only one edge-measuring sensor can measure the cardiorespiratory parameters. Such a reduction in the complexity and simplification of the instruction of use shows excellent potential for in-home and continuous monitoring.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Advances in Respiratory Monitoring: A Comprehensive Review of Wearable and Remote Technologies

Diana Vitazkova,Erik Foltan,Helena Kosnacova,Michal Micjan,Martin Donoval,Anton Kuzma,Martin Kopani,Erik Vavrinsky

DOI: https://doi.org/10.3390/bios14020090

2024-02-07

Biosensors

Abstract:This article explores the importance of wearable and remote technologies in healthcare. The focus highlights its potential in continuous monitoring, examines the specificity of the issue, and offers a view of proactive healthcare. Our research describes a wide range of device types and scientific methodologies, starting from traditional chest belts to their modern alternatives and cutting-edge bioamplifiers that distinguish breathing from chest impedance variations. We also investigated innovative technologies such as the monitoring of thorax micromovements based on the principles of seismocardiography, ballistocardiography, remote camera recordings, deployment of integrated optical fibers, or extraction of respiration from cardiovascular variables. Our review is extended to include acoustic methods and breath and blood gas analysis, providing a comprehensive overview of different approaches to respiratory monitoring. The topic of monitoring respiration with wearable and remote electronics is currently the center of attention of researchers, which is also reflected by the growing number of publications. In our manuscript, we offer an overview of the most interesting ones.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation
A Wearable Medical Sensor for Provisional Healthcare

Amir Javadpour,HamidrezaMemarzadeh-Tehran

DOI: https://doi.org/10.48550/arXiv.1907.08598

2019-07-18

Abstract:Thispaper presents the design and realization of a context-aware wireless health monitoring system for recording the heartbeat (HR) and respiration (RR) rate based on an indirect measurement approach. The system consists of a contact-less medical sensor as well as a communication infrastructure for handling the transmission and reception of the measured results. The contact-less sensor includes a highly sensitive tri-axial accelerometer, an accurate temperature and air pressure sensor that enable one to inspect patients' health condition by continuously monitoring of two critical signs related to the cardiorespiratory system. The developed system can also be utilized in performing a number of long-term inspection on the heart and lungs while measuring the HR and RR values in addition to calculating the HR and RR ratio, which is denoted by HRR. The obtained results show the potential of the developed system for versatile monitoring applications applied to telemedicine

Human-Computer Interaction
Contactless Respiration Monitoring Using Ultrasound Signal With Off-The-Shelf Audio Devices

Tianben Wang,Daqing Zhang,Leye Wang,Yuanqing Zheng,Tao Gu,Bernadette Dorizzi,Xingshe Zhou

DOI: https://doi.org/10.1109/JIOT.2018.2877607

IF: 10.6

2019-01-01

IEEE Internet of Things Journal

Abstract:Recent years have witnessed advances of Internet of Things technologies and their applications to enable contact-less sensing and elderly care in smart homes. Continuous and real-time respiration monitoring is one of the important applications to promote assistive living for elders during sleep and attracted wide attention in both academia and industry. Most of the existing respiration monitoring systems require expensive and specialized devices to sense chest displacement. However, chest displacement is not a direct indicator of breathing and thus false detection may often occur. In this paper, we design and implement a real-time and contactless respiration monitoring system by directly sensing the exhaled airflow from breathing using ultrasound signals with off-the-shelf speaker and microphone. Exhaled airflow from breathing can be regarded as air turbulence, which scatters the sound wave and results in Doppler effect. Our system works as an acoustic radar which transmits sound wave and detects the Doppler effect caused by breathing airflow. We mathematically model the relationship between the Doppler frequency change and the direction of breathing airflow. Based on this model, we design a minimum description length-based algorithm to effectively capture the Doppler effect caused by exhaled airflow. We conduct extensive experiments with 25 participants (7 elders, 2 young kids, and 16 adults, including 11 females and 14 males) in four different rooms. The participants take four different sleep postures (lying on one's back, on right/left side, and on one's stomach) in different positions of the bed. Experiment results show that our system achieves a median error lower than 0.3 breaths/min (2%) for respiration monitoring and can accurately identify Apnea. The results also demonstrate that the system is robust to different respiration styles (shallow, normal, and deep), respiration rate variation, ambient noise, sensing distance variation (within 0.7 m), and transmitted signal frequency variation.
Development and Validation of a Portable EIT System for Real-Time Respiratory Monitoring

Fabian Alvarado-Arriagada,Bruno Fernández-Arroyo,Samuel Rebolledo,Esteban J. Pino

DOI: https://doi.org/10.3390/s24206642

IF: 3.9

2024-10-16

Sensors

Abstract:This work contributes to the improvement of novel medical technologies for the prevention and treatment of diseases. Electrical impedance tomography (EIT) has gained attention as a valuable tool for non-invasive monitoring providing real-time insights. The purpose of this work is to develop and validate a novel portable EIT system with a small form factor for respiratory monitoring. The device uses a 16-electrode architecture with adjacent stimulation and measurement patterns, an integrated circuit current source and a single high-speed ADC operating with multiplexers to stimulate and measure across all electrodes. Tests were conducted on 25 healthy subjects who performed a pulmonary function test with a flowmeter while using the EIT device. The results showed a good performance of the device, which was able to recognize all respirations correctly, and from the EIT signals and images, correlations of 96.7% were obtained for instantaneous respiratory rate and 96.1% for tidal volume prediction. These results validate the preliminary technical feasibility of the EIT system and demonstrates its potential as a reliable tool for non-invasive respiratory assessment. The significance of this work lies in its potential to democratize advanced respiratory monitoring technologies, making them accessible to a wider population, including those in remote or underserved areas.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
UbiBreathe: A Ubiquitous non-Invasive WiFi-based Breathing Estimator

Heba Abdelnasser,Khaled A. Harras,Moustafa Youssef

DOI: https://doi.org/10.48550/arXiv.1505.02388

2015-05-10

Abstract:Monitoring breathing rates and patterns helps in the diagnosis and potential avoidance of various health problems. Current solutions for respiratory monitoring, however, are usually invasive and/or limited to medical facilities. In this paper, we propose a novel respiratory monitoring system, UbiBreathe, based on ubiquitous off-the-shelf WiFi-enabled devices. Our experiments show that the received signal strength (RSS) at a WiFi-enabled device held on a person's chest is affected by the breathing process. This effect extends to scenarios when the person is situated on the line-of-sight (LOS) between the access point and the device, even without holding it. UbiBreathe leverages these changes in the WiFi RSS patterns to enable ubiquitous non-invasive respiratory rate estimation, as well as apnea detection. We propose the full architecture and design for UbiBreathe, incorporating various modules that help reliably extract the hidden breathing signal from a noisy WiFi RSS. The system handles various challenges such as noise elimination, interfering humans, sudden user movements, as well as detecting abnormal breathing situations. Our implementation of UbiBreathe using off-the-shelf devices in a wide range of environmental conditions shows that it can estimate different breathing rates with less than 1 breaths per minute (bpm) error. In addition, UbiBreathe can detect apnea with more than 96% accuracy in both the device-on-chest and hands-free scenarios. This highlights its suitability for a new class of anywhere respiratory monitoring.

Other Computer Science
A New Smartphone-Based Method for Remote Health Monitoring: Assessment of Respiratory Kinematics

Emanuele Vignali,Emanuele Gasparotti,Luca Miglior,Vincenzo Gervasi,Lorenzo Simone,Dorela Haxhiademi,Lara Frediani,Gabriele Borelli,Sergio Berti,Simona Celi

DOI: https://doi.org/10.3390/electronics13061132

IF: 2.9

2024-03-21

Electronics

Abstract:The remote monitoring of clinical parameters plays a fundamental role in different situations, like pandemic health emergencies and post-surgery conditions. In these situations, the patients might be impeded in their movements, and it could be difficult to have specific health monitoring. In recent years, technological advances in smartphones have opened up new possibilities in this landscape. The present work aims to propose a new method for respiratory kinematics monitoring via smartphone sensors. In particular, a specific application was developed to register inertial measurement unit (IMU) sensor data from the smartphone for respiratory kinematics measurement and to guide the user through a specific acquisition session. The session was defined to allow the monitoring of the respiratory movement in five prescribed positions. The application and the sequence were successfully tested on a given population of 77 healthy volunteers. The resulting accelerometers and gyroscope signals were processed to evaluate the significance of differences according to participants' sex, vector components, and smartphone positioning and, finally, to estimate the respiratory rate. The statistical differences that emerged revealed the significance of information in the different acquisition positions.

engineering, electrical & electronic,computer science, information systems,physics, applied
Breathing Pattern Monitoring using Remote Sensors

Janosch Kunczik,Kerstin Hubbermann,Lucas Mösch,Andreas Follmann,Michael Czaplik,Carina Barbosa Pereira

DOI: https://doi.org/10.48550/arXiv.2210.08799

IF: 4.729

2022-10-17

Signal Processing

Abstract:Breathing is one of the most important body functions because it provides it with oxygen, which is vital for energy production. In addition, the removal of carbon dioxide actively regulates the acid-base level, which is essential for the physiological function of the body. Due to its close connection with many other body functions, respiration can also be used as an indicator for a wide spectrum of medical conditions, which at first glance have little to do with breathing. Neurological, cardiological, inflammatory, metabolic, and even psychological conditions symptomatically show up in breathing patterns. Hence, being able to classify them automatically and unobtrusively, can allow cost-effective monitoring systems to continuously assess the health of a patient. In this work, multiple respiratory signal-extraction algorithms for thermal and RGB cameras are presented and compared. A novel algorithm for the extraction of multiple respiratory features is presented and evaluated. Using a one vs. one multiclass support vector machine, these features were used to classify a wide range of respiratory patterns with an accuracy of up to 95.79%.
Continual Monitoring of Respiratory Disorders to Enhance Therapy via Real-Time Lung Sound Imaging in Telemedicine

Murdifi Muhammad,Minghui Li,Yaolong Lou,Chang-Sheng Lee

DOI: https://doi.org/10.3390/electronics13091669

IF: 2.9

2024-04-27

Electronics

Abstract:This work presents a configurable Internet of Things architecture for acoustical sensing and analysis for frequent remote respiratory assessments. The proposed system creates a foundation for enabling real-time therapy and patient feedback adjustment in a telemedicine setting. By allowing continuous remote respiratory monitoring, the system has the potential to give clinicians access to assessments from which they could make decisions about modifying therapy in real-time and communicate changes directly to patients. The system comprises a wearable wireless microphone array interfaced with a programmable microcontroller with embedded signal conditioning. Experiments on the phantom model were conducted to demonstrate the feasibility of reconstructing acoustic lung images for detecting obstructions in the airway and provided controlled validation of noise resilience and imaging capabilities. An optimized denoising technique and design innovations provided 7 dB more SNR and 7% more imaging accuracy for the proposed system, benchmarked against digital stethoscopes. While further clinical studies are warranted, initial results suggest potential benefits over single-point digital stethoscopes for internet-enabled remote lung monitoring needing noise immunity and regional specificity. The flexible architecture aims to bridge critical technical gaps in frequent and connected respiratory function at home or in busy clinical settings challenged by ambient noise interference.

engineering, electrical & electronic,computer science, information systems,physics, applied
An Intelligent Bed Sensor System for Non-Contact Respiratory Rate Monitoring

Qingju Liu,Mark Kenny,Ramin Nilforooshan,Payam Barnaghi

DOI: https://doi.org/10.48550/arXiv.2103.13792

2021-03-25

Abstract:We present an IoT-based intelligent bed sensor system that collects and analyses respiration-associated signals for unobtrusive monitoring in the home, hospitals and care units. A contactless device is used, which contains four load sensors mounted under the bed and one data processing unit (data logger). Various machine learning methods are applied to the data streamed from the data logger to detect the Respiratory Rate (RR). We have implemented Support Vector Machine (SVM) and also Neural Network (NN)-based pattern recognition methods, which are combined with either peak detection or Hilbert transform for robust RR calculation. Experimental results show that our methods could effectively extract RR using the data collected by contactless bed sensors. The proposed methods are robust to outliers and noise, which are caused by body movements. The monitoring system provides a flexible and scalable way for continuous and remote monitoring of sleep, movement and weight using the embedded sensors.

Signal Processing
Remote Respiratory Variables Tracking With Biomedical Radar-Based IoT System During Sleep

Shuqin Dong,Li Wen,Yuchen Li,Jingyun Lu,Zhi Zhang,Chengmei Yuan,Changzhan Gu

DOI: https://doi.org/10.1109/jiot.2024.3367932

IF: 10.6

2024-01-01

IEEE Internet of Things Journal

Abstract:Nocturnal respiratory function assessment is essential for inpatients’ daily healthcare. However, the nasal cannula commonly used in hospitals can affect the patient’s breathing pattern and cause discomfort to the patient. Radar-based contactless detection technique provides a non-contact monitoring way to overcome such limitation. However, to be an alternative to airflow, the radar system requires highly accurate respiratory waveform detection. In this paper, a custom-designed biomedical radar-based internet of things (IoT) system integrated with automatic respiratory variables identification algorithm is developed to provide accurate long-term measurement of respiratory phases and amplitude during sleep. The overnight experimental data from biomedical radar and polysomnography was simultaneously recorded for 10 adults, a total duration of approximately 3851 minutes. Data from adults with suspected sleep apnea were also included. Considering the instability of respiratory activity during REM sleep, we compared the performance of the system’s measurements during REM and non-REM sleep. The results demonstrate the continuous measurement can provide the long-term respiratory variables for sleep analysis. The total experimental measurement reveals a remarkable 97%, 93% and 92% accuracy in respiration-to-respiration interval (RRI), inhale duration (ID) and exhale duration (ED), respectively, which provides accurate and convenient monitoring method and might be a part of medical IoT in the future.

computer science, information systems,telecommunications,engineering, electrical & electronic

The effectiveness of a stress coping program based on mindfulness meditation on the stress, anxiety, and depression experienced by nursing students in Korea.

A Wearable Health Monitoring System with Multi-Parameters

Bluetooth-Based Wearable Human Respiratory Parameter Monitoring System Design

A Wearable Multimodal Wireless Sensing System for Respiratory Monitoring and Analysis

Reliable Breathing Tracking With Wearable Mask Device

Integrated wearable smart sensor system for real-time multi-parameter respiration health monitoring

Quantitative and Real‐Time Evaluation of Human Respiration Signals with a Shape‐Conformal Wireless Sensing System

Design and Implementation of an IoT-based Respiratory Motion Sensor

Research and Development of an IoT-Based Remote Asthma Patient Monitoring System

Design of a wearable respiration monitoring system based on pressure sensor

In-Home, Smart Sleep Monitoring System for Cardiorespiratory Estimation and Sleep Apnea Detection: Proof of Concept

Advances in Respiratory Monitoring: A Comprehensive Review of Wearable and Remote Technologies

A Wearable Medical Sensor for Provisional Healthcare

Contactless Respiration Monitoring Using Ultrasound Signal With Off-The-Shelf Audio Devices

Development and Validation of a Portable EIT System for Real-Time Respiratory Monitoring

UbiBreathe: A Ubiquitous non-Invasive WiFi-based Breathing Estimator

A New Smartphone-Based Method for Remote Health Monitoring: Assessment of Respiratory Kinematics

Breathing Pattern Monitoring using Remote Sensors

Continual Monitoring of Respiratory Disorders to Enhance Therapy via Real-Time Lung Sound Imaging in Telemedicine

An Intelligent Bed Sensor System for Non-Contact Respiratory Rate Monitoring

Remote Respiratory Variables Tracking With Biomedical Radar-Based IoT System During Sleep