Abstract:<p>Prior studies have revealed that capsizing and sinking of bulk carriers with highly-viscous liquefied cargoes is primarily caused by a collapse of viscous shear forces as the inertial forces of the liquefied cargoes are greater than the viscous shear forces during rolling induced by oblique waves, specifically, as vessels sailing along the north-south oriented coasts (experiencing NE or NW winds) in wintertime. Post investigations show that this occurs only when a cargo shift takes place in all cargo holds for a typical nickel ore bulk carrier with five cargo holds. Nevertheless, the studies on partial cargo shifts remain poorly understood. Although the partial cargo shifts are not likely to lead to a catastrophic consequence, it can result in a dangerous list of a few degrees for bulk carriers. Many marine accidents with the partial cargo shifts have been reported over the past decade. The instantaneous impact loads, including the horizontal sectional loads and torsional moments, previously ignored by many marine engineers, but subsequently identified by us, are actually enormous, usually resulting in not only a list of ships but also obvious or potential damage to ship's structures and deck fittings. Traditional methods are difficult to predict and calculate these exceptional loads. Here we address the horizontal sectional loads and torsional moments in oblique waves at a variety of cargo shift situations using improved Arbitrary Lagrange Euler method and Finite Volume method. The results obtained from the numerical methods are well in agreement with those acquired from the model tests, implying that the numerical simulations are more suitable for capturing and tracking the complex surface of fluid sloshing with high viscosity.</p>

Review and prospects on research methods of strength failure for shipped bulk granular cargoes

Three elements of liquefaction risk of liquefiable solid bulk cargoes during sea transport: Critical review

Quantitative analysis of liquefaction risk of liquefiable solid bulk cargoes during sea transport

Analysis of Wind Load Effect on Ship Loader in Shipping Process

Safety and stability analysis of the ship loader during shipping

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Analysis of the Ship Loader's Vibration Mode in the Roll-On Process and the Reinforcement Scheme

Rolling table centrifuge modelling of partially saturated granular material to inform on instability during solid bulk cargo transport

Seismic behavior of steel silos considering granular material-structure interaction: research advances and natural vibration property analysis

Experimental and numerical investigation on the load stability of coal cargoes during marine transport

Research on Quantitative Risk Assessment Method of Packaged Cargoes Carried By Ship Based on Online Dynamic Big Data Fusion Technology

Partial cargo shift-induced instantaneous impact loads to ships with highly-viscous liquefied cargoes

Statistical Analysis of Principal Dimensions of Dry Bulk Carriers Navigating on Yangtze River Based on Big Data

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Review of Damage Mechanics

A review on risk assessment methods for maritime transport

Experimental investigation of nonlinear springing and fatigue assessment of a 308,000 DWT oil tanker and a 205,000 DWT bulk carrier in a basin

Experimental and Numerical Analysis of Supporting Forces and Lashing Forces in a Ship Cargo Securing Scheme

Bulk Cargo Multimodal Transportation on Inland Waterways Considering Transport Wastage

Monolithic 3D numerical modeling of granular cargo movement on bulk carriers in waves

A quantitative study of the effects of physical properties and external loads on the liquefaction of saturated sand based on an intelligent numerical cyclic triaxial test system