Investigation of Spray Characteristics for Detonability: A Study on Liquid Fuel Injector and Nozzle Design

Myeung Hwan Choi,Yoojin Oh,Sungwoo Park
DOI: https://doi.org/10.3390/aerospace11060421
IF: 2.66
2024-05-24
Aerospace
Abstract:Detonation engines are gaining prominence as next-generation propulsion systems that can significantly enhance the efficiency of existing engines. This study focuses on developing an injector utilizing liquid fuel and a gas oxidizer for application in detonation engines. In order to better understand the spray characteristics suitable for the pulse detonation engine (PDE) system, an injector was fabricated by varying the Venturi nozzle exit diameter ratio and the geometric features of the fuel injection hole. Analysis of high-speed camera images revealed that the Venturi nozzle exit diameter ratio plays a crucial role in determining the characteristics of air-assist or air-blast atomization. Under the conditions of an exit diameter ratio of Re/Ri = 1.0, the formation of a liquid film at the exit was observed, and it was identified that the film's length is influenced by the geometric characteristics of the fuel injection hole. The effect of the fuel injection hole and Venturi nozzle exit diameter ratio on SMD was analyzed by using droplet diameter measurement. The derived empirical correlation indicates that the atomization mechanism varies depending on the Venturi nozzle exit diameter ratio, and it also affects the distribution of SMD. The characteristics of the proposed injector, its influence on SMD, and its velocity, provide essential groundwork and data for the design of detonation engines employing liquid fuel.
engineering, aerospace
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to design a liquid fuel injector suitable for the Pulse Detonation Engine (PDE) system and study the influence of its spray characteristics on the detonation performance. Specifically, the article focuses on the following points: 1. **Improve the atomization efficiency of liquid fuel**: In order to make the liquid fuel fully mix with the oxidant and react rapidly in a short time, the liquid fuel must be broken into the smallest possible droplets. This involves optimizing the design parameters of the injector, such as the geometry of the injection holes and the Venturi nozzle exit diameter ratio. 2. **Ensure a stable detonation process**: The combustion process of liquid fuel in a pulse detonation engine is complex and easily affected by spray characteristics. Therefore, it is necessary to study the spray patterns, droplet diameter distributions and other characteristics under different injector designs to ensure the stability and high efficiency of the detonation process. 3. **Explore the influence of injector design on SMD**: The Sauter Mean Diameter (SMD) is an important indicator for measuring droplet size, which directly affects the combustion efficiency and reaction time. The paper measures the SMD of sprays under different design conditions through experiments and analyzes its variation rules. ### Key design parameters - **Venturi nozzle exit diameter ratio \( \frac{R_e}{R_i} \)**: Research shows that this ratio significantly affects the air - assisted or air - blast atomization characteristics. For example, in the case of \( \frac{R_e}{R_i} = 1.0 \), a liquid film will be formed at the nozzle exit, and the length of the film is affected by the geometric characteristics of the fuel injection holes. - **Fuel injection hole geometry**: Different injection hole positions and angles will affect the spray pattern and droplet size distribution. In the experiment, four different types of fuel columns (A, B, C, D) were used, each type having a different injection hole layout and angle. ### Experimental methods - **High - speed camera**: Used to capture spray images and analyze spray patterns and droplet behaviors. - **Laser diffraction system**: Used to measure the average droplet size and calculate SMD. - **Flow control and measurement devices**: Including mass flow controllers and Coriolis flowmeters, to ensure the precise control of experimental conditions. Through these studies, the paper provides important basic data and technical support for the design of injectors for pulse detonation engines suitable for liquid fuels.