Abstract:Fluidization of gas-solid system is long-standing subject of basic research. As a result of fluid-particle intensive contact, an isothermal system with superior heat and mass transfer abilities favors its use for chemical reactions, mixing, drying, and other applications. Inspire of huge benefits, number of problems are still associated with gas-solid fluidization system. Solid properties, in particular, particle size and size distribution significantly affect the interaction/contacting between particles, their movement and the fluid-particle mixing. Distinct macroscopic phenomena of plug formation, channeling and particle agglomeration was observed with increasing superficial gas velocity in conventional fluidized bed of fine/nano-particles (group C in the Geldart classification) due to strong interparticle forces. The concept of powder–particle fluidized bed (PPFB) was first introduced by Kato et al. in early 1990s [1]. It is known to be a useful technique to fluidize group C particles without external aid like acoustic, centrifugal, magnetic, stirring and/or vibrating fields, etc. In the PPFB process, fine powders (group C) are fluidized with coarse particles (group B). The bimodal fluidized bed system at steady state gives a certain stable hold-up of fine powders in the bed [2]. Many investigators, Sun and Grace [3], and Xue et al. [4] studied bi-modal fluidization in bubbling or turbulent regimes, while, Wei et al. [5] and Du [6, 7] concentrate on CFBs. The investigation of Xue et al. showed that by adding coarse particles fluidization quality of fine particles could improve [4]. Extensive studies of Wei et al. indicated that the addition of coarse particles to a fluid catalytic cracking (FCC) riser decreased the lateral solids mixing and had insignificant influence on axial solids mixing [5]. Du et al. studied the axial and lateral mixing by using tracer particles of different sizes in a FCC riser and found that the axial solids back mixing increased, while radial solids mixing decreased with the increase of particle size and density. Recently, Zeeshan et al. explained bi-modal/bi-particle fluidized bed system hydrodynamics, attrition, mixing behaviour, and its applications [8]. Stable and uniform heat transfer in Fluidized Bed Reactors (FBR) without providing provisions of external or internal source is a difficult task for designers. As continuous heat supply and deduction is a necessary part of FBR operation for controlling highly endothermic and exothermic reactions, respectively. The state-of-the-art idea of bi-modal particle (Gas-Solid-Solid) fluidization is given by FLOTU, in order to overcome above said reaction barriers in a fluidized bed technology. In this chapter, a comprehensive overview of

ISSN 2249-9695 Original Article Fluidized Bed Biofilm Reactor - A Novel Wastewater Treatment Reactor

Flow Distribution in a Novel Fixed Bed Bionic Reactor

Investigation of flow dynamic characteristics of inverse fluidized bed biofilm reactor for degrading pharmaceutical based biomedical wastewater

Optimization of Wastewater Treatment in a Sequential Fluidized Bed Bioreactor

Applications of fluidized bed reactors in wastewater treatment – A review of the major design and operational parameters

Improvement of Inner Components in Biological Fluidized Bed Reactors for Wastewater Treatment

Moving and Fixed Biological Biofilm Systems in Wastewater Treatmentwhen dose an Application Makes Sense

Biofilm-based technology for industrial wastewater treatment: current technology, applications and future perspectives

Recent advances in application of moving bed biofilm reactor for wastewater treatment: Insights into critical operational parameters, modifications, field-scale performance, and sustainable aspects

Review of Upflow Anaerobic Sludge Blanket Reactor Technology: Effect of Different Parameters and Developments for Domestic Wastewater Treatment

Moving bed biofilm reactor technology: process applications, design, and performance

Advancements of the Fluidized Bed Fenton (FBF) Technology for wastewater treatment: Mechanism, mass and heat transfer

Simultaneous carbon and nitrogen removal in anoxic-aerobic circulating fluidized bed biological reactor (CFBBR)

High-strength wastewater treatment using microbial biofilm reactor: a critical review

Integrated Approach For Heat Transfer In Fluidized Bed Reactors

Modeling and analysis of particle behavior in fluidized bed bioreactors during non-Newtonian sewage treatment

Technical, hygiene, economic, and life cycle assessment of full-scale moving bed biofilm reactors for wastewater treatment in India

Performance of an Internal Circulating Three-Phase Fluidized Bed Bioreactor in Treating Petrochemical Wastewater

ADVANCED TREATMENT OF SIMULATED SWINE WASTEWATER BY A MOVING BED BIOFILM REACTOR

Microbial Fluidized Bed Reactor Removing Pharmaceutical Contaminants from Wastewater – Review

NOVEL CIRCULATING FLUIDIZED BED BIOREACTOR FOR NITROGEN REMOVAL UNDER DIFFERENT NITRIFIED LIQUID RECIRCULATION RATES