Abstract:Purpose The purpose of this article is to prepare graphene/polyimide composite materials for use as bearing cage materials, improving the friction and wear performance of bearing cages. Design/methodology/approach The oil absorption and discharge tests were conducted to evaluate the oil content properties of the materials, while the mechanical properties were analyzed through cross-sectional morphology examination. Investigation into the tribological behavior and wear mechanisms encompassed characterization and analysis of wear trace morphology in PPI-based materials. Consequently, the influence of varied graphene nanoplatelets (GN) concentrations on the oil content, mechanical and tribological properties of PPI-based materials was elucidated. Findings The composites exhibit excellent oil-containing properties due to the increased porosity of PPI-GN composites. The robust formation of covalent bonds between GN and PPI amplifies the adhesive potency of the PPI-GN composites, thereby inducing a substantial enhancement in impact strength. Notably, the PPI-GN composites showed enhanced lubrication properties compared to PPI, which was particularly evident at a GN content of 0.5 Wt.%, as evidenced by the minimization of the average coefficient of friction and the width of the abrasion marks. Practical implications This paper includes implications for elucidating the wear mechanism of the polyimide composites under frictional wear conditions and then to guide the optimization of oil content and tribological properties of polyimide bearing cage materials. Originality/value In this paper, homogeneously dispersed PPI-GN composites were effectively synthesized by introducing GN into a polyimide matrix through in situ polymerization, and the lubrication mechanism of the PPI composites was compared with that of the PPI-GN composites to illustrate the composites' superiority. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0415

Effects of graphene oxide solvent‐free nanofluids on the tribological properties of polyimide coating

Tribological properties of polyimide coatings filled with graphene oxide and MXene composite nanofillers

Tribological behaviors of polyimide composite coatings containing carbon nanotubes and fluorinated graphene with hybrid phase or blend phase

Preparation and tribological behaviors of poly (ether ether ketone) nanocomposite films containing graphene oxide nanosheets

Preparation and utility of a self-lubricating & anti-wear graphene oxide/nano-polytetrafluoroethylene hybrid

Preparation and tribological properties of porous polyimide modified by graphene

Silane-grafted graphene oxide improves wear and corrosion resistance of polyimide matrix: molecular dynamics simulation and experimental analysis

Preparation and tribological properties of graphene oxide/nano-MoS2 hybrid as multidimensional assembly used in the polyimide nanocomposites

Nano-Diamond Decorated Reduced Graphene Oxide: Improvement to Tribological Property of Polyimide and Its Molecular Dynamic Simulation

Tribological properties of graphene oxide and polyethylene glycol composites under dry friction and oil lubrication conditions

Synergism Lubrication of Graphene and Carbon Nanotube in Polymeric Composites under Drying Sliding Condition

Modified Graphene/Polyimide Nanocomposites: Reinforcing And Tribological Effects

Enhanced tribological properties of polyimide composite with carbon fiber/graphitic‐carbon nitride nanosheets

Layer-by-Layer Assembled Graphene Oxide on Carbon Fiber toward Phosphate Bonded Coatings with Excellent Interfacial Bond and Tribological Performance

Effect of nano-Cu-loaded graphene fillers on tribological properties of PTFE based composite coatings

Preparation, Characterization and Tribological Performance of Polyurethane (PU) Coatings Filled with Graphene Oxide (GO)

Tribological Properties of Carbonized Polydopamine/rgo Composite Coatings

'Ball-on-plane' ZnS@RGO compound filler: effect on tribological properties of thermosetting polyimide film

Effects of graphene oxide and graphene spatial orientation on tribological properties of UHMWPE composites

Tribological properties of graphene-modified with ionic liquids and carbon quantum dots/ bismaleimide composites

Tribological properties of graphene oxide reinforced aramid paper-based composites