Engineering human senses - biosensors

C. Druzgalski

DOI: https://doi.org/10.1109/ICEEE.2007.4345071

2007-10-15

Abstract:

What problem does this paper attempt to address?

A Hybrid Algorithm of Lattice Boltzmann Method and Finite Difference-Based Lattice Boltzmann Method for Viscous Flows

Xing Shi,Xianwen Huang,Yao Zheng,Tingwei Ji

DOI: https://doi.org/10.1002/fld.4402

IF: 1.847

2017-01-01

International Journal for Numerical Methods in Fluids

Abstract:In this paper, a hybrid algorithm of the lattice Boltzmann method (LBM) and the finite difference LBM (FDLBM) is proposed. The conventional LBM is known for its high computational efficiency, whereas the finite difference method can guarantee both the accuracy of the description of the complex geometry and the high resolution of the flow field by a local refined anisotropic body-fitted mesh. The hybrid algorithm of the LBM and FDLBM takes advantage of the merits of both the methods. Four benchmark flow problems are simulated to verify the hybrid algorithm, namely, the lid-driven cavity flow, the flow past a static circular cylinder, the flow past an impulsively started cylinder, and the flow past 2 cylinders in tandem configuration. Results from these simulations show that the hybrid method proposed in the present work works very well for viscous flows.
Implementation of a high-order compact finite-difference lattice Boltzmann method in generalized curvilinear coordinates

Kazem Hejranfar,Eslam Ezzatneshan

DOI: https://doi.org/10.1016/j.jcp.2014.02.030

IF: 4.645

2014-06-01

Journal of Computational Physics

Abstract:In this work, the implementation of a high-order compact finite-difference lattice Boltzmann method (CFDLBM) is performed in the generalized curvilinear coordinates to improve the computational efficiency of the solution algorithm to handle curved geometries with non-uniform grids. The incompressible form of the discrete Boltzmann equation with the Bhatnagar–Gross–Krook (BGK) approximation with the pressure as the independent dynamic variable is transformed into the generalized curvilinear coordinates. Herein, the spatial derivatives in the resulting lattice Boltzmann (LB) equation in the computational plane are discretized by using the fourth-order compact finite-difference scheme and the temporal term is discretized with the fourth-order Runge–Kutta scheme to provide an accurate and efficient incompressible flow solver. A high-order spectral-type low-pass compact filter is used to regularize the numerical solution and remove spurious waves generated by boundary conditions, flow non-linearities and grid non-uniformity. All boundary conditions are implemented based on the solution of governing equations in the generalized curvilinear coordinates. The accuracy and efficiency of the solution methodology presented are demonstrated by computing different benchmark steady and unsteady incompressible flow problems. A sensitivity study is also conducted to evaluate the effects of grid size and filtering on the accuracy and convergence rate of the solution. Four test cases considered herein for validating the present computations and demonstrating the accuracy and robustness of the solution algorithm are: unsteady Couette flow and steady flow in a 2-D cavity with non-uniform grid and steady and unsteady flows over a circular cylinder and the NACA0012 hydrofoil at different flow conditions. Results obtained for the above test cases are in good agreement with the existing numerical and experimental results. The study shows the present solution methodology based on the implementation of the high-order compact finite-difference Lattice Boltzmann method (CFDLBM) in the generalized curvilinear coordinates is robust, efficient and accurate for solving steady and unsteady incompressible flows over practical geometries.

physics, mathematical,computer science, interdisciplinary applications
A Simplified Lattice Boltzmann Method without Evolution of Distribution Function

Z. Chen,C. Shu,Y. Wang,L. M. Yang,D. Tan

DOI: https://doi.org/10.4208/aamm.oa-2016-0029

2016-10-11

Advances in Applied Mathematics and Mechanics

Abstract:Abstract In this paper, a simplified lattice Boltzmann method (SLBM) without evolution of the distribution function is developed for simulating incompressible viscous flows. This method is developed from the application of fractional step technique to the macroscopic Navier-Stokes (N-S) equations recovered from lattice Boltzmann equation by using Chapman-Enskog expansion analysis. In SLBM, the equilibrium distribution function is calculated from the macroscopic variables, while the non-equilibrium distribution function is simply evaluated from the difference of two equilibrium distribution functions. Therefore, SLBM tracks the evolution of the macroscopic variables rather than the distribution function. As a result, lower virtual memories are required and physical boundary conditions could be directly implemented. Through numerical test at high Reynolds number, the method shows very nice performance in numerical stability. An accuracy test for the 2D Taylor-Green flow shows that SLBM has the second-order of accuracy in space. More benchmark tests, including the Couette flow, the Poiseuille flow as well as the 2D lid-driven cavity flow, are conducted to further validate the present method; and the simulation results are in good agreement with available data in literatures.

mechanics,mathematics, applied
Computation of three-dimensional incompressible flows using high-order weighted essentially non-oscillatory finite-difference lattice Boltzmann method

Kazem Hejranfar,Mohammad Abotalebi

DOI: https://doi.org/10.1063/5.0212459

IF: 4.6

2024-07-01

Physics of Fluids

Abstract:In the present work, an accurate and robust solution methodology based on the high-order weighted essentially non-oscillatory (WENO) finite-difference lattice Boltzmann method (LBM) in the three-dimensional generalized curvilinear coordinates is presented and applied for simulating the three-dimensional incompressible flows over complicated configurations with curved boundaries. Here, the incompressible form of the lattice Boltzmann equation in three dimensions is considered and the discretization of the spatial derivative terms is performed with the fifth-order WENO finite-difference method and the temporal derivative term is discretized with the fourth-order Runge–Kutta scheme to ensure the accuracy and stability of the solution method for both the steady and unsteady problems. The three-dimensional lattice Boltzmann equation applied here is based on a nineteen discrete velocity model for transforming the microscopic properties to the macroscopic ones. To assess the accuracy and robustness of the present three-dimensional high-order finite-difference LBM solver, different incompressible flow benchmarks and practical test cases are studied that are the cavity flow, the Beltrami flow, the flow in the curved ducts of rectangular cross sections, and the flow over a sphere for different flow conditions. The decay of the homogeneous isotropic turbulence is also computed to examine the suitability of the present solution method to be applied as the direct numerical simulation of turbulent flows. It is demonstrated that the solution methodology presented based on the high-order WENO finite-difference LBM in the three-dimensional generalized curvilinear coordinate can be used for accurately and effectively computing the three-dimensional practical incompressible flow problems.

mechanics,physics, fluids & plasmas
A high order least square-based finite difference-finite volume method with lattice Boltzmann flux solver for simulation of incompressible flows on unstructured grids

Y.Y. Liu,C. Shu,H.W. Zhang,L.M. Yang

DOI: https://doi.org/10.1016/j.jcp.2019.109019

IF: 4.645

2020-01-01

Journal of Computational Physics

Abstract:This paper presents a high order least square-based finite difference-finite volume (LSFD-FV) method together with lattice Boltzmann flux solver for accurate simulation of incompressible flows on unstructured grids. Within each control cell, a high order polynomial, which is based on Taylor series expansion, is applied to approximate the solution function. The derivatives in the Taylor series expansion are approximated by the functional values at the centers of neighboring cells using the mesh-free least square-based finite difference (LSFD) method developed by Ding et al. (2004) [36]. In the high order finite volume method, the recently developed lattice Boltzmann flux solver (LBFS) is applied to evaluate the inviscid and viscous fluxes physically and simultaneously at the cell interface by local reconstruction of lattice Boltzmann solution. Compared with traditional k-exact high-order finite volume method, the present method is more accurate and efficient. Various benchmark examples are tested to validate the high-order accuracy, high computational efficiency and flexibility of the proposed method on unstructured grids.

physics, mathematical,computer science, interdisciplinary applications
Numerical simulation of compressible flows by lattice Boltzmann method

Mostafa Safdari Shadloo

DOI: https://doi.org/10.1080/10407782.2019.1580053

2019-02-01

Abstract:In this article, we propose a numerical framework based on multiple relaxation time lattice Boltzmann (LB) model and novel discretization techniques for simulating compressible flows. Highly efficient finite difference lattice Boltzmann methods are employed to simulate one- and two-dimensional compressible flows. These numerical techniques are applied on the single- and multiple-relaxation-time on the 16-discrete-velocity (Kataoka and Tsutahara, Phys. Rev. E, 69(5):056702, 2004) compressible lattice Boltzmann model. The Boltzmann equation is discretized via modified Lax-Wendroff and modified total variation diminishing schemes which have ability to damps oscillations at discontinuities, effectively. The results of compressible models are compared and validated with the well-known inviscid compressible flow benchmark test cases, so called Riemann problems. The proposed method shows its superiority over available techniques when compared to the analytical solutions. It is then used to solve two-dimensional inviscid compressible flow benchmarks, including regular shock reflection and Richtmyer–Meshkov instability problems to ensure its applicability for more complex problems. It is found that, the applied discretization techniques improve the stability of original LB models and enhance the robustness of compressible flow problems by preventing the formation of oscillation.
Multiphase Lattice Boltzmann Flux Solver for Incompressible Multiphase Flows with Large Density Ratio

Y. Wang,C. Shu,H. B. Huang,C. J. Teo

DOI: https://doi.org/10.1016/j.jcp.2014.09.035

IF: 4.645

2014-01-01

Journal of Computational Physics

Abstract:An improved multiphase lattice Boltzmann flux solver (MLBFS) is proposed in this work for effective simulation of three-dimensional (3D) multiphase flows with large density ratio and high Reynolds number. As a finite volume scheme, the MLBFS originally proposed in [27] applies the finite volume method to solve for macroscopic flow variables directly. The fluxes are reconstructed locally at each cell interface by using the standard LBM solutions. Due to the modeling error of the standard LBM, the reconstructed fluxes deviate from those in the Navier–Stokes equations; and to compensate this error, a complex tensor is introduced in the original MLBFS. However, the computation of the tensor introduces additional complexity and usually needs a relatively thicker interface thickness to maintain numerical stability, which makes the solver be complex and inefficient in the 3D case. To remove this drawback, in this work, a theoretical analysis to the formulations obtained from the Chapman–Enskog expansion is conducted. It is shown that the modeling error can be effectively removed by modifying the computation of the equilibrium density distribution function. With this improvement, the proposed 3D MLBFS not only avoids the calculation of the compensation tensor but also is able to maintain numerical stability with very thin interface thickness. Several benchmark cases, including the challenging droplet impacting on a dry surface, head-on collisions of binary droplets and droplet splashing on a thin film with density ratio 1000 and Reynolds number up to 3000, are studied to validate the proposed solver. The obtained results agree well with the published data.
An implicit lattice Boltzmann flux solver for simulation of compressible flows

Xiang Zhao,Liming Yang,Chang Shu

DOI: https://doi.org/10.1016/j.camwa.2021.12.014

2022-02-01

Abstract:The lattice Boltzmann flux solver (LBFS) is a novel Boltzmann-typed solver under the finite volume framework, which has many advantages over traditional lattice Boltzmann equation (LBE) solvers. However, the existing versions of LBFS are explicit in temporal discretization. Therefore, they are of low computational efficiency and are mostly applied to the simulation of flows around simple geometries. In this paper, an implicit lattice Boltzmann flux solver for compressible flows is proposed, which can efficiently march in time with a large CFL number, and therefore facilitates the simulation of flows around complex geometries in practical engineering applications. Aiming to obtain the time-accurate results of unsteady flows, the implicit LBFS is further combined with the dual time-stepping technique to efficiently simulate unsteady flows, in which a sub-iteration is applied on the pseudo time level. In the sub-iteration, the Jacobian matrix is preconditioned by the lower-upper symmetric Gauss-Seidel (LUSGS) method and solved by the generalized minimal residual method (GMRES). The accuracy and efficiency of the proposed solver are demonstrated by various simulations in a wide Mach number regime. To further demonstrate its performance in practical engineering applications, the proposed solver is also used to simulate the flow over complex aircraft models.

mathematics, applied
Lattice Boltzmann Simulation Of Flow Past An Elliptic Cylinder

Weiping Shi,Y. Q. Zu,Haicheng Zheng,Ming J. Cheng

2006-01-01

Abstract:Lattice Boltzmann Method (LBM) is reliable, accurate, easy to implement and parallelize. In this paper, it is employed to simulate incompressible viscous flow past an elliptic cylinder. Several different angles of attrack are chosen to examine the variations of them on the flows. In addition, several flow features are imported to analyze the evolution of the flow fields. Some similarities and differences are found among the flows with different angles of attack. The results of the simulation agree with those of available literatures, and show that LBM can achieve accurate results and obtain the reasonable flow in detail.
Cascaded lattice Boltzmann modeling and simulations of three-dimensional non-Newtonian fluid flows

Saad Adam,Farzaneh Hajabdollahi,Kannan N. Premnath

DOI: https://doi.org/10.1016/j.cpc.2021.107858

IF: 4.717

2021-05-01

Computer Physics Communications

Abstract:Non-Newtonian fluid flows, especially in three dimensions (3D), arise in numerous settings of interest to physics. Prior studies using the lattice Boltzmann method (LBM) of such flows have so far been limited to mainly to two dimensions and used less robust collision models. In this paper, we develop a new 3D cascaded LBM based on central moments and multiple relaxation times (MRT) on a three-dimensional, nineteen velocity (D3Q19) lattice for simulation of generalized Newtonian (power law) fluid flows. The relaxation times of the second order moments are varied locally based on the local shear rate and parameterized by the consistency coefficient and the power law index of the nonlinear constitutive relation of the power law fluid. Numerical validation study of the 3D cascaded LBM for various benchmark problems, including the complex 3D non-Newtonian flow in a cubic cavity at different Reynolds numbers and power law index magnitudes encompassing shear thinning and shear thickening fluids, are presented. Furthermore, in order to demonstrate the advantages of the proposed 3D cascaded LBM based on central moments, numerical stability comparisons against the LBMs based on a single relaxation time model and a MRT model using raw moments are made. Numerical results demonstrate the accuracy, second order grid convergence and significant improvements in numerical stability of the 3D cascaded LBM for simulation of 3D non-Newtonian flows of power law fluids.

physics, mathematical,computer science, interdisciplinary applications
A novel high-order solver for simulation of incompressible flows using the flux reconstruction method and lattice Boltzmann flux solver

Chao Ma,Jie Wu,Liming Yang

DOI: https://doi.org/10.1016/j.compfluid.2022.105673

2022-11-15

Abstract:In this paper, a novel high-order solver using the flux reconstruction (FR) method and the lattice Boltzmann flux solver (LBFS) is proposed for accurately and efficiently simulating nearly incompressible flows. The existing LBFSs are all based on the finite volume (FV) scheme. The present work extends the application of the LBFS for the first time by combining the high-order FR scheme. Compared with the traditional high-order incompressible Navier-stokes (N-S) solvers, no particular techniques are needed for the current FR-LBFS to overcome the difficulty of the pressure-velocity coupling since the present method is a weakly compressible model. Moreover, unlike the traditional N-S solvers where the inviscid and viscous terms are treated separately, the inviscid and viscous fluxes in the current scheme are coupled and computed uniformly in FR-LBFS. In the present method, the common inviscid and viscous fluxes at the cell interface of the FR scheme are evaluated simultaneously by the local reconstruction of lattice Boltzmann equation (LBE) solution from macroscopic flow variables at solution points. Thus the discretization of the second-order partial derivative term is avoided. Compared with the high-order off-lattice Boltzmann methods (OLBM), the FR-LBFS is more stable, efficient and low-storage. No special techniques are needed to remove the stiffness of the governing equations which existing in the discrete velocity Boltzmann equation (DVBE). Compared with the high-order FV-LBFS, the FR-LBFS is compact for parallel computing by avoiding wide stencils on meshes. In addition, the present scheme has lower dissipation and can be more flexible to increase accuracy order. Numerical validations of the proposed method are implemented by simulating (a) Taylor-Green vortex problem, (b) steady plane Poiseuille flow, (c) lid-driven cavity flow, (d) laminar boundary layer and (e) flow past a square cylinder.

mechanics,computer science, interdisciplinary applications
Numerical Study of Lattice Boltzmann Methods for a Convection–diffusion Equation Coupled with Navier–Stokes Equations

H-B Huang,X-Y Lu,M. C. Sukop

DOI: https://doi.org/10.1088/1751-8113/44/5/055001

2011-01-01

Abstract:Numerous lattice Boltzmann (LB) methods have been proposed for solution of the convection-diffusion equations (CDE). For the 2D problem, D2Q9, D2Q5 or D2Q4 velocity models are usually used. When LB convection-diffusion models are used to solve a CDE coupled with Navier-Stokes equations, boundary conditions are found to be critically important for accurately solving the coupled simulations. Following the idea of a regularized scheme (Latt et al 2008 Phys. Rev. E 77 056703), a regularized boundary condition for solving a CDE is proposed. A simple extrapolation scheme is also proposed for the Neumann boundary condition. Spatial accuracies of three existing and the proposed boundary conditions are discussed in details. The numerical evaluations are based on simulations of steady and unsteady natural convection flows in a cavity and an unsteady Taylor-Couette flow. Our studies show that the simplest D2Q4 model with terms of O(u) in the equilibrium distribution function is capable of obtaining results of equal accuracy as D2Q5 or D2Q9 models for the CDE. A slightly revised LB equation for solving a CDE that is used to cancel some unwanted terms does not seem to be necessary for incompressible flows. The regularized boundary condition for solving the CDE has second-order spatial accuracy and it is the best one in terms of the spatial accuracy. The regularized scheme and non-equilibrium extrapolation scheme are applicable to handle both the Dirichlet and Neumann boundary conditions. For the Neumann boundary condition with zero flux, all the five boundary conditions are applicable to give accurate results and the bounce-back scheme is the simplest one.
On development of lattice-Boltzmann method based multi phase flow solver

Tejas Raval,Dhruv Patel,Absar Lakdawala

DOI: https://doi.org/10.1080/10407790.2024.2343331

2024-04-26

Numerical Heat Transfer Part B Fundamentals

Abstract:A numerical methodology based on lattice Boltzmann and level set function is presented to simulate the two-phase flows with stringent density and viscosity ratio. Two different strategies - single grid (SGLBLS) and dual grid (DGLBLS) are used. For accurate computation of interfacial forces in DGLBLS, the level set equations are solved on a uniform grid which is twice that for lattice-Boltzmann equations. The code validation and performance of SGLBLS and DGLBLS is carried on three different problems: Young's Laplace law, 2D rising bubble and Rayleigh–Taylor instability. The results show that the representation of the interface is more accurate in DGLBLS with significantly less mass error - establishing it as an accurate method to handle stringent density and viscosity ratio. The comparison between DGLBLS and SGLBLS shows that the DGLBLS leads to a large improvement in the accuracy of the results with only slight increase in the computational cost.

thermodynamics,mechanics
Development of a coupled simplified lattice Boltzmann method for thermal flows

Yuan Gao,Yang Yu,Liuming Yang,Shenglei Qin,Guoxiang Hou

DOI: https://doi.org/10.1016/j.compfluid.2021.105042

2021-10-01

Abstract:The simplified lattice Boltzmann method (SLBM) is relatively new in the LBM community, which lowers the cost in virtual memories significantly and has better numerical stability compared with the single-relaxation-time (SRT) LBM. Recently, SLBM has been extended to simulate thermal flows based on the simplified thermal energy distribution function model. However, the existing thermal models developed for SLBM are not strict in theory. In this work, a coupled simplified lattice Boltzmann method (CSLBM) for thermal flows and its boundary treatment are proposed, where the Navier-Stokes equations for the hydrodynamic field and the convection-diffusion equation for the temperature field are solved independently by two sets of SLBM equations. The consistent forcing scheme is adopted to couple the contribution of the temperature field to the hydrodynamic field. The boundary treatment for temperature field proposed in this work offers an analytical interpretation of the no-slip boundary condition. To validate the accuracy, efficiency, and stability of the present CSLBM, several canonical test cases, including the porous plate problem, the Rayleigh-Bénard convection, and the natural convection in a square cavity are conducted. The numerical results agree well with the analytical solutions or numerical results in the literatures, which shows the present algorithm is of second-order accuracy in space and demonstrates the robustness of CSLBM in practical simulations.

mechanics,computer science, interdisciplinary applications
Cascaded Lattice Boltzmann Method based on Central Moments for Axisymmetric Thermal Flows Including Swirling Effects

Farzaneh Hajabdollahi,Kannan N. Premnath,Samuel W. J. Welch

DOI: https://doi.org/10.48550/arXiv.1806.10241

2018-06-27

Abstract:A cascaded lattice Boltzmann (LB) approach based on central moments and multiple relaxation times to simulate thermal convective flows, which are driven by buoyancy forces and/or swirling effects, in the cylindrical coordinate system with axial symmetry is presented. In this regard, the dynamics of the axial and radial momentum components along with the pressure are represented by means of the 2D Navier-Stokes equations with geometric mass and momentum source terms in the pseudo Cartesian form, while the evolutions of the azimuthal momentum and the temperature field are each modeled by an advection-diffusion type equation with appropriate local source terms. Based on these, cascaded LB schemes involving three distribution functions are formulated to solve for the fluid motion in the meridian plane using a D2Q9 lattice, and to solve for the azimuthal momentum and the temperature field each using a D2Q5 lattice. The geometric mass and momentum source terms for the flow fields and the energy source term for the temperature field are included using a new symmetric operator splitting technique, via pre-collision and post-collision source steps around the cascaded collision step for each distribution function. These result in a particularly simple and compact formulation to directly represent the effect of various geometric source terms consistently in terms of changes in the appropriate zeroth and first order moments. Simulations of several complex buoyancy-driven thermal flows and including rotational effects in cylindrical geometries using the new axisymmetric cascaded LB schemes show good agreement with prior benchmark results for the structures of the velocity and thermal fields as well as the heat transfer rates given in terms of the Nusselt numbers.

Fluid Dynamics,Statistical Mechanics,Computational Physics
High-order upwind compact finite-difference lattice Boltzmann method for viscous incompressible flows

Y.X. Sun,Z.F. Tian

DOI: https://doi.org/10.1016/j.camwa.2020.08.014

2020-10-01

Abstract:In this work, a high-order upwind compact finite-difference lattice Boltzmann method (UCDLBM) is developed to efficiently solve viscous incompressible flow problems. A fifth-order upwind compact difference scheme is adopted to discretize the spatial derivatives of the lattice Boltzmann equation, and the third-order total-variation-diminishing Runge–Kutta scheme is utilized for the discretization of the temporal term. Compared to the existing central compact finite-difference lattice Boltzmann method (CFDLBM), the present UCDLBM can prevent non-physical oscillations without filtering due to the natural dissipative property of upwind schemes. Three benchmark problems involving the Taylor–Green vortex problem, the doubly periodic shear layer flow problem and the lid driven square cavity flow problem are numerically solved to demonstrate the accuracy and efficiency of the present method. Numerical results computed are in good agreement with the analytical solution or other available numerical results. And, the present UCDLBM is less time-consuming than the CFDLBM without degenerating the order of accuracy of the numerical solutions.

mathematics, applied
Three-Dimensional Lattice Boltzmann Model for High-Speed Compressible Flows

Feng Chen,Aiguo Xu,Guangcai Zhang,Yingjun Li

DOI: https://doi.org/10.48550/arXiv.1010.4135

2010-10-20

Abstract:A highly efficient three-dimensional (3D) Lattice Boltzmann (LB) model for high speed compressible flows is proposed. This model is developed from the original one by Kataoka and Tsutahara[Phys. Rev. E 69, 056702 (2004)]. The convection term is discretized by the Non-oscillatory, containing No free parameters and Dissipative (NND) scheme, which effectively damps oscillations at discontinuities. To be more consistent with the kinetic theory of viscosity and to further improve the numerical stability, an additional dissipation term is introduced. Model parameters are chosen in such a way that the von Neumann stability criterion is satisfied. The new model is validated by well-known benchmarks, (i) Riemann problems, including the problem with Lax shock tube and a newly designed shock tube problem with high Mach number; (ii) reaction of shock wave on droplet or bubble. Good agreements are obtained between LB results and exact ones or previously reported solutions. The model is capable of simulating flows from subsonic to supersonic and capturing jumps resulted from shock waves.

Statistical Mechanics,Soft Condensed Matter,Cellular Automata and Lattice Gases,Computational Physics,Plasma Physics
A Pseudopotential Lattice Boltzmann Method for Simulation of Two-Phase Flow Transport in Porous Medium at High-Density and High–Viscosity Ratios

Eslam Ezzatneshan,Reza Goharimehr

DOI: https://doi.org/10.1155/2021/5668743

IF: 2.006

2021-08-06

Geofluids

Abstract:In this work, the capability of a multiphase lattice Boltzmann method (LBM) based on the pseudopotential Shan-Chen (S-C) model is investigated for simulation of two-phase flows through porous media at high-density and high–viscosity ratios. The accuracy and robustness of the S-C LBM are examined by the implementation of the single relaxation time (SRT) and multiple relaxation time (MRT) collision operators with integrating the forcing schemes of the shifted velocity method (SVM) and the exact difference method (EDM). Herein, two equations of state (EoS), namely, the standard Shan-Chen (SC) EoS and Carnahan-Starling (CS) EoS, are implemented to assay the performance of the numerical technique employed for simulation of two-phase flows at high-density ratios. An appropriate modification in the forcing schemes is also used to remove the thermodynamic inconsistency in the simulation of two-phase flow problems studied at low reduced temperatures. The comparative study of these improvements of the S-C LBM is performed by considering an equilibrium state of a droplet suspended in the vapor phase. The solver is validated against the analytical coexistence curve for the liquid-vapor system and the surface tension estimation from the Laplace Law. Then, according to the results obtained, a conclusion has been made to choose an efficient numerical algorithm, including an appropriate collision operator, a realistic EoS, and an accurate forcing scheme, for simulation of multiphase flow transport through a porous medium. The patterns of two-phase flow transport through the porous medium are predicted using the present numerical scheme in different flow conditions defined by the capillary number and the dynamic viscosity ratio. The results obtained for the nonwetting phase saturation, penetration structure of the invading fluid, and the displacement patterns of two-phase flow in the porous medium are comparable with those reported in the literature. The present study demonstrates that the S-C LBM with employing the MRT-EDM scheme, CS EoS, and the modified forcing scheme is efficient and accurate for estimation of the two-phase flow characteristics through the porous medium.

geochemistry & geophysics,geology
Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units

Ivan T. Martins,Pablo F. Alvariño,Luben Cabezas-Gómez

DOI: https://doi.org/10.1007/s40430-024-04905-y

IF: 2.361

2024-05-09

Journal of the Brazilian Society of Mechanical Sciences and Engineering

Abstract:In this paper, we propose a dimensional lattice Boltzmann method (LBM) that numerically solves the discrete lattice Boltzmann equation directly in physical units. This procedure facilitates the LBM application for simulating transport phenomena completely avoiding the use of lattice units and consequently of any particular unit conversion system. Several test problems related to different physical phenomena are simulated, such as heat diffusion, lid-driven cavity, forced convection in channels (both developed and under development) and two-phase liquid–gas systems, considering stationary and dynamic flows under very high density and viscosity ratios. We compare the numerical results with analytical or finite difference solutions, finding a good agreement between them. Similarly, we performed a stability analyses for three of the test cases. The traditional LBM was also considered for the sake of comparison, showing both the same accuracy and stability, as expected. Furthermore, we present solutions using the Allen–Cahn phase-field LBM model for high liquid/gas density and gas/liquid kinematic viscosity ratios, up to 43,300 and 470, respectively, commonly not found in open literature. The proposed methodology enhances the LBM use as a simulation tool for the wide transport phenomena where it finds application.

engineering, mechanical
High-order thread-safe lattice Boltzmann model for HPC turbulent flow simulations

Andrea Montessori,Michele La Rocca,Giorgio Amati,Marco Lauricella,Adriano Tiribocchi,Sauro Succi

2024-02-02

Abstract:We present a highly-optimized thread-safe lattice Boltzmann model in which the non-equilibrium part of the distribution function is locally reconstructed via recursivity of Hermite polynomials. Such a procedure allows the explicit incorporation of non-equilibrium moments of the distribution up to the order supported by the lattice. Thus, the proposed approach increases accuracy and stability at low viscosities without compromising performances and amenability to parallelization with respect to standard lattice Boltzmann models. The high-order thread-safe LB is tested on two types of turbulent flows, namely the turbulent channel flow at $Re_{\tau}=180$ and the axisymmetric turbulent jet at $Re = 7000$, it delivers results in excellent agreement with reference data (both DNS, theory, and experiments) and a) achieves peak performances ($\sim 5 \; TeraFlop/s$ and an arithmetic intensity of $\sim 7\; FLOP/byte$ on single GPU) by significantly reducing the memory footprint, b) retains the algorithmic simplicity of standard lattice Boltzmann computing and c) allows to perform stable simulations at vanishingly low viscosities. Our findings open attractive prospects for high-performance simulations of realistic turbulent flows on GPU-based architectures. Such expectations are confirmed by the excellent agreement among lattice Boltzmann, experimental, and DNS reference data.

Fluid Dynamics

Engineering human senses - biosensors

A Hybrid Algorithm of Lattice Boltzmann Method and Finite Difference-Based Lattice Boltzmann Method for Viscous Flows

Implementation of a high-order compact finite-difference lattice Boltzmann method in generalized curvilinear coordinates

A Simplified Lattice Boltzmann Method without Evolution of Distribution Function

Computation of three-dimensional incompressible flows using high-order weighted essentially non-oscillatory finite-difference lattice Boltzmann method

A high order least square-based finite difference-finite volume method with lattice Boltzmann flux solver for simulation of incompressible flows on unstructured grids

Numerical simulation of compressible flows by lattice Boltzmann method

Multiphase Lattice Boltzmann Flux Solver for Incompressible Multiphase Flows with Large Density Ratio

An implicit lattice Boltzmann flux solver for simulation of compressible flows

Lattice Boltzmann Simulation Of Flow Past An Elliptic Cylinder

Cascaded lattice Boltzmann modeling and simulations of three-dimensional non-Newtonian fluid flows

A novel high-order solver for simulation of incompressible flows using the flux reconstruction method and lattice Boltzmann flux solver

Numerical Study of Lattice Boltzmann Methods for a Convection–diffusion Equation Coupled with Navier–Stokes Equations

On development of lattice-Boltzmann method based multi phase flow solver

Development of a coupled simplified lattice Boltzmann method for thermal flows

Cascaded Lattice Boltzmann Method based on Central Moments for Axisymmetric Thermal Flows Including Swirling Effects

High-order upwind compact finite-difference lattice Boltzmann method for viscous incompressible flows

Three-Dimensional Lattice Boltzmann Model for High-Speed Compressible Flows

A Pseudopotential Lattice Boltzmann Method for Simulation of Two-Phase Flow Transport in Porous Medium at High-Density and High–Viscosity Ratios

Lattice Boltzmann method for simulating transport phenomena avoiding the use of lattice units

High-order thread-safe lattice Boltzmann model for HPC turbulent flow simulations