Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

Self-powered triboelectric sensor based on a carbon fiber/glass fiber/epoxy structural composite for efficient traffic monitoring

Use of Distributed Fiber Optic Sensors for the Monitoring of an Accelerated Pavement Test

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

Triboelectric sensor array for internet of things based smart traffic monitoring and management system

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

All‐Weather Self‐Powered Intelligent Traffic Monitoring System Based on a Conjunction of Self‐Healable Piezoresistive Sensors and Triboelectric Nanogenerators

Vehicle-Mounted Pavement Health Monitoring System Based on a Spring-Guide-Assisted Triboelectric Sensor

A Vision and Proof of Concept for New Approach to Monitoring for Safer Future Smart Transportation Systems

Towards a sustainable monitoring: A self-powered smart transportation infrastructure skin

Recent progress of triboelectric nanogenerators as self-powered sensors in transportation engineering

A Capsule-Shaped Triboelectric Nanogenerator for Self-Powered Health Monitoring of Traffic Facilities

Fully self-powered instantaneous wireless traffic monitoring system based on triboelectric nanogenerator and magnetic resonance coupling

Electric field–tunable self-sensing nanocomposites with aligned CNTs for in-situ pavement health monitoring: Electrodynamic alignment, sensor development, and performance validation

The Innovative Self-Sensing Strain Sensor for Asphalt Pavement Structure: Substitutability and Synergy Effects of Graphene Platelets With Carbon Nanotubes in Epoxy Composites

Environmentally Robust Triboelectric Tire Monitoring System for Self‐Powered Driving Information Recognition via Hybrid Deep Learning in Time‐Frequency Representation

A Real-Time Sensing System Based on Triboelectric Nanogenerator for Dynamic Response of Bridges

Smart Composite Structures with Embedded Sensors for Load and Damage Monitoring – A Review

Study on intelligent monitoring system for long term performance of road engineering and new monitoring and sensing technology

Triboelectric nanogenerator for self-powered traffic monitoring

A real-time quantitative acceleration monitoring method based on triboelectric nanogenerator for bridge cable vibration

Artificial intelligence motivated flexible single-electrode mode multilayer triboelectric sensor for smart mobility systems