Abstract:The interfacial designing of carbon fiber (CF)/epoxy composites, as a well-accepted method used to obtain high-performance composites, has gained extensive attention. However, an improvement in interfacial adhesion is usually accompanied by a simultaneous decrease in toughness, which has become an obstacle to the performance enhancement of CF/epoxy composites. Herein, nanosized UiO-66-NH2 was proposed to yield on the CF surface through an in situ growth method for preparing high-performance CF/epoxy composites. The induced UiO-66-NH2 could significantly enhance the active groups, surface roughness and wettability on the fiber surface, which can be confirmed by XPS, FTIR, dynamic contact angle (DCA) and SEM. Moreover, the porous structure of UiO-66-NH2 enables the epoxy resin to pass through it, which could toughen the matrix by forming an interpenetrating network structure and reducing the density of resin crosslinking. Meanwhile, the size effect of UiO-66-NH2 could hinder the crack propagation and release the stress concentration. Benefiting from these interfacial strengthening and toughening effects, the interlaminar shear strength and impact strength increased by 44.2% and 27.6%, respectively, in comparison to those of untreated CF. This work proposes a simple and effective strategy for interfacial designing that could offer new ideas for solving the conflict between the strengthening and toughening and provide a practical basis for preparing high-performance resin matrix composites.

Grafting the buffer interphase '' MOF ‐5'' for acquiring carbon fiber reinforced composite with excellent mechanical and tribological properties

Organic–inorganic interface enhancement for boosting mechanical and tribological performances of carbon fiber reinforced composites

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Improvements of mechanical and tribological properties of carbon fiber reinforced composites via chemically grafting MA onto MnO 2 nanosheets as interphase

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Grafting of size-controlled graphene oxide sheets onto carbon fiber for reinforcement of carbon fiber/epoxy composite interfacial strength

Strengthening and Toughening Epoxy Composites by Constructing MOF/CF Multi-Scale Reinforcement

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Hybrid Metal-Organic Frameworks/Carbon Fibers Reinforcements for Additively Manufactured Composites

A novel π bridging method to graft graphene oxide onto carbon fiber for interfacial enhancement of epoxy composites

Hierarchical Interfacial Construction by Grafting Cellulose Nanocrystals onto Carbon Fiber for Improving the Mechanical Performance of Epoxy Composites

Enhancing the Interfacial Shear Strength and Tensile Strength of Carbon Fibers through Chemical Grafting of Chitosan and Carbon Nanotubes

Grafting Carbon Fibers with Graphene via a One-Pot Aryl Diazonium Reaction to Refine the Interface Performance of T1100-Grade CF/BMI Composites

Improving the Curing and Mechanical Properties of Short Carbon Fibers/Epoxy Composites by Grafting Nano ZIF‐8 on Fibers

An organic-inorganic interface structure for CFRP and the enhancement of mechanical properties at room/high temperature

Metal–organic frameworks/polydopamine synergistic interface enhancement of carbon fiber/phenolic composites for promoting mechanical and tribological performances

Polyhedral oligomeric silsesquioxanes/carbon nanotube/carbon fiber multiscale composite: Influence of a novel hierarchical reinforcement on the interfacial properties

Improving the interfacial property of CF composites through constructing multiscale interfacial nanostructures

Chemical grafting of graphene onto carbon fiber to produce composites with improved interfacial properties via sizing process: A step closer to industrial production

Constructing a Superior Interfacial Microstructure on Carbon Fiber for High Interfacial and Mechanical Properties of Epoxy Composites

Constructing "nunchaku-like" multi-stage gradient interface via covalently grafting rigid-flexible-rigid structures onto carbon fibers: An effect strategy to improve interfacial properties of composites