Abstract:In this study, commercial cellulose membranes were surface coated with alpha‑zirconium phosphate nanoparticles (α-ZrP-n) to study their impact on the overall removal efficiency of heavy metals from synthetic metal mixture wastewater solution. A total of four homogeneous solutions (0.25, 0.50, 0.75, and 1.00 wt%) of α-ZrP-n were prepared by sonicating the nanoparticles in deionized water. These solutions were used to surface coat the commercial cellulose membranes. The Scanning Electron Microscopy (SEM) along with Energy Dispersive Spectroscopy (EDS) were used to confirm the attachment of α-ZrP-n on the cellulose membrane surface. Furthermore, the structural characteristics of the α-ZrP-n modified cellulose membranes were also studied. The water contact angle results showed that all coated membranes remained super-hydrophilic. The porosity of the membranes decreased to 48% with the addition of 1.00 wt% α-ZrP-n compared to 65% for the pristine membrane. The mechanical strength has improved from 3.4 MPa for the pristine membrane to about 4 MPa for the 1.00 wt% α-ZrP-n membrane. Similarly, the thermal stability was found to be slightly enhanced as evidenced by the increase in decomposition temperature to 280 and 285 °C in the 0.75 and 1.00 wt% α-ZrP-n membranes, respectively. Furthermore, a removal efficiency of 97.0 ± 0.6, 98.0 ± 0.5, 99.5 ± 0.2, and 91.5 ± 2.0% for Cu (II), Zn (II), Ni (II), and Pb (II), respectively, was observed with the 0.50 wt% α-ZrP-n membrane. This removal was achieved at a flux of 41.85 ± 0.87 × 103 LMH. Increasing the α-ZrP-n concentration further did not show any improvement in the overall removal efficiency. However, it led to 46% flux reduction in the 1.00 wt% α-ZrP-n membrane. The mechanism of removal of the heavy metal ions was postulated to be a combination of ion exchange and electrostatic attraction of the strong negatively charged α-ZrP-n membranes and the free metal ions in the wastewater solution.

Fabrication of cellulose@Mg(OH)2 composite filter via interfacial bonding and its trapping effect for heavy metal ions

High efficiency filter: Cellulose-derived biochar fibril and magnesium oxide composite for boosting performance of heavy metal ions capture

Confinement effect of network-structured carbon dots/cellulose nanocellulose/magnesium hydroxide for enhanced heavy metal ions capture and immobilization

Developing cellulose-based hydrophobic/hydrophilic composites for efficient adsorption of oils and heavy metals from water

Robust cellulose-based composite adsorption membrane for heavy metal removal

Combinational strategy of chemical graft and layer-by-layer assembly of novel nanocomposite membranes fabrication for heavy metal ion capture

In situ growth of Zr-based metal-organic frameworks on cellulose sponges for Hg 2+ and methylene blue removal

Encapsulation of heavy metal ions via adsorption using cellulose/ZnO composite: First principles approach

All-biomass cellulose/casein adsorbent fabricated via the "green solvent system" of ionic liquid for the efficient removal of Cu(II), Cd(II) and Pb(II)

Synthesis of cellulose cotton-based UiO-66 MOFs for the removal of rhodamine B and Pb(II) metal ions from contaminated wastewater

Preparation of cellulose nanofiber/Fe3O4/CaCO3 magnetic biocomposite by air capture and its application on purifying lead-contaminated water: Removal, immobilization and separation

Stable and easily detachable cellulose-based membrane system inspired by water hyacinth for efficient heavy metals removal from water

Porous cellulose beads reconstituted from ionic liquid for adsorption of heavy metal ions from aqueous solutions

Design of amphoteric MOFs-cellulose based composite for wastewater remediation: Adsorption and catalysis

Synthesis of super hydrophilic cellulose-alpha zirconium phosphate ion exchange membrane via surface coating for the removal of heavy metals from wastewater

Thiophene functionalized cellulose immobilized with metal organic framework for removal of heavy metals

In-Depth Sulfhydryl-Modified Cellulose Fibers for Efficient and Rapid Adsorption of Cr(VI)

A Novel Cellulose-Based Composite Hydrogel Microsphere Material: for Efficient Adsorption of Co(II) and Ni(II) Ions in Water

Multifunctional bacterial cellulose-bentonite@polyethylenimine composite membranes for enhanced water treatment: Sustainable dyes and metal ions adsorption and antibacterial properties

Site-imprinted hollow composites with integrated functions for ultra-efficient capture of hexavalent chromium from water

Amine-functionalized cellulose nanofiber-sodium alginate-Fe(III) porous hollow beads for the efficient removal of Cr(VI)