Regulation of ERK/JNK/p70S6K in two rat models of liver injury and fibrosis.

G. Svegliati-Baroni,F. Ridolfi,Zaira Caradonna,D. Alvaro,M. Marzioni,S. Saccomanno,C. Candelaresi,L. Trozzi,G. Macarri,A. Benedetti,F. Folli

DOI: https://doi.org/10.1016/S0168-8278(03)00291-5

IF: 25.7

2003-10-01

Journal of Hepatology

Abstract:

What problem does this paper attempt to address?

Feasibility research on DC generator based wind power generation system

Hongzhong Ma,Lin Chen,Ping Ju,Haihua Liu,Ning Jiang,Chunning Wang

DOI: https://doi.org/10.1109/SUPERGEN.2009.5348170

2009-01-01

Abstract:The biggest difference between wind turbine generating units and other traditional ones (hydro and thermal generating sets) is its frequent variation of the prime mover output power and difficulties in control, due to the volatility and the uncontrollability of wind speed. In consideration of the characteristics of wind power system and Direct Current (DC) generator, a wind power generation system based on DC generator is developed, and the feasibility and advantages of this system are analyzed theoretically, with emphasis placed on its control strategy. Then, a simulative system of wind power generation system based on DC generator is built in the power system dynamic simulative laboratory. At last the feasibility and advantages of the system are verified by elaborate experiments. Both theoretical analysis and the studies prove the excellent regulating characteristics on the voltage fluctuation caused by the frequently variable wind speed and load changes for the system which working with the variable pitch parts to satisfy the requirement of the dynamo in the wind power system.
Energy Efficiency Enhancement in Full-Bridge PV Inverters with Advanced Modulations

Zhongting Tang,Ariya Sangwongwanich,Yongheng Yang,Frede Blaabjerg

DOI: https://doi.org/10.1016/j.prime.2021.100004

2021-01-01

e-Prime - Advances in Electrical Engineering, Electronics and Energy

Abstract:Transformerless single-phase inverters are preferring in residential grid-connected PV systems when compared to galvanic-isolated ones (i.e., transformer-based inverters). In addition to the special leakage current issue, high efficiency, power quality and reactive power injection are of concern that should be considered in grid-connected applications. Nowadays, the fast development of wide-bandgap (WBG) devices brings new challenges to transformerless inverters, e.g., electromagnetic interference (EMI) issues, but efficiency can be improved. This paper first reviews the full-bridge PV inverters seen from the perspective of topology configuration. The oscillation during switching transitions is analyzed and compared in typical full-bridge inverters under a hybrid modulation method, which has a significant relationship with the EMI issue. Then, power loss distribution is discussed to reveal the thermal performance under the hybrid modulation scheme with reactive power injection. Simulations are carried out on the full-bridge prototype to validate the discussions of the hybrid modulation strategy.
STUDY ON OPERATION MECHANISM OF A NEW TYPE ELECTRO-HYDRAULIC GENERATOR APPLIED IN WIND POWER GENERATION SYSTEM

Yonggang Lin,Jinju Sun,Hongwei Liu,Wei Li,Le Tu

DOI: https://doi.org/10.19912/j.0254-0096.2017.05.030

2017-01-01

Abstract:A new type electro-hydraulic generator was presented which could take the place of the existing wind driven generator in the wind power generation system.The simulation model of wind power generation system was built in the softwares AMESim and Matlab/Simulink and was used to proceed joint simulation.The analysis results showed that the variable velocity constant frequency control of wind power generation system can be achieved by governing the displacement of the variable motor which is a component of the electro-hydraulic generator.What's more,the wind power generation system is characterized by the simple control system and grid friendliness.In additional,the electro-hydraulic generator adopting hydraulic transmission the electromagnetic torque of generator is relatively stable,which improves the stability of the wind power generation system when it runs.
Z-source Inverter Based Grid-interface For Variable-speed Permanent Magnet Wind Turbine Generators

D. Mahinda Vilathgamuwa,X. Y. Wang,King Jet Tseng,C. J. Gajanayake

DOI: https://doi.org/10.48550/arXiv.1307.3799

2013-07-15

Abstract:A Z-source inverter based grid-interface for a variable-speed wind turbine connected to a permanent magnet synchronous generator is proposed. A control system is designed to harvest maximum wind energy under varied wind conditions with the use of a permanent magnet synchronous generator, a diode-rectifier and a Z-source inverter. Control systems for speed regulation of the generator and for DC- and AC- sides of the Z-source inverter are implemented. Laboratory experiments are used to verify the efficacy of the proposed approach.

Systems and Control
Power control and grid-connected operation for tidal current energy conversion system

Ya-jing GU,Wei LI,Hong-wei LIU,Yong-gang LIN,Hai-gang GU

DOI: https://doi.org/10.3785/j.issn.1008-973X.2017.10.011

2017-01-01

Abstract:A special tidal current energy conversion system was taken as an object to analyze the power control characteristic and grid-connected operation property.The mechanical structure was pitching rotorsingle stage drive-permanent magnet synchronous generator.The electrical structure was rectifier-chopperinverter.The model of drive chain from rotor to generator was constructed.A generator speed control strategy based on tidal current velocity preview was proposed considering the undetectable tidal current velocity at rotor.A pitch control based on power feedback was proposed to solve the existing problems of nonlinearity and huge calculation in direct angle feedback pitch control.The grid-connected operation property was analyzed by combining DC bus voltage control and active-reactive current decoupling.The situ experimental results show that the grid-connected system has a good operation property and a high quality of output power.Both the speed control strategy to capture maximum power under the rated tidal current velocity and the pitch control strategy to limit output power above the rated tidal current velocity were verified.
A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems

Xibo Yuan,Jianyun Chai,Yongdong Li

DOI: https://doi.org/10.1109/tste.2012.2184806

IF: 8.31

2012-01-01

IEEE Transactions on Sustainable Energy

Abstract:The power conversion systems for large wind turbines are facing a great challenge as today's wind turbine power outputs approach 5 MW and above. The conventional low voltage power conversion system will suffer from a high transmission current, which significantly increases losses and cost of the cables as well as voltage drop. This paper proposes a modular, medium voltage, high-power converter topology for the large permanent magnet wind generator system, eliminating the grid-side step-up transformer, which is desirable for both onshore and offshore wind turbines. The converter modules are cascaded to achieve medium voltage output. Each converter module is fed by a pair of generator coils with 90 degrees phase shift to get the stable dc-link power. The power factor correction (PFC) circuit enables the generator to achieve unity power factor operation and the generator armature inductance is used as ac-side PFC boost inductance. At the grid-side, H-bridge inverters are connected in series to generate multilevel medium voltage output and the voltage-oriented vector control scheme is adopted to regulate the converter active and reactive power transferred to the grid. Simulation results with a 2-MW wind turbine system and experimental results with a down-scaled 3-kW system validate the proposed topology and control methods. The proposed system can successfully deliver power from the wind generator to the grid.
Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Wenping Cao,Xiaoyan Huang,Ian French,Bin Lu

DOI: https://doi.org/10.1109/icelmach.2008.4800031

2008-01-01

Abstract:This paper describes a preliminary study of a 30 kW doubly-fed induction generator (DFIG) used for wind turbine applications. Wind represents a variable-speed intermittent source of energy in nature and can be controlled to be a nearly constant speed but variable-torque input to the wind turbine using blade pitch angle regulation. Wind profile at the installation site is investigated so as to derive parameterized wind speeds, more importantly, the annual cubic-mean speed. This is taken account into the machine design since the machine efficiency varies with turbine mechanical inputs. By coordinating the loss components, it is possible at the machine design stage to select the maximum efficiency to be near the actual optimized load, in a long run, to maximize the overall energy production of the generator. The DFIG is modeled in Matlab with a vector control. The total energy production is used as a key criterion to refine the machine design.
A Modular Direct-Drive Permanent Magnet Wind Generator System Eliminating the Grid-Side Transformer

Xibo Yuan,Yongdong Li,Jianyun Chai,Minzheng Ma

2009-01-01

Abstract:This paper has presented a modular converter for multi-coil direct-drive permanent magnet wind generator system. The converter modules are connected in series to achieve medium voltage output, thus eliminating the grid-side step-up transformer. The generator coils with 90 degree phase shift are rectified through power factor correction (PFC) circuit and connected in parallel to get unit power factor and stable dc-link power. The generator armature inductance is used as the AC-side PFC boost inductor, reducing the system size and cost. The required value of the inductor is derived based on the current ripple and zero-crossing distortion. The H-bridge inverters are cascaded to achieve multilevel voltage output and the vector control scheme is adopted to regulate the converter active and reactive power transferred to the grid. Simulation results with a 1.5MW wind system and experimental results with a scaled 3kW system validate the proposed topology and control method.
Design and Test of a 600-Kw Horizontal-Axis Tidal Current Turbine

Yangjian Li,Hongwei Liu,Yonggang Lin,Wei Li,Yajing Gu

DOI: https://doi.org/10.1016/j.energy.2019.05.154

IF: 9

2019-01-01

Energy

Abstract:Tidal current energy is a promising renewable energy resource. Full scale tidal current turbines (TCT) have been deployed all over the world. To verify the design methods of large TCTs with high reliability and efficiency, a 600-kW tidal current turbine was designed and tested in this study. This turbine consisted of a two-blade rotor, a low speed ratio gearbox and a medium speed generator. The turbine was grid-connected through a full-rated converter, and its speed was controlled to capture the maximum power. First, to reach high turbine performance, system design details and maximum power point tracking (MPPT) control strategy were considered. Then, the 600-kW turbine was manufactured, and an onshore test was carried out to test power transmission and control performance. The power performance of the blades and control system were further tested in the sea trial carried out in Zhoushan. Good agreement was obtained between theoretical analyses and test results. Finally, to ascertain causes for observed power fluctuations, the power spectral density (PSD) was analyzed; the results indicated that power fluctuations may be due to stream shear.
MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Hongwei Liu,Wei Li,Yonggang Lin,Shun Li

DOI: https://doi.org/10.3321/j.issn:0254-0096.2009.05.014

2009-01-01

Abstract:The 5 kW horizontal axis turbine prototype was considered, and the computer fluid dynamic theory and simulation methods of fluid-structure coupling was used to study the dynamic characteristic of the blade; and the driving torque was calculated through additions of fraction solution with BEM. Then the permanent magnet synchronous generator model was constructed and current control method for capturing maximum power was studied for the off-grid system. At last the simulation model of the device was constructed in Matlab/Simulink and simulated, and the comparisons between the simulated results and the test results prove the validity of the model and the current control method can improve the energy capture efficiency at low-velocity current.
Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

Wenting Chen,Yonggang Lin,Wei Li,Hongwei Liu,Le Tu,Hao Meng

DOI: https://doi.org/10.1049/iet-rpg.2018.6105

IF: 3.034

2019-01-01

IET Renewable Power Generation

Abstract:A wind turbine is the most typical machine used to capture energy from the wind. The system design goal of a wind turbine is to obtain as much energy as possible from the wind while transmitting as much of that energy to the grid as possible, all under the highest possible level of stability. Currently, many inherent weaknesses result in a high failure rate in common commercial wind turbines with gear drive systems. To improve the performance, in this study, a typical 1.5 MW gear transmission was redesigned into a novel hydromechanical transmission system (HMTS). Parameters related to the HMTS efficiency were analysed to ensure that the efficiency was relatively high. The variable speed ratio (VSR) and torque triple absorption (TTA) principle were thoroughly deduced. Moreover, a MATLAB/Simulink- AMESim cosimulation model was proposed, and a 30 kW proportional prototype was established. Both simulation and experimental results show that the structural design and proposed control strategies meet the design goals, including a relatively high transmission efficiency around the rated wind speed, speed control below the rated wind speed, and torque control above the rated wind speed. These achievements should guarantee the future application of the novel transmission system in wind turbines.
Hybrid Power Transmission Technology in a Wind Turbine Generation System

Yonggang Lin,Le Tu,Hongwei Liu,Wei Li

DOI: https://doi.org/10.1109/tmech.2014.2328629

2014-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:The direct-drive hydraulic pump suffers the disadvantages of large displacement and difficulty of manufacture. This paper thus proposes a hybrid power transmission technology that utilizes a single-stage gear transmission and low-speed hydraulic pump. The transmission technology reduces the displacement of the hydraulic pump and retains the torque-stable feature of a hydrostatic transmission. This paper designs the basic structure of a hybrid power transmission system and constructs the system model using the AMESim and MATLAB software. Under the grid-connected circumstance, the variable-speed constant-frequency control algorithm when the wind speed is below the rated value and the pitch control algorithm when the wind speed is above the rated value are simulated and analyzed. A 20-kW prototype has been developed. The simulation and the experimental data demonstrate that a hybrid power transmission meets the demands in various working conditions and stabilizes the torque of a wind turbine generation system.
Real-time Simulation of Wind Turbine Converter-Grid Systems

Shahil Shah,Ignacio Vieto,Nian Heng,Jian Sun

DOI: https://doi.org/10.1109/ipec.2014.6869686

2014-01-01

Abstract:This paper presents real-time simulation of both Type-III and Type-IV wind turbines connected to the power grid. Detailed switching models of the converter are used in conjunction with complete turbine and converter control models to evaluate the feasibility of real-time simulation using commercial real-time simulation platforms. In addition to time-domain responses, frequency-domain characteristics, such as inverter output impedance, and possible harmonic resonance as well as subsynchronous interactions with the grid are also determined and compared with offline simulation as well as experimental measurements using a scaled-down hardware to verify the ability of real-time simulation in predicting high-frequency dynamics and control instability of wind turbine converters. The developed real-time simulation models will be used to study wind turbine behavior under different and variable grid conditions, including control interactions with other power electronics devices connected to the power grid.
Study and Design of Grid Connected Inverter for 2 MW Wind Turbine

Zhiling Qiu,Guozhu Chen

DOI: https://doi.org/10.1109/07ias.2007.23

2007-01-01

Abstract:In mega watts' grid connected inverter for wind turbine, challenge exists in module parallel for high power, low switching frequency and optimized design of output LCL filter. Concerning with these key issues, this paper adopts filter inductor to realize current sharing and phase shifting of carrier wave to increase equivalent switching frequency; correspondently, optimized design rule of the LCL filter is given in detail. All approaches and design rules come from a practical project implementation and based on deep principle analysis. These schemes are validated feasible for high power inverter by simulation results.
Analysis and Performance Of Grid Connected Straight Driven Pmsg Based Wind Turbines

Eswaraiah G, Et. al.

DOI: https://doi.org/10.17762/turcomat.v12i2.1211

2021-04-11

Turkish Journal of Computer and Mathematics Education (TURCOMAT)

Abstract:Permanent-magnet synchronous generator (PMSG) are used widely in wind turbine applications. The performance analysis of PMSG can be enhanced by adopting a number of control mechanisms with the benefit of advanced optimization techniques. Renewable energy is harnessed from continuously replenishing natural processes. Some commonly known are sunlight, water, wind, tides, geothermal heat and various forms of biomass. The focus on renewable energy has over the past few decades intensified greatly. This paper presents modeling and control strategy for the grid connected wind turbine system based on Permanent Magnet Synchronous Generator (PMSG). The considered system is based on back-to-back converter topology. The Grid Side Converter (GSC) achieves the DC bus voltage control and unity power factor. The Machine Side Converter (MSC) assures the PMSG speed control. The PMSG is used as a variable speed generator and connected directly to the turbine without gearbox. The pitch angle control is not either considered in this study. Further, Optimal Tip Speed Ratio based MPPT control strategy is used to ensure the most energy efficiency whatever the wind speed variations. A filter (L) is put between the GSC and the grid to reduce current ripple and to improve the injected power quality.During grid faults, a hierarchical coordinated control scheme for the generator-side converter, main grid-side converter and auxiliary grid-side converter, depending on the grid voltage sags, is presented to enhance the low voltage ride through (LVRT) capability of the direct-driven PMSG WT.
Study of Converter System Topology for Direct-Driven Wind Generation System

Zhang Gang,Chai Jianyun,Quan Hengli,Ruan Baishui

2011-01-01

Abstract:To meet the demands of direct-driven wind generation system for large capacity, high power density and high reliability, parallel schemes for power modules and converters are both proposed. Firstly, the parallel technology of power modules is used to expand the single converter’s capacity. The differential mode inductor is adopted to limit the dynamic circulating current, which is simple and reliable. Secondly, by means of the winding-insulation of six-phase permanent magnet synchronous generator, the zero-sequence circulating current among parallel converters is eliminated. The parallel of converters can expand the system capacity, and improve the redundancy and reliability. Also, the total harmonic currents injected into grid can be reduced by use of interleaved space vector modulation. The feasibility of the converter system scheme is verified by the experiment.
Control of Variable Pitch, Variable Speed Wind Turbine in Weak Grid Systems

Xibo Yuan,Yongdong Li

DOI: https://doi.org/10.1049/iet-rpg.2012.0212

IF: 3.034

2014-01-01

IET Renewable Power Generation

Abstract:In the case of operating in a weak grid system, when wind power becomes a significant portion of the power system or even the sole energy source, the wind power generator and its converter are expected to help maintain the grid voltage amplitude and frequency, operating like the conventional large synchronous generator (SG). The grid-side converter needs to work as a voltage source to regulate the terminal (grid) voltage amplitude and frequency, which can be achieved by controlling the reactive power and active power flow, respectively. For the direct drive permanent magnet synchronous generator with full power converter, the reactive power can be supplied from the grid-side converter and the active power should be provided by the captured wind power. The power balance between the source (wind) and the grid (load) can be achieved by actively controlling the generator speed and the pitch angle, thus adjusting the wind power input. In the paper, the coordinated control of generator speed and pitch angle are proposed, enabling the generator output power to track the load power. The proposed scheme fully utilizes the system rotational energy by the speed control and the pitch control is used for limiting the speed range and the wind power capture as well. The droop method is used for power sharing among multiple paralleled grid-side wind power converters and the converter dynamics is also considered. The simulation is carried out with different wind speed and load conditions and the results show the proper operation of the proposed control scheme.
A Transformerless Modular Permanent Magnet Wind Generator System with Minimum Generator Coils

Xibo Yuan,Yongdong Li,Jianyun Chai

DOI: https://doi.org/10.1109/apec.2010.5433526

2010-01-01

Abstract:This paper has presented a modular converter for multi-coil direct-drive permanent magnet wind generator system. The converter modules are cascaded to achieve medium voltage output (6 kV~33 kV), thus eliminating the grid-side step-up transformer, which is desirable for both on-shore and offshore wind turbines. Each converter module is composed of a rectifier, dc-link and an inverter. The generator coils with 90 degree phase shift are rectified through the power factor correction (PFC) circuit and connected in series to get unity power factor, stable dc-link power and higher dc-link voltage. The generator armature inductance is used as the AC-side PFC boost inductor, thus reducing the system size and cost. The inverter adopts a neutral point clamped (NPC) five-level converter to match the dc-link voltage level and are cascaded to achieve multilevel medium voltage output. The vector control scheme is used to regulate the converter active and reactive power transferred to the grid. Simulation results with a 1.5 MW wind generator and converter system and experimental results with a scaled 3 kW system validate the proposed topology and control method.
Real-Time Emulation of a Grid-Connected Wind Energy Conversion System Based Double Fed Induction Generator Configuration under Random Operating Modes

Dekali Zouheyr,Baghli Lotfi,Boumediene Abdelmadjid

DOI: https://doi.org/10.18280/ejee.230305

2021-06-21

European Journal of Electrical Engineering

Abstract:This paper presents the design, modeling, simulation and the experimental implementation of a 1.5 kW relatively low-cost wind energy conversion system (WECS) based on the double fed induction generator (DFIG) configuration. In the preliminary experiments, we test the DFIG power control under fixe speed by applying the vector control principle, then we insert the physical emulator presented in the controlled DC motor in order to simulate the static-dynamic behaviors of a real wind turbine with the use of the Tip Speed Ratio TSR based MPPT algorithm to extract the maximum available power on the emulator. The proposed structure is simulated using MATLAB Simulink environment, the obtained results are validated experimentally on our laboratory setup. We also develop an application with MATLAB AppDesigner that calculates the operating point of our system at steady state and visualize the power transfer, current, voltage and electromagnetic torque values of the DFIG and the DC motor before starting the stimulation or the experimental manipulation. The MPPT, the DC motor control and the DFIG power control algorithms are implanted in C, embedded on a dSPACE DS1104 control board. The obtained results confirm the reliability of the proposed WECS to manage all the probable operating modes, also the effectiveness of the physical simulator in the role of wind turbine emulation.
A Non-Equilibrium Thermodynamic Approach for Analysis of Power Conversion Efficiency in the Wind Energy System

Ihor Shchur,Marek Lis,Yurii Biletskyi,Shchur,Lis,Biletskyi

DOI: https://doi.org/10.3390/en16135234

IF: 3.2

2023-07-07

Energies

Abstract:This article proposes an approach and develops an appropriate method of applying linear non-equilibrium thermodynamics to analyze energy processes, in particular using the example of the wind energy conversion system (WECS) with a directly connected vertical axis wind turbine (VAWT) and vector-controlled permanent magnet synchronous generator (PMSG). The main steps of the proposed approach are the description of the component subsystems as universal linear or linearized energy converters (ECs), which are characterized by several dimensionless parameters, the main one of which is the degree of coupling between their input and output. According to their value, as well as justified efficiency criteria, the optimal operating points of each ECs can be easily found. Such an approach makes it possible to abstract from physical laws of a different nature and equally assess the work of each of the subsystems. The next step is a connection of the received ECs. As shown in the paper, for the most common cascade connection of ECs, there are the best conditions for their connection, under which the newly formed equivalent EC can have maximum efficiency. This opens up an opportunity to analyze the influence of already real parameters of cascaded interconnected subsystems on the quality of their connection and justify specific solutions that would not have been seen without this approach. For example, in this study, from all parameters of the PMSG, only the selection of the optimal rated inductance of the armature winding made it possible to improve the quality of the connection of the PMSG with a specific VAWT and approximate the efficiency of the entire WECS to the maximum possible, especially in medium and high winds.

energy & fuels

Regulation of ERK/JNK/p70S6K in two rat models of liver injury and fibrosis.

Feasibility research on DC generator based wind power generation system

Energy Efficiency Enhancement in Full-Bridge PV Inverters with Advanced Modulations

STUDY ON OPERATION MECHANISM OF A NEW TYPE ELECTRO-HYDRAULIC GENERATOR APPLIED IN WIND POWER GENERATION SYSTEM

Z-source Inverter Based Grid-interface For Variable-speed Permanent Magnet Wind Turbine Generators

Power control and grid-connected operation for tidal current energy conversion system

A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

A Modular Direct-Drive Permanent Magnet Wind Generator System Eliminating the Grid-Side Transformer

Design and Test of a 600-Kw Horizontal-Axis Tidal Current Turbine

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

Hybrid Power Transmission Technology in a Wind Turbine Generation System

Real-time Simulation of Wind Turbine Converter-Grid Systems

Study and Design of Grid Connected Inverter for 2 MW Wind Turbine

Analysis and Performance Of Grid Connected Straight Driven Pmsg Based Wind Turbines

Study of Converter System Topology for Direct-Driven Wind Generation System

Control of Variable Pitch, Variable Speed Wind Turbine in Weak Grid Systems

A Transformerless Modular Permanent Magnet Wind Generator System with Minimum Generator Coils

Real-Time Emulation of a Grid-Connected Wind Energy Conversion System Based Double Fed Induction Generator Configuration under Random Operating Modes

A Non-Equilibrium Thermodynamic Approach for Analysis of Power Conversion Efficiency in the Wind Energy System