Impact of heat treatment on miscibility of proteins and disaccharides in frozen solutions.

K. Izutsu,C. Yomota,H. Okuda,T. Kawanishi,T. Randolph,J. Carpenter

DOI: https://doi.org/10.1016/j.ejpb.2013.05.004

IF: 5.589

2013-10-01

European Journal of Pharmaceutics and Biopharmaceutics

Abstract:

What problem does this paper attempt to address?

Timing-Driven Obstacle-Avoiding X-Architecture Steiner Minimum Tree Algorithm With Slack Constraints

Yuhan Zhu,Genggeng Liu,Ren Lu,Xing Huang,Min Gan,Wenzhong Guo

DOI: https://doi.org/10.1109/tsmc.2024.3353534

2024-01-01

IEEE Transactions on Systems, Man, and Cybernetics: Systems

Abstract:SMT is an optimized model for solving the routing problem of a multipin net in very large-scale integrated circuits. As the appearance of various obstacles on chips, the obstacle-avoiding problem has attracted much attention in recent years. Meanwhile, since interconnect delay plays a major role in chip delay, timing analysis is another critical problem worthy of consideration when constructing an Steiner minimum tree (SMT). Furthermore, the introduction of the X-architecture allows for better utilization of routing resources. In this article, a timing-driven obstacle-avoiding X-architecture Steiner minimum tree algorithm with slack constraints (TD-OAXSMT-SC) is proposed to consider obstacle-avoiding, timing slack constraints, and X-architecture simultaneously for the first time. The TD-OAXSMT-SC algorithm consists of four major stages: 1) in the routing tree initialization stage, this article constructs an X-architecture Prim–Dijkstra spanning tree as the initial routing tree with minimum total delay; 2) in the particle swarm optimization (PSO)-based routing tree iteration stage, a novel discrete PSO algorithm based on genetic operators is proposed to obtain a high-quality routing tree; 3) in the routing tree standardization stage, two effective standardization strategies are proposed to obtain a routing tree that satisfies both obstacle-avoiding and timing slack constraints; and 4) in the routing tree optimization stage, the connection of interconnected wires is optimized in a global manner, thus obtaining an optimized routing tree. Experimental results show that the proposed TD-OAXSMT-SC algorithm outperforms the state-of-the-art methods in routing quality with slack constraints.

automation & control systems,computer science, cybernetics
A novel particle swarm optimizer with multi-stage transformation and genetic operation for VLSI routing

Genggeng Liu,Zhen Zhuang,Wenzhong Guo,Naixue Xiong,Guolong Chen

DOI: https://doi.org/10.48550/arXiv.1811.10225

2018-11-26

Neural and Evolutionary Computing

Abstract:As the basic model for very large scale integration (VLSI) routing, the Steiner minimal tree (SMT) can be used in various practical problems, such as wire length optimization, congestion, and time delay estimation. In this paper, a novel particle swarm optimization (PSO) algorithm based on multi-stage transformation and genetic operation is presented to construct two types of SMT, including non-Manhattan SMT and Manhattan SMT. Firstly, in order to be able to handle two types of SMT problems at the same time, an effective edge-vertex encoding strategy is proposed. Secondly, a multi-stage transformation strategy is proposed to both expand the algorithm search space and ensure the effective convergence. We have tested three types from two to four stages and various combinations under each type to highlight the best combination. Thirdly, the genetic operators combined with union-find partition are designed to construct the discrete particle update formula for discrete VLSI routing. Moreover, in order to introduce uncertainty and diversity into the search of PSO algorithm, we propose an improved mutation operation with edge transformation. Experimental results show that our algorithm from a global perspective of multilayer structure can achieve the best solution quality among the existing algorithms. Finally, to our best knowledge, it is the first work to address both manhattan and non-manhattan routing at the same time.
Performance-driven X-architecture Routing Algorithm for Artificial Intelligence Chip Design in Smart Manufacturing

Genggeng Liu,Yuhan Zhu,Saijuan Xu,Hao Tang,Yeh-Cheng Chen

DOI: https://doi.org/10.1145/3519422

2022-03-24

ACM Transactions on Management Information Systems

Abstract:The new 7nm Artificial Intelligence (AI) chip is an important milestone recently announced by the IBM research team, with a very important optimization goal of performance. This chip technology can be extended to various business scenarios in the Internet of Things. As the basic model for Very Large Scale Integration (VLSI) routing, the Steiner minimal tree can be used in various practical problems, such as wirelength optimization and timing closure. Further considering the X-architecture and the routing resources within obstacles, an effective performance-driven X-architecture routing algorithm for AI chip design in smart manufacturing is proposed to improve the delay performance of the chip. Firstly, a special particle swarm optimization algorithm is presented to solve the discrete length-restricted X-architecture Steiner minimum tree problem in combination with genetic operations, and a particle encoding scheme is presented to encode each particle into an initial routing tree. Secondly, two look-up tables based on pins and obstacles are established to provide a fast information query for the whole algorithm flow. Thirdly, a strategy of candidate point selection is designed to make the particles satisfy the constraints. Finally, a refinement strategy is implemented to further improve the quality of the final routing tree. Compared with other state-of-the-art algorithms, the proposed algorithm achieves a better total wirelength, which is an important index of performance, thus better satisfying the demand for delay performance of AI chip design in smart manufacturing.
A Full-Scale Solution to the Rectilinear Obstacle-Avoiding Steiner Problem

Tom Tong Jing,Yu Hu,Zhe Feng,Xian-Long Hong,Xiaodong Hu,Guiying Yan

DOI: https://doi.org/10.1016/j.vlsi.2007.10.002

IF: 1.345

2008-01-01

Integration

Abstract:Routing is one of the important steps in very/ultra large-scale integration (VLSI/ULSI) physical design. Rectilinear Steiner minimal tree (RSMT) construction is an essential part of routing. Macro cells, IP blocks, and pre-routed nets are often regarded as obstacles in the routing phase. Obstacle-avoiding RSMT (OARSMT) algorithms are useful for practical routing applications. However, OARSMT algorithms for multi-terminal net routing still cannot meet the requirements of practical applications. This paper focuses on the OARSMT problem and gives a solution to full-scale nets based on two algorithms, namely An-OARSMan and FORSTer. (1) Based on ant colony optimization (ACO), An-OARSMan can be used for common scale nets with less than 100 terminals in a circuit. An heuristic, greedy obstacle penalty distance (OP-distance), is used in the algorithm and performed on the track graph. (2) FORSTer is a three-step heuristic used for large-scale nets with more than 100 terminals in a circuit. In Step 1, it first partitions all terminals into some subsets in the presence of obstacles. In Step 2, it then connects terminals in each connected graph with one or more trees, respectively. In Step 3, it finally connects the forest consisting of trees constructed in Step 2 into a complete Steiner tree spanning all terminals while avoiding all obstacles. (3) These two graph-based algorithms have been implemented and tested on different kinds of cases. Experimental results show that An-OARSMan can handle both convex and concave polygon obstacles with short wire length. It achieves the optimal solution in the cases with no more than seven terminals. The experimental results also show that FORSTer has short running time, which is suitable for routing large-scale nets among obstacles, even for routing a net with one thousand terminals in the presence of 100 rectangular obstacles.
An O ( N Log N ) Algorithm for Obstacle-Avoiding Routing Tree Construction in the Λ-Geometry Plane

Zhe Feng,Yu Hu,Tong Jing,Xianlong Hong,Xiaodong Hu,Guiying Yan

DOI: https://doi.org/10.1145/1123008.1123020

2006-01-01

Abstract:Routing is one of the important phases in VLSI/ULSI physical design. The obstacle-avoiding rectilinear Steiner minimal tree (OARSMT) construction is an essential part of routing since macro cells, IP blocks, and pre-routed nets are often regarded as obstacles in the routing phase. Efficient OARSMT algorithms can be employed in practical routers iteratively. Recently, IC routing and related researches have been extended from Manhattan architecture (λ 2- geometry) to Y- / X-architecture (λ 3- / λ 4- geometry) to improve the chip performance. This paper presents an O ( n log n ) heuristic, λ-OASMT, for obstacle-avoiding Steiner minimal tree construction in the λ-geometry plane. Based on obstacle-avoiding constrained Delaunay triangulation, a full connected tree is constructed and then embedded into λ-OASMT by a novel method called zonal combination. To the best of our knowledge, this is the first work addressing the λ-OASMT problem. Compared with two most recent works on OARSMT problem, λ-OASMT obtains up to 30Kx speedup with an even better quality solution. We have tested randomly generated cases with up to 1K terminals and 10K rectilinear obstacles within 3 seconds on a Sun V880 workstation (755MHz CPU and 4GB memory). The high efficiency and accuracy of λ-OASMT make it extremely practical and useful in the routing phase, as well as interconnect estimation in the process of floorplanning and placement.
Obstacle-Avoiding Rectilinear Minimum-Delay Steiner Tree Construction Towards Ip-Block-Based Soc Design

Jy Xu,Xl Hong,T Jing,Y Yang

DOI: https://doi.org/10.1109/TCSII.2005.862041

2005-01-01

Abstract:With System-on-Chip design, IP blocks form routing obstacles that deteriorate global interconnect delay. In this paper we present a new approach for obstacle-avoiding rectilinear minimal delay Steiner tree (OARMDST) construction. We formalize the solving of minimum delay tree through the concept of an extended minimization function, and trade the objective into a top-down recursion, which wisely produces delay minimization from source to critical sinks. We analyze the topology generation with treatment of obstacles and exploit the connection flexibilities. To our knowledge, this is the first in-depth study of OARMDST problem based on topological construction. Experimental results are given to demonstrate the efficiency of the algorithm.
An-OARSMan

Yu Hu,Tong Jing,Xianlong Hong,Zhe Feng,Xiaodong Hu,Guiying Yan

DOI: https://doi.org/10.1145/1120725.1120732

2005-01-01

Abstract:Routing is one of the important steps in VLSI/ULSI physical design. The rectilinear Steiner minimum tree (RSMT) construction is an essential part of routing. Since macro cells, IP blocks, and pre-routed nets are often regarded as obstacles in the routing phase, obstacle-avoiding RSMT (OARSMT) algorithms are useful for practical routing applications. This paper focuses on the OARSMT problem and presents an algorithm, named An-OARSMan, based on ant colony optimization. A greedy obstacle penalty distance (OP-distance) local heuristic is used in the algorithm and performed on the track graph. The algorithm has been implemented and tested on different kinds of obstacles. Experimental results show that An-OARSMan can handle complex obstacle cases including both convex and concave polygon obstacles with good length performance. It can always achieve the optimal solution in the cases with no more than 7 terminals.
Graph Steiner tree construction and its routing applications

Jun Dong,Hengliang Zhu,Min Xie,Xuan Zeng

DOI: https://doi.org/10.1109/ASICON.2013.6811916

2013-01-01

Abstract:A new heuristic algorithm is presented for graph Steiner tree problem (GSTP) with high quality solution. It consists of four steps based on tree splitting and merging. Then we apply this new heuristic algorithm to IC chip routing applications including obstacle-avoiding rectilinear Steiner minimal tree problem (OARSMT) for Manhattan architecture and obstacle-avoiding octilinear Steiner minimal tree problem (OAOSMT) for X-architecture. Through escape graph, OARSMT is converted to GSTP. We also propose several geometric transformations to construct OAOSMT from OARSMT. Experimental results show our heuristic algorithm for GSTP can get better solutions than traditional classic heuristic algorithms and our method to construct OAOSMT can reduce total wire length by at most 15%, compared with the wire length of OARSMT.
Spanning graph-based nonrectilinear steiner tree algorithms

Qi Zhu,Hai Zhou,Tong Jing,X. -L. Hong,Yang Yang

DOI: https://doi.org/10.1109/TCAD.2005.850862

IF: 2.9

2005-01-01

IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems

Abstract:With advances in fabrication technology of very/ultra large scale integrated circuit (VLSI/ULSI), we must face many new challenges. One of them is the interconnect effects, which may cause longer delay and heavier crosstalk. To solve this problem, many interconnect performance optimization algorithms have been proposed. However, when these algorithms are designed based on rectilinear interconnect architecture, the optimization capability is limited. Therefore, nonrectilinear interconnect architectures become a field of active research in which the octilinear interconnect architecture is the most promising one since it extends from the rectilinear case and greatly shortens the wire length. Meanwhile, an interconnect with less length is helpful to reduce wire capacitance, congestion, and routing area. In an interconnect architecture, the Steiner minimal tree (SMT) construction is one of the key problems. In this paper, we give two practical octilinear Steiner minimal tree (OSMT) construction algorithms based on octilinear spanning graphs (OSGs). The one with edge substitution (OST-E) has a worst-case running time of O(nlogn) and a similar performance as the recent work using batched greedy. The other one with triangle contraction (OST-T) has a small increase in the constant factor of running time and a better performance. These two are the fastest algorithms for octilinear Steiner tree construction so far. Experiments on both industrial and random test cases are conducted to compare with other programs. We also proposed the extension of our algorithms to any λ geometry.
Lambda-Oat: Lambda-Geometry Obstacle-Avoiding Tree Construction with O (N Log N) Complexity

Tom Tong Jing,Zhe Feng,Yu Hu,Xianlong L. Hong,Xiaodong D. Hu,Guiying Y. Yan

DOI: https://doi.org/10.1109/tcad.2007.896291

IF: 2.9

2007-01-01

IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems

Abstract:Obstacle-avoiding rectilinear Steiner minimal tree (OARSMT) construction is an essential part of routing. Recently, IC routing and related researches have been extended from Manhattan architecture (lambda2-geometry) to Y-/X-architecture (lambda3-lambda4-geometry) to improve the chip performance. This paper presents an O(n log n) heuristic, lambda-OAT, for obstacle-avoiding Steiner minimal tree construction in the lambda-geometry plane (lambda-OASMT). In this paper, based on obstacle-avoiding constrained Delaunay triangulation, a full connected tree is constructed and then embedded into lambda-OASMT by zonal combination. To the best of our knowledge, this is the first work addressing the lambda-OASMT problem. Compared with most recent works on OARSMT problem, lambda-OAT obtains up to 30-Kx speedup with quality solution. We have tested randomly generated cases with up to 10 K terminals and 10-K rectilinear obstacles within 4 seconds on a Sun V880 workstation (755-MHz CPU and 4-GB memory). The high efficiency and accuracy of lambda-OAT make it extremely practical and useful in the routing phase.
A Robust Multilayer X-Architecture Global Routing System Based on Particle Swarm Optimization

Genggeng Liu,Yuhan Zhu,Zhen Zhuang,Zhenyu Pei,Min Gan,Xing Huang,Wenzhong Guo

DOI: https://doi.org/10.1109/tsmc.2024.3407960

2024-08-21

IEEE Transactions on Systems Man and Cybernetics Systems

Abstract:Global routing is an extremely important stage of very large scale integration (VLSI) physical design. With the rise of nano-scale integrated circuit design, the multilayer global routing problem has attracted considerable research interest during the past few years. In this article, a multilayer X-architecture global routing (ML-XGR) system based on particle swarm optimization (PSO), called FZU-Router, is proposed to solve the ML-XGR problem for the first time. FZU-Router contains a multilayer X-architecture integer linear programming (MX-ILP) model and a multilayer X-architecture PSO (MX-PSO) algorithm, which are presented to formulate and solve the ML-XGR problem, respectively. Moreover, four effective strategies are designed to enhance the efficiency of FZU-Router: 1) a strategy for generating new routing modes is proposed to strengthen the robustness of encoding strategy of MX-PSO; 2) a strategy for combining MX-PSO with maze routing is proposed to improve the routability; 3) a strategy for reducing the channel capacity is proposed to make better use of optimization ability of MX-PSO; and 4) a strategy for dynamic resource assignment is proposed to make better use of routing resources and shorten the running time. Experimental results on multiple benchmarks confirm that the proposed FZU-Router leads to fewer total overflow and shorter total wirelength compared with the state-of-the-art routers.

automation & control systems,computer science, cybernetics
ACO-Steiner: Ant Colony Optimization Based Rectilinear Steiner Minimal Tree Algorithm

Yu Hu,Tong Jing,Zhe Feng,Xian-Long Hong,Xiao-Dong Hu,Gui-Ying Yan

DOI: https://doi.org/10.1007/s11390-006-0147-0

IF: 1.871

2006-01-01

Journal of Computer Science and Technology

Abstract:The rectilinear Steiner minimal tree (RSMT) problem is one of the fundamental problems in physical design, especially in routing, which is known to be NP-complete. This paper presents an algorithm, called ACO-Steiner, for RSMT construction based on ant colony optimization (ACO). An RSMT is constructed with ants' movements in Hanan grid, and then the constraint of Hanan grid is broken to accelerate ants' movements to improve the performance of the algorithm. This algorithm has been implemented on a Sun workstation with Unix operating system and the results have been compared with the fastest exact RSMT algorithm, GeoSteiner 3.1 and a recent heuristic using batched greedy triple construction (BGTC). Experimental results show that ACO-Steiner can get a short running time and keep the high performance. Furthermore, it is also found that the ACO-Steiner can be easily extended to be used to some other problems, such as rectilinear Steiner minimal tree avoiding obstacles, and congestion reduction in global routing.
FORst: A 3-Step Heuristic For Obstacle-avoiding Rectilinear Steiner Minimal Tree Construction ?

Yu Hu,Zhe Feng,Tong Jing,Xianlong Hong,Yang Yang,Ge Yu,Xiaodong Hu,Guiying Yan

2004-01-01

Abstract:Macro cells, IP blocks, and pre-routed nets are often regarded as obstacles in VLSI routing phase. Obstacle-avoiding rectilinear Steiner minimum tree (OARSMT) algorithms are often used to meet the needs of practical routing applications. However, OARSMT algorithms with multi-terminal nets routing still can not satisfy the requirements of practical applications. This paper presents a 3-step heuristic, named FORst, to tackle the OARSMT problem. In Step1, we partition all terminals into some subsets in the presence of obstacles. Then in Step2, we connect terminals in each connected graph with one or more trees, respectively. In Step3, we connect the forest consisting of trees constructed in Step2 into a completed Steiner tree spanning all terminals while avoiding all obstacles. Two algorithms, called ACO-RSMT and GFST-RSMT, are proposed to construct OARSMT in a connected graph in Step2, which are suitable for difierent situations. This algorithm has been implemented and tested on cases with typical obstacles. The experimental results show that FORst is with great e-ciency and can get good performance. Moreover, it can tackle large scale nets among complex obstacles, such as a net with 1000 terminals in the presence of 100 rectangular obstacles.
CDCtree: Novel Obstacle-Avoiding Routing Tree Construction Based on Current Driven Circuit Model

Yiyu Shi,Tong Jing,Lei He,Zhe Feng,Xianlong Hong

DOI: https://doi.org/10.1145/1118299.1118447

2006-01-01

Abstract:Routing tree construction is a fundamental problem in modern VLSI design. In this paper we propose CDC-Tree, an Obstacle-Avoiding Rectilinear Steiner Minimum Tree (OARSMT) heuristic algorithm to construct an OARSMT. CDC-Tree is based on the current driven circuit (CDC) model mapped from an escape graph. The circuit structure comes from the topology of the escape graph, with each edge replaced by a resistor indicating the wirelength of that edge. By performing DC analysis on the circuit and selecting the edges according to the current distribution to construct an OARSMT, the wirelength of the resulting tree is short. The algorithm has been implemented and tested on cases of different scales and with different shapes of obstacles. Experiments show that CDCTree can achieve shorter wirelength than the existing best algorithm, An-OARSMan, when the terminal number of a net is less than 50.
An Efficient 2-Step Heuristics for Rectilinear Steiner Minimal Tree Construction among Obstacles

Yang Yang Jing,Tong Hong,Xianlong,Zhu Qi,Wang Yin

DOI: https://doi.org/10.3321/j.issn:1003-9775.2005.02.005

2005-01-01

Journal of Computer-Aided Design & Computer Graphics

Abstract:A primary tree is first constructed without considering obstacles. Intersections of the primary tree edges with obstacles are found out and relevant parts of the primary tree are reconnected to keep clear of obstacles while the total length of the tree being shortest. Moreover, a preprocessing and post-processing are added into the second step to tackle some special treatments and improve the solution quality. The heuristics can deal with multi-obstacle and obstacles of diversified shapes with O(mn) complexity, where m is the number of obstacles and n is the number of terminals. Experimental tests on MCNC benchmarks show that the algorithm can get good results on wire length, its average redundancy compared with minimal trees is 5.31% and the runtime for all cases is within 1 second.
A routing paradigm with novel resources estimation and routability models for x-architecture based physical design

Yu Hu,Tong Jing,Xianlong Hong,Xiaodong Hu,Guiying Yan

DOI: https://doi.org/10.1007/11512622_37

2005-01-01

Abstract:The increment of transistors inside one chip has been following Moore's Law. To cope with dense chip design for VLSI systems, a new routing paradigm, called X-Architecture, is introduced. In this paper, we present novel resources estimation and routability models for standard cell global routing in X-Architecture. By using these models, we route the chip with a compensation-based convergent approach, called COCO, in which a random sub-tree growing (RSG) heuristic is used to construct and refine routing trees within several iterations. The router has been implemented and tested on MCNC and ISPD'98 benchmarks and some industrial circuits. The experimental results are compared with two typical existing routers (labyrinth and SSTT). It indicates that our router can reduce the total wire length and overflow more than 10% and 80% on average, respectively.
Steiner Tree Based Routing Algorithm In Consideration Of Optical Proximity Correction

Wei Zhang,Yici Cai,Qiang Zhou,Xianlong Hong

DOI: https://doi.org/10.1109/ICCCAS.2006.285166

2006-01-01

Abstract:As the technology migrates into ultra deep submicron era, the critical dimension of the circuits has become smaller than the lithographic wavelength. Due to the unavoidable diffraction and interaction phenomena of subwavelength technologies, the deformations between the image on wafer and layout have become one of the major factors in performance and yield rate. Optical proximity correction is one of the critical compensation methodologies to correct the deformations as a post layout process. But the results rely much on the original layout and the process is quite time-consuming. This paper presents a detailed router that considers the optical effect in the routing algorithm. The light diffraction is pre-calculated and stored in look-up tables. These costs are used as a weight to guide the sequential routing. The constructed force directed Steiner Tree routing is used to enhance routing efficiency. Experiments were done on industrial instances. And Results showed an efficient run-time and improvements on optical effects.
Power Transmission and Transformation Project Establishing and Decision-Making Based on ASU-MOPSO Algorithm

Ke Sun,Kai Xu,Zhao Ming Zheng,Xiao Yu Ding,Hong Wei Chen,Quan Yuan Jiang

DOI: https://doi.org/10.4028/www.scientific.net/amm.521.521

2014-01-01

Applied Mechanics and Materials

Abstract:This paper demonstrates an asynchronous-stepwise updated strategy multi-objective particle swarm optimization (ASU-MOPSO) algorithm to improve the convergence and diversity of the multi-objective particle swarm optimization. In the process of the elite reduction, we utilize the asynchronous grid strategy to filter particles since this strategy has lower computing complexity. Meanwhile, the stepwised Euclidean crowding distance strategy is presented to filter particles within every grid, which uses the sum of the Euclidean distance with the two nearest particles to replace of the traditional crowding distance. This strategy can avoid the destruction of distribution diversity. Finally, our algorithm is successfully applied for the actual power transmission and transformation project establishing and decision-making problem. Comparing with traditional MOPSO based on crowding distance strategy and grid strategy, our algorithm can obtain the better solution.
Zero Skew Clock Routing in X-architecture Based on an Improved Greedy Matching Algorithm

Weixiang Shen,Yici Cai,Xianlong Hong,Jiang Hu,Bing Lu

DOI: https://doi.org/10.1016/j.vlsi.2007.10.004

IF: 1.345

2007-01-01

Integration

Abstract:As technology advances into nanometer territory, clock network layout plays an increasingly important role in determining circuit quality indicated by timing, power consumption, cost, power supply noise and tolerance to process variation. To alleviate the challenges to the existing routing algorithms due to the continuous increase of the problem size and the high-performance requirement, X-architecture has been proposed and applied to routing in that it can reduce wirelength and via counts, and thus improves the performance and routability compared with the conventional Manhattan routing. In this paper, we investigate zero skew clock routing using X-architecture based on an improved greedy matching algorithm (GMZSTX). The fitted Elmore delay model is employed to improve the accuracy over the Elmore delay model. The interactions among distance, delay balance and load balance are analyzed. Based on this analysis, an effective and efficient greedy matching scheme is suggested to reduce wire snaking and to get a more balanced clock tree. The proposed algorithm is simple and fast for practical applications. Experimental results on benchmark circuits show that our algorithm (GMZSTX) achieves a reduction of 8.15% in total wirelength, 30.19% in delay and 55.31% in CPU time on average compared with zero skew clock routing in the Manhattan plane (BB + DME-2, which means using the top-down balanced bipartition (BB) method [T.H. Chao, Y.C. Hsu, J.M. Ho, et at., Zero skew routing with minimum wirelength, IEEE Trans. Circuits Syst. II-Analog & Digital Signal Process 39 (11) (1992) 799-814] to generate the tree topology and using the Deferred-Merge Embedding (DME) algorithm [T.H. Chao, Y.C. Hsu, J.M. Ho, et al., Zero skew routing with minimum wirelength, IEEE Trans. Circuits Syst. II-Analog & Digital Signal Process 39 (11) (1992) 799-814] to embed the internal nodes), and reduces delay and CPU time by 17.44% and 62.21% on average over the BB + DME-4 method (which is similar to BB + DME-2, but routing in X-architecture). Our SPICE simulation further verifies the correctness of the resulting clock tree. (C) 2007 Elsevier B.V. All rights reserved.
A Steiner tree construction method for flexibility and congestion optimization

kun ma,qiang zhou,yici cai,chunyang zhang,ziyang qi

DOI: https://doi.org/10.1109/ICCCAS.2013.6765397

2013-01-01

Abstract:Global routers usually decompose nets through rectilinear Steiner minimal tree (RSMT) construction. The controllability and predictability on the congestion and routability for a global router depends on the impact of congestion and flexibility in RSMT. FLUTE (Chu and Wong, 2005) is widely used to construct Steiner tree due to its fast speed and minimal wire length. However, it fails to incorporate congestion as it relies on a fast lookup table which does not consider congestion but merely wire length. Although it tries to fix the problem by extending FLUTE (Chu and Wong, 2005) to congestion-driven Steiner tree (Pan and Chu, 2006), but it does not totally work because of its inaccurate average congestion cost of Hannan grid lines and limited effect of edge shifting. In addition, FLUTE (Chu and Wong, 2005) does not currently exploit tree flexibility. In this paper, we propose a Steiner tree construction method called Fthu for flexibility and congestion optimization to a net. Fthu is a two-stage approach by leveraging FLUTE (Chu and Wong, 2005). The first stage focuses on increasing flexibility and decreasing congestion by applying edge shrinking and reformed edge shifting techniques while keeping Steiner tree topology unchanged. In the second stage, a technique called MMER breaks the congested Steiner tree and reconnects the tree in MST-biased way. It can help to decrease congestion and via number. Experimental results show that Fthu generates a solution with 32% and 5% less congestion compared to FLUTE (Chu and Wong, 2005) and congestion-driven Steiner tree in (Pan and Chu, 2006) respectively, with nearly the same total wire length as that in (Chu and Wong, 2005).

Impact of heat treatment on miscibility of proteins and disaccharides in frozen solutions.

Timing-Driven Obstacle-Avoiding X-Architecture Steiner Minimum Tree Algorithm With Slack Constraints

A novel particle swarm optimizer with multi-stage transformation and genetic operation for VLSI routing

Performance-driven X-architecture Routing Algorithm for Artificial Intelligence Chip Design in Smart Manufacturing

A Full-Scale Solution to the Rectilinear Obstacle-Avoiding Steiner Problem

An O ( N Log N ) Algorithm for Obstacle-Avoiding Routing Tree Construction in the Λ-Geometry Plane

Obstacle-Avoiding Rectilinear Minimum-Delay Steiner Tree Construction Towards Ip-Block-Based Soc Design

An-OARSMan

Graph Steiner tree construction and its routing applications

Spanning graph-based nonrectilinear steiner tree algorithms

Lambda-Oat: Lambda-Geometry Obstacle-Avoiding Tree Construction with O (N Log N) Complexity

A Robust Multilayer X-Architecture Global Routing System Based on Particle Swarm Optimization

ACO-Steiner: Ant Colony Optimization Based Rectilinear Steiner Minimal Tree Algorithm

FORst: A 3-Step Heuristic For Obstacle-avoiding Rectilinear Steiner Minimal Tree Construction ?

CDCtree: Novel Obstacle-Avoiding Routing Tree Construction Based on Current Driven Circuit Model

An Efficient 2-Step Heuristics for Rectilinear Steiner Minimal Tree Construction among Obstacles

A routing paradigm with novel resources estimation and routability models for x-architecture based physical design

Steiner Tree Based Routing Algorithm In Consideration Of Optical Proximity Correction

Power Transmission and Transformation Project Establishing and Decision-Making Based on ASU-MOPSO Algorithm

Zero Skew Clock Routing in X-architecture Based on an Improved Greedy Matching Algorithm

A Steiner tree construction method for flexibility and congestion optimization