Embryonic development characteristics and host mussel utilization of flat bitterling Acheilognathus rhombeus (Cyprinidae) during winter in Korea

H. Kim,Hye-sung Choi,J. Park

DOI: https://doi.org/10.1007/s10641-017-0680-4

Environmental Biology of Fishes

Abstract:

What problem does this paper attempt to address?

On the role and challenges of CFD in the aerospace industry

P. R. Spalart,V. Venkatakrishnan

DOI: https://doi.org/10.1017/aer.2015.10

2016-01-01

The Aeronautical Journal

Abstract:ABSTRACT This article examines the increasingly crucial role played by Computational Fluid Dynamics (CFD) in the analysis, design, certification, and support of aerospace products. The status of CFD is described, and we identify opportunities for CFD to have a more substantial impact. The challenges facing CFD are also discussed, primarily in terms of numerical solution, computing power, and physical modelling. We believe the community must find a balance between enthusiasm and rigor. Besides becoming faster and more affordable by exploiting higher computing power, CFD needs to become more reliable, more reproducible across users, and better understood and integrated with other disciplines and engineering processes. Uncertainty quantification is universally considered as a major goal, but will be slow to take hold. The prospects are good for steady problems with Reynolds-Averaged Navier-Stokes (RANS) turbulence modelling to be solved accurately and without user intervention within a decade – even for very complex geometries, provided technologies, such as solution adaptation are matured for large three-dimensional problems. On the other hand, current projections for supercomputers show a future rate of growth only half of the rate enjoyed from the 1990s to 2013; true exaflop performance is not close. This will delay pure Large-Eddy Simulation (LES) for aerospace applications with their high Reynolds numbers, but hybrid RANS-LES approaches have great potential. Our expectations for a breakthrough in turbulence, whether within traditional modelling or LES, are low and as a result off-design flow physics including separation will continue to pose a substantial challenge, as will laminar-turbulent transition. We also advocate for much improved user interfaces, providing instant access to rich numerical and physical information as well as warnings over solution quality, and thus naturally training the user.
Progress and future prospects of CFD in aerospace—Wind tunnel and beyond

Kozo Fujii

DOI: https://doi.org/10.1016/j.paerosci.2005.09.001

IF: 8.934

2005-08-01

Progress in Aerospace Sciences

Abstract:A historical perspective of computational fluid dynamics (CFD) in aerospace in the last 30 years is firstly given. It is shown that there still remain a number of problems that are geometrically simple but difficult to simulate even after many simulations were conducted over complex body configurations. The fact indicates that CFD research is now in the “specific phase” and requires some innovation.The innovation includes “evolutionary effort” and “revolutionary effort”. As an example of evolutionary effort, large eddy simulations/ Reynolds-averaged Navier–Stokes simulations (LES/RANS) hybrid method and its application examples are presented. A shift from RANS to LES/RANS hybrid method occurs not because of the advancement of computers but because of our recognition that separated flows are inherently unsteady and successful simulations require LES-like computations.Comment is given that there may be other types of research necessary to make CFD a real useful tool for a design in addition to simply showing CFD capability for complex body configurations. As one of the examples, construction of a CFD database is presented. Another issue is to make CFD infrastructures so that people outside CFD community may use CFD as a tool to formulate or refine their ideas.To find out revolutionary effort, the message given by Prof. Dean Chapman in 1977 is referred. Observation of current CFD research reveals that evaluation methods of “scale effect” that were believed to be the most important benefit of CFD have not yet been established. Such establishment is the key for the revolution of CFD and researchers need to focus their effort on the development of technologies to evaluate scale effect. Only with such new CFD technologies can “conceptual design with CFD” become feasible.

engineering, aerospace
A Perspective on the State of Aerospace Computational Fluid Dynamics Technology

Mori Mani,Andrew J. Dorgan

DOI: https://doi.org/10.1146/annurev-fluid-120720-124800

IF: 27.7

2023-01-20

Annual Review of Fluid Mechanics

Abstract:Over the past several decades, computational fluid dynamics has been increasingly used in the aerospace industry for the design and study of new and derivative aircraft. In this review we survey the CFD application process and note its place and importance within the everyday work of industry. Furthermore, the centrality of geometry and importance of turbulence models, higher-order numerical algorithms, output-based mesh adaptation, and numerical design optimization are discussed. Challenges in each area are noted and specific suggestions for investment are made. The review concludes with an outlook toward a future in which certification by analysis and model-based design are standard practice, along with a reminder of the steps necessary to lead the industry there.

mechanics,physics, fluids & plasmas
Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

ShiYi Chen,YingChun Chen,ZhenHua Xia,Kun Qu,YiPeng Shi,ZuoLi Xiao,QiuHong Liu,QingDong Cai,Feng Liu,Cunbiao Lee,RiKui Zhang,JinSheng Cai

DOI: https://doi.org/10.1007/s11433-013-4990-z

2013-01-01

Science China Physics Mechanics and Astronomy

Abstract:With the development of computational power and numerical algorithms,computational fluid dynamics（CFD） has become an important strategy for the design of aircraft,which significantly reduces the reliance on wind-tunnel and flight tests.In this paper,we conducted a numerical investigation on the flow past a full commercial aircraft at Mach number 0.2 and 14 degrees angle of attack by means of Reynolds-averaged Navier-Stokes（RANS）,detached-eddy simulation（DES） and our newly developed constrained large-eddy simulation（CLES）.The objective of this paper is to study the capability of these models in simulating turbulent flows.To our knowledge,this is the first large-eddy simulation method for full commercial aircraft simulation.The results show that the CLES can predict the mean statistical quantities well,qualitatively consistent with traditional methods,and can capture more small-scale structures near the surface of the aircraft with massive separations.Our study demonstrates that CLES is a promising alternative for simulating real engineering turbulent flows.
Computational Fluid Dynamics: its Carbon Footprint and Role in Carbon Emission Reduction

Xiang I A Yang,Wen Zhang,Mahdi Abkar,William Anderson

2024-02-08

Abstract:Turbulent flow physics regulates the aerodynamic properties of lifting surfaces, the thermodynamic efficiency of vapor power systems, and exchanges of natural and anthropogenic quantities between the atmosphere and ocean, to name just a few applications. The dynamics of turbulent flows are described via numerical integration of the non-linear Navier-Stokes equation -- a procedure known as computational fluid dynamics (CFD). At the dawn of scientific computing in the late 1950s, it would be many decades before terms such as ``carbon footprint'' or ``sustainability'' entered the lexicon, and longer still before these themes attained national priority throughout advanced economies. This paper introduces a framework designed to calculate the carbon footprint of CFD and its contribution to carbon emission reduction strategies. We will distinguish between "hero" and "routine" calculations, noting that the carbon footprint of hero calculations is largely determined by the energy source mix utilized. We will also review CFD of flows where turbulence effects are modeled, thus reducing the degrees of freedom. Estimates of the carbon footprint are presented for such fully- and partially-resolved simulations as functions of turbulence activity and calculation year, demonstrating a reduction in carbon emissions by two to five orders of magnitude at practical conditions. Beyond analyzing CO2 emissions, we quantify the benefits of applying CFD towards overall carbon emission reduction. The community's effort to avoid redundant calculations via turbulence databases merits particular attention, with estimates indicating that a single database could potentially reduce CO2 emissions by approximately O(1) million metric tons. Additionally, implementing CFD in the fluids industry has markedly decreased dependence on wind tunnel testing, which is anticipated to lead to CO2 emission reduction.

Physics and Society
The Status of Computational Fluid Dynamics

Peter Vilhelm Nielsen,Li Liu,Lei Peng,Yuguo Li

2016-01-01

Abstract:Computational fluid dynamics (CFD) was first introduced in the building ventilation industry in the 1970s. Since then, it has been increasingly used as testified by the growth of the number of peer-reviewed articles, which was less than 10 per year in the 1990s and 60 to 70 per year in the recent years. The CFD market for all different types of fluid flow indicates now a level of at least USD 700 million per year with an annual growth rate of 13%.This article presents a short discussion of the development of CFD by showing two examples: an early case and a recent study on the cross-infection risks from a person’s exhalation of particles. The article will also address the use of benchmark tests as a quality control of CFD.
Combustion Simulation with Particular Reference to Green Aviation

Yao Zheng,Jianfeng Zou,Shuai Zhang

2014-01-01

Abstract:With the fast development of the aviation transportation, the emission (NOx, CO, UHC, CO2, smoke particle and contrails) of the civil aeroengine using the hydrocarbon fuel has damaged the environment tremendously. Especially, the NOx and CO2 have a big contribution to the global warming. In order to greatly reduce the damage of the civil aeroengine to the environment, ACARE (Advisory Council for Aeronautical Research in Europe) has published the 2020 annual target, i.e., the 80 percents reduction of NOx, 50 percents reduction of CO2 per passenger per kilometer, and 20 db reduction of the noise. In order to achieve the ACARE 2020 annual target, one key technology is low emission combustion technology.
A perspective on the past, the present, and the future of computational fluid dynamics (CFD) in flow chemistry

Natan Padoin,Tatiana Matiazzo,Humberto Gracher Riella,Cíntia Soares

DOI: https://doi.org/10.1007/s41981-024-00313-4

2024-02-17

Journal of Flow Chemistry

Abstract:Flow chemistry is the future of chemical processing. It represents a significant advance in energy consumption and waste generation regarding operations in batch and continuous flow macroscopic equipment since the transport rate (of mass, heat, photons, electrons, etc.) is tremendously intensified. In parallel, computational fluid dynamics (CFD) is part of engineering's future. Digitalization of transport processes (involving fluid flow and scalar transport, e.g., species, energy, etc.) is the state-of-the-art for designing, optimizing, and scaling chemical reactors, separation and purification units, heat exchangers, etc. This perspective initially presents relevant fundamental CFD concepts applicable to any field. In the sequence, an overview of applications of CFD in flow chemistry reported in the literature over the last two decades is presented, highlighting the evolution of complexity and variety of topics investigated (ranging from single-phase flow optimization to multiphysics cases involving coupling of multiphase flow and external forces—e.g., ultrasound and electric field). Next, the contributions of our research group in CFD in flow chemistry are presented—with a focus on photocatalytic and electrocatalytic systems—and accompanied by highlights about our personal experience. Further discussion about strengths, limitations, and opportunities for CFD in flow chemistry is presented, highlighting to the reader the gaps that should be in the spotlight over the next few years, followed by our final remarks. After reading this perspective, the reader (either a starter in this field or an expert) will be able to identify how CFD has evolved in flow chemistry over the years and what are the next directions from the authors' point of view.

chemistry, multidisciplinary
Emissions of future conventional aircrafts adopting evolutionary technologies

Alencar Bravo,Darli Vieira,Geraldo Ferrer

DOI: https://doi.org/10.1016/j.jclepro.2022.131246

2022-05-01

Abstract:The current aviation sector has been shaken by COVID-19, but a few years prior, the industry was experiencing a time of prosperity never seen before. These years were marked by the introduction of new models and record sales. In particular, two cases stood out from the rest: the Boeing 737 MAX and the Airbus A320neo. Such overwhelming success in sales was partly because in essence, these are quite traditional and familiar aircrafts that featured improvements in some critical systems, notably in the use of newer engines. Current projections suggest that the pre-COVID growth rate of aviation will resume in a few years, which raises global concerns regarding the ecological burden of conventional aircraft and their resulting limitations. By reviewing the green technologies likely to be incorporated into conventional aviation over the next 30 years, we explore the limits of the industry's current approach. To this end, we reconstruct an already validated life cycle analysis model to assess a fleet of aircraft and analyze the impacts of these new technologies on emissions. Based on data from the literature, predictions are made for optimistic and pessimistic scenarios in a post-COVID world. The results are compared with the globally established targets set by the International Air Transport Association (IATA). Simulations show that a future based solely on conventional aircrafts using evolutionary technologies is of great concern. There is a need to promote a radical departure from the current aviation models to accommodate the growing demand for aviation with a green future.
Towards a new paradigm in intelligence-driven computational fluid dynamics simulations

Xinhai Chen Zhichao Wang Liang Deng Junjun Yan Chunye Gong Bo Yang Qinglin Wang Qingyang Zhang Lihua Yang Yufei Pang Jie Liu a Science and Technology on Parallel and Distributed Processing Laboratory,National University of Defense Technology,Changsha,People's Republic of Chinab Laboratory of Digitizing Software for Frontier Equipment,National University of Defense Technology,Changsha People's Republic of Chinac China Aerodynamics Research and Development Center,Mianyang,People's Republic of China

DOI: https://doi.org/10.1080/19942060.2024.2407005

IF: 6.519

2024-09-27

Engineering Applications of Computational Fluid Mechanics

Abstract:Computational Fluid Dynamics (CFD) plays a crucial role in investigating new physical phenomena and exploring the principles of fluid mechanics. However, CFD numerical methods often face the challenges of long research cycles, high costs, and extensive human-computer interactions due to the growing complexity of computational tasks. To meet the burgeoning requirements of contemporary physical sciences, in recent years, the coupling of traditional scientific computing techniques with promising deep learning techniques well-known from computer science have emerged as a new research paradigm. This paradigm aims to create automated, intelligent tools for obtaining valuable insights as well as being able to categorize, predict, and make evidence-based decisions in novel ways. These tools can be used to reduce the reliance on expert experience and laborious computations inherent in existing numerical theories and methods. In this paper, we delve into the essence of science paradigms, the evolution of computing intelligence, and provide a comprehensive overview of the key applications driving the development of a new intelligence paradigm in CFD simulations. In addition, we outline a prototype platform for CFD simulations within this new paradigm. Based on this platform, three intelligent workflows are proposed, anticipating to serve as a reference source for future research and foster the emergence of innovative applications in the field of CFD.

engineering, mechanical,mechanics, multidisciplinary
Fleet-Level Environmental Assessments for Feasibility of Aviation Emission Reduction Goals

Kolawole Ogunsina,Hsun Chao,Nithin Jojo Kolencherry,Samarth Jain,Kushal Moolchandani,Daniel DeLaurentis,William Crossley

DOI: https://doi.org/10.48550/arXiv.2210.11302

2022-09-16

Physics and Society

Abstract:The International Air Transport Association (IATA) is one of several organizations that have presented goals for future CO2 emissions from commercial aviation with the intent of alleviating the associated environmental impacts. These goals include attaining carbon-neutral growth in the year 2020 and total aviation CO2 emissions in 2050 equal to 50% of 2005 aviation CO2 emissions. This paper presents the use of a simulation-based approach to predict future CO2 emissions from commercial aviation based upon a set of scenarios developed as part of the Aircraft Technology Modeling and Assessment project within ASCENT, the FAA Center of Excellence for Alternative Jet Fuels and the Environment. Results indicate that, in future scenarios with increasing demand for air travel, it is difficult to reduce CO2 emissions in 2050 to levels equal to or below 2005 levels, although neutral CO2 growth after 2020 may be possible.
Application of Computational Fluid Dynamics to Address Environmental and Buildings Design Challenges

N. Al-Khalidy

Abstract:Challenges facing commercial and high profile building projects are to achieve mandated local government and buildings codes for energy, ventilation, air quality, pedestrian wind comfort, thermal comfort and other specialist building services while meeting organisational objective to maximum return on investment. This paper introduces the role of Computational Fluid Dynamics (CFD) as a sophisticated thermo-fluid modelling method to solve building design problems and optimise the design of buildings. Case studies are provided for a number of topics including thermal comfort, combined internal-external air flow assessment, wind driven rain, pollutant dispersion study and natural ventilation design applications. The paper also discusses the application of CFD for entire city modelling. The use of CFD for entire city modelling will be a useful tool to help urban designers and environmental planners. Key-Words: CFD, Building Design, Wind, Ventilation, Thermal Comfort, Air Quality, Urban Design

Engineering,Environmental Science
Aerodatabase Development and Integration and Mission Analysis of a Mach 2 Supersonic Civil Aircraft

Pietro Roncioni,Marco Marini,Oscar Gori,Roberta Fusaro,Nicole Viola

DOI: https://doi.org/10.3390/aerospace11020111

IF: 2.66

2024-01-26

Aerospace

Abstract:The request for faster and greener civil aviation is urging the worldwide scientific community and aerospace industry to develop a new generation of supersonic aircraft, which are expected to be environmentally sustainable and to guarantee a high-level protection of citizens. A key aspect to monitor the potential environmental impact of new configurations is the aerodynamic efficiency and its impact onto the real mission. To pursue this goal, this paper discloses increasing-fidelity aerodynamic modeling approaches to improve the conceptual design of high-speed vehicles. The disclosed methodology foresees the development of aerodynamic aerodatabases by means of incremental steps starting from simplified methods (panels methods and/or low-fidelity CFD simulations) up to very reliable data based on high-fidelity CFD simulations and experimental measurements with associated confidence levels. This multifidelity approach enables the possibility of supporting the aircraft design process at different stages of its design cycle, from the estimation of preliminary aerodynamic coefficients at the beginning of the conceptual design, up to the development of tailored aerodatabases at advanced design phases. For each design stage, a build-up approach is adopted, starting from the investigation of the clean external configuration up to the complete one, including control surfaces' effects and, if any, the effects of the integration of the propulsive effects. In addition, the applicability of the approach is guaranteed for a wide range of supersonic and hypersonic aircraft, and the developed methodology is here applied to the characterization of Mach 2 aircraft configuration, a relevant case study of the H2020 MORE&LESS project.

engineering, aerospace
Contribution of computational wind engineering in train aerodynamics—past and future

Hassan Hemida

DOI: https://doi.org/10.1016/j.jweia.2023.105352

IF: 4.437

2023-03-04

Journal of Wind Engineering and Industrial Aerodynamics

Abstract:This paper provides an overview to all the published computational work in the Journal of Wind Engineering and Industrial Aerodynamics in the field of train aerodynamics since 1992. It has been found that in early nineties the computational power was limited and thus simplified potential flow solves and 1D codes were the main tools for train aerodynamics. Solution of the fully viscus and turbulent flow for train aerodynamics was limited to 2D cases using the steady RANS solvers on coarse meshes. In later nineties, the increase in computational power allowed for the solution of the fully turbulent flow around 3D models of high-speed trains using RANS models. Recently and due to the significant increase in computational power, the high fidelity Detached Eddy Simulations (DES) and Large Eddy Simulations became the computational methods for the different issues in train aerodynamics. It has been found that although computational wind engineering (CWE) contributed significantly in the development of new high-speed trains in the past thirty years, there are still number of emerging issues in the aerodynamics of high-speed trains that require considerable investigations by the CWE community.

mechanics,engineering, civil
Exploring Vehicle Level Benefits of Revolutionary Technology Progress Via Aircraft Design and Optimization

Yaolong Liu,Ali Elham,Peter Horst,Martin Hepperle

DOI: https://doi.org/10.3390/en11010166

IF: 3.2

2018-01-01

Energies

Abstract:It is always a strong motivation for aeronautic researchers and engineers to reduce the aircraft emissions or even to achieve emission-free air transport. In this paper, the impacts of different game-changing technologies together on the reduction of aircraft fuel consumption and emissions are studied. In particular, a general tool has been developed for the technology assessment, integration and also for the overall aircraft multidisciplinary design optimization. The validity and robustness of the tool has been verified through comparative and sensitivity studies. The overall aircraft level technology assessment and optimization showed that promising fuel efficiency improvements are possible. Though, additional strategies are required to reach the aviation emission reduction goals for short and medium range configurations.
Simulating Microscale Urban Airflow and Pollutant Distributions Based on Computational Fluid Dynamics Model: A Review

Qian Liang,Yucong Miao,Gen Zhang,Shuhua Liu

DOI: https://doi.org/10.3390/toxics11110927

2023-11-13

Toxics

Abstract:Urban surfaces exert profound influences on local wind patterns, turbulence dynamics, and the dispersion of air pollutants, underscoring the critical need for a thorough understanding of these processes in the realms of urban planning, design, construction, and air quality management. The advent of advanced computational capabilities has propelled the computational fluid dynamics model (CFD) into becoming a mature and widely adopted tool to investigate microscale meteorological phenomena in urban settings. This review provides a comprehensive overview of the current state of CFD-based microscale meteorological simulations, offering insights into their applications, influential factors, and challenges. Significant variables such as the aspect ratio of street canyons, building geometries, ambient wind directions, atmospheric boundary layer stabilities, and street tree configurations play crucial roles in influencing microscale physical processes and the dispersion of air pollutants. The integration of CFD with mesoscale meteorological models and cutting-edge machine learning techniques empowers high-resolution, precise simulations of urban meteorology, establishing a robust scientific basis for sustainable urban development, the mitigation of air pollution, and emergency response planning for hazardous substances. Nonetheless, the broader application of CFD in this domain introduces challenges in grid optimization, enhancing integration with mesoscale models, addressing data limitations, and simulating diverse weather conditions.

environmental sciences,toxicology
An Exploration of Flow Control Using Machine Learning and Computational Fluid Dynamics

Matthew Cornfield,Karen Bradshaw

DOI: https://doi.org/10.59200/icarti.2023.017

2023-11-09

Abstract:Although numerous studies relating to computational fluid dynamics and machine learning have been conducted in relation to automotive development, the majority focus on either early development using completed 3D models, or the final testing stages of development, or machine learning accelerated computational fluid dynamic simulations. While this approach is helpful in software development and simulation, it is not easily adaptable to automotive design where the final model is constantly changing and being modified. Consequently, the aim of this study is to propose a method for conducting computational fluid dynamics and machine learning concurrently to accelerate the development process. The proposed method is used to design and improve the aerodynamic efficiency of an object. The approach focuses on developing, implementing, and comparing machine learning models capable of generating optimised three-dimensional objects with the required geometry to direct airflow paths required in applications such as pressure generation, as needed for both active and passive flow control. The study concludes that both decision tree regression and long short-term memory (LSTM) autoencoder models could be used to optimise the aerodynamic efficiency of solid bodies, but that the LSTM autoencoder performs better overall. An undesirable effect of the shape optimisation is an overall reduction in shape size as optimization increases.
CFD and ventilation research

Y. Li,P. V. Nielsen

DOI: https://doi.org/10.1111/j.1600-0668.2011.00723.x

IF: 6.5539

2011-07-04

Indoor Air

Abstract:There has been a rapid growth of scientific literature on the application of computational fluid dynamics (CFD) in the research of ventilation and indoor air science. With a 1000-10,000 times increase in computer hardware capability in the past 20 years, CFD has become an integral part of scientific research and engineering development of complex air distribution and ventilation systems in buildings. This review discusses the major and specific challenges of CFD in terms of turbulence modelling, numerical approximation, and boundary conditions relevant to building ventilation. We emphasize the growing need for CFD verification and validation, suggest ongoing needs for analytical and experimental methods to support the numerical solutions, and discuss the growing capacity of CFD in opening up new research areas. We suggest that CFD has not become a replacement for experiment and theoretical analysis in ventilation research, rather it has become an increasingly important partner.PRACTICAL IMPLICATIONS: We believe that an effective scientific approach for ventilation studies is still to combine experiments, theory, and CFD. We argue that CFD verification and validation are becoming more crucial than ever as more complex ventilation problems are solved. It is anticipated that ventilation problems at the city scale will be tackled by CFD in the next 10 years.

engineering, environmental,public, environmental & occupational health,construction & building technology
Advances of Computational Fluid Dynamics (CFD) applications in agricultural building modelling: Research, applications and challenges

Pierre-Emmanuel Bournet,Fernando Rojano

DOI: https://doi.org/10.1016/j.compag.2022.107277

IF: 8.3

2022-10-01

Computers and Electronics in Agriculture

Abstract:Computational Fluid Dynamics (CFD) approach is a versatile technique being applied to multiple areas of knowledge. CFD approach has contributed to comprehensively understand the complexity of biological systems and it has gained relevance since the end of the twentieth century. CFD became the key approach to replicate spatiotemporal phenomena combining fundamentals of physics, chemistry and biology. A considerable development derived from numerous CFD studies has been accomplished in a large range of applications in agriculture such as biological systems, and in agricultural buildings in particular. This paper provides an examination of recent progress (last 2 decades) in CFD studies, mainly applied to greenhouses and livestock buildings with the aim to depict current status and trends and potential research directions. Current status comprises CFD applied to regional and local climate, housing design and operation and animal or plant interaction with its surroundings. Integrating different scales from animal or plant physiologic responses to an agricultural building and to a region, CFD capabilities have made it possible to considerably improve the realism of simulations. Applications also cover a focus on specific equipments with the aim to assess benefits on energy and water fluxes. Additionally, the issues of validation and reliability of CFD simulations are addressed as well as the perspective of coupling CFD to operational devices or decision-making systems, based on ICT, IoT, or Artificial Intelligence.

agriculture, multidisciplinary,computer science, interdisciplinary applications
Application of computational fluid dynamics in subway environment without fire and smoke-Literature review

Yunlong Peng,Zhi Gao,Wowo Ding,Jianshun Zhang,Xiaozhao Li,Jinfeng Xu,Yanli Wei

DOI: https://doi.org/10.1016/j.buildenv.2021.108408

IF: 7.093

2021-01-01

Building and Environment

Abstract:As more megacities emerge owing to urbanization and industrialization, the subway has become the main public transportation mode worldwide, providing punctuality and convenience. The subway environment, including its ventilation, thermal comfort, air quality, and energy consumption, remains an area of great focus for scientists and passengers. In addition to theoretical and experimental methods, computational fluid dynamics (CFD) has been used in past decades to predict 3D airflows, temperatures, and pollutant dispersion in subway tunnels, stations, and cabins. In this review, recent applications of CFD involving three scenarios-subway tunnels, stations, and passenger cabins-and two objective parameters-particulate matter, and energy savings till 2021-are systematically presented. The boundary conditions, validation methods, turbulence models, and mesh information are summarized. Finally, the possibilities regarding novel models, open-source CFD codes, and best practice guidelines are discussed with the aim to predict future perspectives on the subway environment.

Embryonic development characteristics and host mussel utilization of flat bitterling Acheilognathus rhombeus (Cyprinidae) during winter in Korea

On the role and challenges of CFD in the aerospace industry

Progress and future prospects of CFD in aerospace—Wind tunnel and beyond

A Perspective on the State of Aerospace Computational Fluid Dynamics Technology

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Computational Fluid Dynamics: its Carbon Footprint and Role in Carbon Emission Reduction

The Status of Computational Fluid Dynamics

Combustion Simulation with Particular Reference to Green Aviation

A perspective on the past, the present, and the future of computational fluid dynamics (CFD) in flow chemistry

Emissions of future conventional aircrafts adopting evolutionary technologies

Towards a new paradigm in intelligence-driven computational fluid dynamics simulations

Fleet-Level Environmental Assessments for Feasibility of Aviation Emission Reduction Goals

Application of Computational Fluid Dynamics to Address Environmental and Buildings Design Challenges

Aerodatabase Development and Integration and Mission Analysis of a Mach 2 Supersonic Civil Aircraft

Contribution of computational wind engineering in train aerodynamics—past and future

Exploring Vehicle Level Benefits of Revolutionary Technology Progress Via Aircraft Design and Optimization

Simulating Microscale Urban Airflow and Pollutant Distributions Based on Computational Fluid Dynamics Model: A Review

An Exploration of Flow Control Using Machine Learning and Computational Fluid Dynamics

CFD and ventilation research

Advances of Computational Fluid Dynamics (CFD) applications in agricultural building modelling: Research, applications and challenges

Application of computational fluid dynamics in subway environment without fire and smoke-Literature review