Abstract:The Boulby UnderGround Screening (BUGS) facility, located at the Boulby Underground Laboratory, has significantly advanced its material screening capabilities by installing two XIA UltraLo-1800 alpha particle detectors. This study presents a comprehensive evaluation of one of these detectors, operated 1,100 meters underground at the Boulby Underground Laboratory, which provides significant shielding from cosmic radiation and maintains a low ambient radon activity of 2.30 $\pm$ 0.03 Bq/m$^3$. Our evaluation focuses on energy reconstruction accuracy, background radiation rates, and operational stability. The XIA UltraLo-1800 detector demonstrates remarkable stability in energy reconstruction, with less than 0.1 MeV variation over four years. Moreover, the implementation of a graphite-filled PTFE liner in the sample tray resulted in a significant reduction in background radiation levels compared to measurements with the original stainless steel tray, achieving an average activity of 0.15 $\pm$ 0.01 $\alpha$/cm$^2$/khr. Copper sample assays, performed before and after radon exposure, demonstrated the detector's ability to accurately identify and quantify $^{210}$Po contamination. By implementing the robust cleanliness procedures and protocols described in this article, we observed a reduction in $^{210}$Po activity from 0.504 $\pm$ 0.022 mBq to 0.336 $\pm$ 0.013 mBq, highlighting the crucial role of refined cleaning methods in minimizing background for sensitive experiments. Additionally, observations of elevated background activity levels post-high-activity sample measurements illustrate the need for careful management of assay conditions and environment to maintain low background levels. These results highlight the potential of the XIA UltraLo-1800 in enhancing the precision of material assays essential for reducing background interference in rare event experiments.

Evaluation and mitigation of trace $^{210}$Pb contamination on copper surfaces

Identification of $^{210}$Pb and $^{210}$Po in the bulk of copper samples with a low-background alpha particle counter

Exploration of Methods to Remove Implanted $^{210}$Pb and $^{210}$Po Contamination from Silicon Surfaces

A Review and Outlook for the Removal of Radon-Generated Po-210 Surface Contamination

Behavior of the 222Rn daughters on copper surfaces during cleaning

Tracing Copper Derived from Pig Manure in Calcareous Soils and Soil Leachates by 65cu Labeling

Co-precipitation approach to measure amount of $^{238}$U in copper to sub-ppt level using ICP-MS

A convenient approach to $10^{-12}~g/g$ ICP-MS limits for Th and U in Aurubis electrolytic NA-ESN brand copper

Direct method for the quantitative analysis of surface contamination on ultra-low background materials from exposure to dust

Radon daughter removal from PTFE surfaces and its application in liquid xenon detectors

Studies on the Reduction of Radon Plate-Out

Trace elements and Pb isotopes in soils and sediments impacted by uranium mining

Evaluation of SNOLAB background mitigation procedures through the use of an ICP-MS based dust monitoring methodology

Removal of long-lived $^{222}$Rn daughters by electropolishing thin layers of stainless steel

Assay methods for U-238, Th-232, and Pb-210 in lead and calibration of Bi-210 bremsstrahlung emission from lead

Enhancing Material Screening at Boulby Underground Laboratory with XIA UltraLo-1800 Alpha Particle Detectors

Recent progresses in analytical method development for 210Pb in environmental and biological samples

Radon Daughter Plate-out Measurements at SNOLAB for Polyethylene and Copper

Tracing the impact of former uranium mine sites using stable Pb isotopes: A review

Pb isotopic fingerprinting of uranium pollution: New insight on uranium transport in stream-river sediments

Radon Daughter Plate-out onto Teflon