Operating parameters analysis of a nitric acid plant to increase production and reduce NOx gases emission

Gabriel R.O. Nascimento,José V.H. Dangelo
DOI: https://doi.org/10.1016/j.cep.2024.109662
IF: 4.264
2024-01-04
Chemical Engineering and Processing - Process Intensification
Abstract:In this work the influence of some operating parameters of a medium pressure nitric acid plant producing 54,000 t/year was studied in order to evaluate its influence over the absorption column efficiency. The target is to increase nitric acid production and reduce NO x emissions. The nitric acid plant was simulated using ProSimPlus HNO 3 . The parameters considered in the analyses were: secondary air molar flow rate; absorption column operating pressure; cooling water temperature and absorption water molar flow rate. Parameters were evaluated individually and the best results were combined in a multi-parameter analysis evaluating different optimized scenarios, including the possibility of increasing the amount of ammonia injected in the system and the addition of a plug flow reactor (PFR), which is a new approach to improve NO oxidation. Considering a base case, the best scenario obtained was able to reduce NO x emissions in 55% while increasing nitric acid production in 18%, using the following set of parameters: 20 kmol.h −1 of additional ammonia; a 40 m 3 PFR; cooling water at 5 °C; 172 kmol.h −1 of absorption water and 345 kmol.h −1 of secondary air. The results obtained in this work contribute to provide practical insights for optimum absorption stage operation in a real nitric acid plant.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?