Abstract:The development of new tools that could meet the demand of sustainable energy production has attracted worldwide scientific attention. Over the past few decades, significant research efforts have been carried out to efficiently reduce water to H2 (green fuel) over semiconductor photocatalysts. Numerous semiconductor photocatalysts have been employed in photocatalysis for optimum H2 production. All the techniques were chosen based on their flexibility, cost-effectiveness, and ease of availability. Recently, polymeric carbon nitride (g-C3N4) received worldwide attention in visible light photocatalysis for energy and environmental applications due to its low price, robust nature, and superior thermal stability. Nevertheless, g-C3N4 (CN) exhibits shortfalls such as high charge carrier's recombination rate and weak reduction ability. To overcome these drawbacks, herein, for the first time we have fabricated B-TiO2/MIL-53(Fe)/CN ternary composite via hydrothermal and wet-chemical methods. The resultant B-TiO2/MIL53(Fe)/CN ternary composite shows drastically improved photocatalytic activity for hydrogen evolution compared to the bare CN, B-TiO2, and MIL53(Fe) components. The B-TiO2/MIL53(Fe)/CN ternary composite produced approximately 166.3 and 581.2 μmol h−1 g−1 of hydrogen under visible light and UV–visible light irradiations, respectively, with the assistance of co-catalyst Pt. Photo-luminescence (PL) and the fluorescence (FL) spectroscopy measurements reveal that the enhanced photoactivity is due to the greatly promoted charge carrier's separation and transfer at the interfacial contact of the well-aligned three-component systems. This work will promote the design and development of efficient photocatalyst based on CN for clean energy production and environmental purification.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to significantly improve the photocatalytic activity of the B - TiO_2/MIL - 53(Fe)/g - C_3N_4 ternary nanocomposite for hydrogen (H_2) production under visible - light and ultraviolet - visible - light irradiation by constructing it and optimizing its band - gap structure. Based on the experimental results, the study explores the potential application value of this new - type composite in photocatalytic hydrogen production and its highly efficient charge - separation mechanism. Specifically, the paper focuses on the following aspects: 1. **Material Synthesis and Characterization**: The B - TiO_2/MIL - 53(Fe)/g - C_3N_4 ternary composite was successfully synthesized by the hydrothermal method and the wet - chemical method, and its detailed structure and chemical composition were characterized, including techniques such as X - ray diffraction (XRD), ultraviolet - visible absorption spectroscopy (UV - Vis), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X - ray photoelectron spectroscopy (XPS) and Fourier - transform infrared spectroscopy (FT - IR). 2. **Photocatalytic Performance Testing**: The photocatalytic hydrogen - production performance of the composite under visible - light and ultraviolet - visible - light irradiation was evaluated and compared with other single - component materials (such as g - C_3N_4, B - TiO_2 and MIL - 53(Fe)), and the results showed that the photocatalytic activity of the ternary composite was significantly improved. 3. **Mechanism Analysis**: Through photoluminescence (PL) and fluorescence (FL) spectral measurements, the separation and transport mechanisms of charge carriers in the ternary composite were revealed, explaining the reason for its high photocatalytic activity. In conclusion, this paper aims to improve the application potential of the B - TiO_2/MIL - 53(Fe)/g - C_3N_4 ternary nanocomposite in photocatalytic hydrogen production by constructing and optimizing it, especially the highly efficient charge - separation and - transport mechanisms under visible - light and ultraviolet - visible - light conditions.

Properly aligned band structures in B-TiO2/MIL53(Fe)/g-C3N4 ternary nanocomposite can drastically improve its photocatalytic activity for H2 evolution: Investigations based on the experimental results

Novel C3N4–CdS Composite Photocatalysts with Organic–inorganic Heterojunctions: in Situ Synthesis, Exceptional Activity, High Stability and Photocatalytic Mechanism

2D/2D Boron/g-C3N4 Nanosheet Heterojunction Boosts Photocatalytic Hydrogen Evolution Performance

G-C3n4/pt/bivo4 Nanocomposites for Highly Efficient Visible-Light Photocatalytic Removal of Contaminants and Hydrogen Generation

In-situ synthesis of ternary heterojunctions via g-C3N4 coupling with noble-metal-free NiS and CdS with efficient visible-light-induced photocatalytic H2 evolution and mechanism insight

Well‐Designed 2D/2D/2D Ternary ZCO/CN/TiC Nanocomposite for Efficient Photocatalytic H2 Production Through Water Splitting Under Visible Light

TiN Bridged All‐Solid Z‐Scheme CNNS/TiN/TiO2−x Heterojunction by a Facile in Situ Reduction Strategy for Enhanced Photocatalytic Hydrogen Evolution

The synthesis of Cu-TCPP MOF/g-C 3 N 4 heterojunctions as efficient photocatalysts for hydrogen generation

Metal-organic frameworks derived TiO2/carbon nitride heterojunction photocatalyst with efficient catalytic performance under visible light

Mesoporous g-C3N4 decorated by Ni2P nanoparticles and CdS nanorods together for enhancing photocatalytic hydrogen evolution

Fabrication of novel Cu2WS4/NiTiO3 heterostructures for efficient visible-light photocatalytic hydrogen evolution and pollutant degradation

Fabrication of Ti3C2/TiO2/SrTiO3 ternary heterojunction photocatalyst with efficient charge separation for enhanced hydrogen evolution

Controllable Interface -Induced Co-Assembly Toward Highly Ordered Mesoporous Pt@Tio2/G-C3n4 Heterojunctions With Enhanced Photocatalytic Performance

Ti3C2 MXene cocatalyst supported Ti3C2/SrTiO3/g-C3N4 heterojunctions with efficient electron transfer for photocatalytic H2 production

When 2D g-C 3 N 4 meets 0D CNQDs and 1D CNTs: A strategy for photocatalytic hydrogen production over a ternary non-metallic catalyst

The Synergetic Effects of Ti3C2 MXene and Pt As Co-Catalysts for Highly Efficient Photocatalytic Hydrogen Evolution over G-C3n4

Rationally Designed Ternary CdSe/WS2/g-C3N4 Hybrid Photocatalysts with Significantly Enhanced Hydrogen Evolution Activity and Mechanism Insight

Enhanced visible light absorption CdS-decorated direct Z-scheme g-C3N4/TiO2 for improved photocatalysis and hydrogen generation

Vertically grown CeO2 and TiO2 nanoparticles over the MIL53Fe MOF as proper band alignments for efficient H2 generation and 2,4-DCP degradation

Structuring dual Z-scheme heterojunction and boosting surface reaction by bifunctional NiCoP modified TiO2/g-C3N4 for improving the photocatalytic activity

Synthesis of ternary Ni2P@UiO-66-NH2/Zn0.5Cd0.5S composite materials with significantly improved photocatalytic H2 production performance