Abstract:The ability to model the cyclic behavior of low yield point steel accurately is essential for its application to seismic design. In this study, uniaxial tests of monotonic and strain controlled cyclic loading are conducted to investigate the mechanical properties of the low yield point steel BLY160. As observed in the test, work-hardening is an important hysteretic characteristic, which significantly influences the energy dissipation capacity of the steel. However, the cyclic softening in both stiffness and stress evolve as the plastic strain accumulates, which is manifested in the decrease of both the stress amplitude and the elastic domain of the stress–strain hysteresis loops. This change in the shape of the cyclic loops is called the “flattening effect” in this paper. To describe the cyclic hardening and softening effect by using one unified set of material parameters, a more sophisticated model based on the concept of internal variables is proposed as an extension of the combined isotropic-kinematic hardening model. The novel idea of a “transformation zone” with the introduction of an additional internal variable is proposed to synchronize the updates of isotropic and kinematic hardening such that the simultaneous change in the stress amplitude and the elastic region can be reproduced. Note that the cyclic softening develops in three stages: incubation, growth and the stabilization period. The logistic function, which presents a curve with an “S” shape, is first used to trace the evolution of the softening. Finally, the model parameters are identified by the test data, and the accuracy of the proposed model is verified by comparing the simulated performance and the experimental response under different loading histories. The results demonstrate that the extended model can elaborately describe the evolutional processes of cyclic hardening and softening by incorporating characteristics, such as the nonlinear transient behavior from elastic to plastic status, early yield under reversed loading and strain history dependence.

Cyclic behavior and hysteretic model of steel ring restrainers

A Simplified Analytical Model for U-shaped Steel Dampers Considering Horizontal Bidirectional Deformation

Modeling Cyclic Behavior of Reinforcing Steel: Relevance in Seismic Response Analysis of Reinforced Concrete Structures

Experimental and numerical study on steel ring restrainers with rectangular section

Experimental Study of Confined Hot-Rolled H-shape Steel Columns under Cyclic Loading

Constitutive model for cyclic behavior of mild steel under various strain amplitudes

Numerical Investigations on Elastic Buckling and Hysteretic Behavior of Steel Angles Assembled Buckling-Restrained Braces

Study on constitutive model of structural steel under cyclic loading

Cyclic experiments and global buckling design of steel-angle-assembled buckling-restrained braces

Experimental and Modeling Study of High-Strength Structural Steel under Cyclic Loading

Cyclic Hardening and Softening Behavior of the Low Yield Point Steel BLY160: Experimental Response and Constitutive Modeling

Constitutive Model of Low-Yield Point Steel and Its Application in Numerical Simulation of Buckling-Restrained Braces

Experimental Study of Structural Steel Constitutive Relationship under Cyclic Loading

Experimental and Constitutive Model Study of Structural Steel under Cyclic Loading

Cyclic Behaviour of Double-Tube Buckling-Restrained Braces for Boiler Steel Plant Structures

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

Performance Testing and Cyclic Behavior of Buckling-Restrained Braces with H Cross Section Unrestrained Segments

A cyclic visco-plastic constitutive model for the ratcheting behavior of U75VG rail steel under a wide range of loading rates

Analysis of Hysteretic Behavior of Buckling-Restrained Brace

Cyclic softening behavior of structural steel with strain range dependence

An improved elasto-plastic constitutive model for the exquisite description of stress-strain hysteresis loops with cyclic hardening and softening effects